FCTN-RLY4-418

FCTN-RLY4-418 Datasheet

FCTN-RLY4-315-2 Relay Function Module 2 - 315MHz

Part	Datasheet
FCTN-RLY4-418	FCTN-RLY4-418 (pdf)

PDF Datasheet Preview
WIRELESS MADE SIMPLE 4-POSITION RELAY FUNCTION MODULE 2 DATA GUIDE The Relay Function Module 2 is a member of the Linx pre-certified OEM product line. The modules have been tested for FCC, Industry Canada, and European CE 433MHz only compliance and can be quickly customized to meet a specific OEM’s labeling requirements. This greatly reduces the time and expense of bringing an RF-based product to market. The Relay Function Modules provide four latched or momentary relay outputs that are capable of switching external AC or DC powered loads of up to 7 amps. The Relay Modules incorporate a Linx LR Series receiver. Selectable addressing Figure 1 Package Dimensions provides security and allows the creation of 256 distinct transmitter / receiver relationships to avoid unwanted interaction when multiple systems are in use. When paired with a compatible Holtek based Linx OEM Handheld transmitter or transmitter module, the Relay Function Module 2 serves as a reliable wireless switching device at distances of up to 750 feet. n FCC, Canada, and CE pre-tested n Wide operational voltage 7 to 30VDC n Dual power inputs n 4 long-life relays, switch AC or DC n Flange-mount case n Quick-attach heavy-duty device connectors n 256 unique addresses n Can be cosmetically customized for OEM applications APPLICATIONS INCLUDE n General Remote Control n Motor Control n Garage / Gate Openers n Lighting Control n Call Systems n Home / Industrial Automation n Wire Elimination ORDERING INFORMATION PART # FCTN-RLY4-315-2 Relay Function Module 2 - 315MHz FCTN-RLY4-418-2 Relay Function Module 2 - 418MHz FCTN-RLY4-433-2 Relay Function Module 2 - 433MHz ELECTRICAL SPECIFICATIONS Parameter POWER SUPPLY Operating Voltage Supply Current RX Only RX and 1 Relay RX and 2 Relays RX and 3 Relays RX and 4 Relays RECEIVER SECTION Receive Frequency Range FCTN-RLY4-315 FCTN-RLY4-418 FCTN-RLY4-433 Center Frequency Accuracy Receiver Sensitivity RELAY CHARACTERISTICS Arrangement Switched Power Relay Switching Voltage Switched Device Current Operate Time Release Time Life Expectancy Mechanical Electrical Contact Dielectric Strength at sea level for 1 minute ENVIRONMENTAL Operating Temperature Range Storage Temperature Range Designation Min. Typical Max. Units Notes -106 -112 -118 SPST watts 4000 1x107 Operations 2 1x105 10A, 277VA 1000Vrms across contacts 1750Vrms contact-to-coil Notes Typical values at 12V and 25°C Max and Min values are over the full voltage and temperature range. Characterized, but not tested. For BER of 10-5 at 1,200bps. RELAY FUNCTION MODULE FEATURES Antenna DC Power Connector 7 to 30VDC “Quick-Connect” Alternate DC Input Switched Device Connectors Address Selector DIP Switches Figure 2 Relay Module Features THEORY OF OPERATION The FCTN-RLY4-***-2 module combines the popular Linx LR Series receiver with a decoder IC and four relays that are capable of switching a variety of AC or DC loads. The Relay Function Module is designed to receive a wireless signal transmitted from a compatible Linx RF module or precertified OEM transmitter. When transmitted data is received, the data is presented to the decoder. The decoder detects the logic states of the DIP switch address lines, and if they match the address settings of the encoder, the decoder’s outputs are set to replicate the state of the encoder’s data lines. Figure 3 shows the inside of the module. The four position DIP switch, S2, allows each relay to be set to latched LAT or momentary MOM operation. Figure 3 Latched / Momentary DIP Switch POWER SUPPLY CONSIDERATIONS The module should be powered from a DC source that is free of noise and high ripple. The best results are normally obtained using a battery or high quality AC wall adapter capable of providing the supply currents indicated in the Electrical Specifications section. Two supply connection options are provided black ground and red + quick-connect terminals or a barrel jack for a 5.5mm shell, 2.1mm tip plug, tip +7 to 30VDC, shell ground . Only one connection should be used at a time and proper supply polarity should be observed. SETTING THE MODULE ADDRESS OFF ON

