IRAMX16UP60A

IRAMX16UP60A Datasheet

IRAMX16UP60A

Part	Datasheet
IRAMX16UP60A	IRAMX16UP60A (pdf)

Related Parts	Information
IRAMX16UP60A-2	IRAMX16UP60A-2

PDF Datasheet Preview
IRAMX16UP60A Integrated Power Hybrid IC for Appliance Motor Drive Applications. Series 16A, 600V International Rectifier's IRAMX16UP60A is an Integrated Power Module developed and optimized for electronic motor control in appliance applications such as washing machines and variable speed compressor drives for in-room air-conditioning systems and commercial refrigerators. Plug N Drive technology offers an extremely compact, high performance AC motor-driver in a single isolated package for a very simple design. An open emitter configuration of the low side IGBT switches offer easy current feedback and overcurrent monitor for high precision and reliable control. A built-in temperature monitor and over-current protection, along with the short-circuit rated IGBTs and integrated under-voltage lockout function, deliver high level of protection and fail-safe operation. The integration of the bootstrap diodes for the high-side driver section, and the single polarity power supply required to drive the internal circuitry, simplify the utilization of the module and deliver further cost reduction advantages. • Integrated Gate Drivers and Bootstrap Diodes. • Temperature Monitor • Temperature and Overcurrent shutdown • Fully Isolated Package. • Low VCE on Non Punch Through IGBT Technology. • Undervoltage lockout for all channels • Matched propagation delay for all channels • Low side IGBT emitter pins for current control • Schmitt-triggered input logic • Cross-conduction prevention logic • Lower di/dt gate driver for better noise immunity • Motor Power range 0.75~2kW / 85~253 Vac • Isolation 2000VRMS min Absolute Maximum Ratings Parameter Value Units VCES / VRRM V+ IGBT/Diode Blocking Voltage Positive Bus Input Voltage 600 V IO TC=25°C RMS Phase Current Note 1 IO TC=100°C RMS Phase Current Note 1 Pulsed RMS Phase Current Note 2 FPWM PWM Carrier Frequency Power dissipation per IGBT TC =25°C VISO Isolation Voltage 1min 2000 VRMS TJ IGBT & Diodes TJ Driver IC Operating Junction temperature Range Operating Junction temperature Range -40 