PDF Datasheet Preview

WIRELESS MADE SIMPLE
4-POSITION RELAY FUNCTION MODULE 2 DATA GUIDE

The Relay Function Module 2 is a member of
the Linx pre-certified OEM product line. The
modules have been tested for FCC, Industry

Canada, and European CE 433MHz only
compliance and can be quickly customized
to meet a specific OEM’s labeling requirements. This greatly reduces the time
and expense of bringing an RF-based
product to market. The Relay Function Modules provide four latched or momentary
relay outputs that are capable of switching external AC or DC powered loads of up to 7 amps. The Relay Modules incorporate a Linx

LR Series receiver. Selectable addressing Figure 1 Package Dimensions
provides security and allows the creation of
256 distinct transmitter / receiver relationships to avoid unwanted interaction when
multiple systems are in use. When paired with a compatible Holtek based Linx OEM

Handheld transmitter or transmitter module, the Relay Function Module 2 serves as
a reliable wireless switching device at distances of up to 750 feet.
n FCC, Canada, and CE pre-tested n Wide operational voltage
7 to 30VDC n Dual power inputs n 4 long-life relays, switch AC or DC n Flange-mount case
n Quick-attach heavy-duty device connectors
n 256 unique addresses n Can be cosmetically customized
for OEM applications

APPLICATIONS INCLUDE
n General Remote Control n Motor Control n Garage / Gate Openers n Lighting Control n Call Systems n Home / Industrial Automation n Wire Elimination
ORDERING INFORMATION

PART #

FCTN-RLY4-315-2 Relay Function Module 2 - 315MHz

FCTN-RLY4-418-2 Relay Function Module 2 - 418MHz

FCTN-RLY4-433-2 Relay Function Module 2 - 433MHz

ELECTRICAL SPECIFICATIONS

Parameter POWER SUPPLY Operating Voltage Supply Current

RX Only RX and 1 Relay RX and 2 Relays RX and 3 Relays RX and 4 Relays RECEIVER SECTION Receive Frequency Range FCTN-RLY4-315 FCTN-RLY4-418 FCTN-RLY4-433 Center Frequency Accuracy Receiver Sensitivity RELAY CHARACTERISTICS Arrangement Switched Power

Relay Switching Voltage

Switched Device Current Operate Time Release Time Life Expectancy

Mechanical Electrical Contact Dielectric Strength at sea level for 1 minute ENVIRONMENTAL Operating Temperature Range Storage Temperature Range

Designation Min.

Typical Max.

Units Notes
-106
-112
-118

SPST
watts
4000
1x107

Operations 2
1x105 10A, 277VA
1000Vrms across contacts
1750Vrms contact-to-coil

Notes

Typical values at 12V and 25°C Max and Min values are over the full voltage and temperature range. Characterized, but not tested. For BER of 10-5 at 1,200bps.

RELAY FUNCTION MODULE FEATURES

Antenna

DC Power Connector 7 to 30VDC
“Quick-Connect” Alternate DC Input

Switched Device Connectors

Address Selector DIP Switches

Figure 2 Relay Module Features

THEORY OF OPERATION

The FCTN-RLY4-***-2 module combines the popular Linx LR Series receiver with a decoder IC and four relays that are capable of switching a variety of AC or DC loads. The Relay Function Module is designed to receive a wireless signal transmitted from a compatible Linx RF module or precertified OEM transmitter. When transmitted data is received, the data is presented to the decoder. The decoder detects the logic states of the DIP switch address lines, and if they match the address settings of the encoder, the decoder’s outputs are set to replicate the state of the encoder’s data lines. Figure 3 shows the inside of the module. The four position DIP switch, S2, allows each relay to be set to latched LAT or momentary MOM operation.

Figure 3 Latched / Momentary DIP Switch

POWER SUPPLY CONSIDERATIONS

The module should be powered from a DC source that is free of noise and high ripple. The best results are normally obtained using a battery or high quality AC wall adapter capable of providing the supply currents indicated in the Electrical Specifications section. Two supply connection options are provided black ground and red + quick-connect terminals or a barrel jack for a 5.5mm shell, 2.1mm tip plug, tip +7 to 30VDC, shell ground . Only one connection should be used at a time and proper supply polarity should be observed.

SETTING THE MODULE ADDRESS

OFF ON

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived FCTN-RLY4-418 Datasheet file may be downloaded here without warranties.

Datasheet ID: FCTN-RLY4-418 645778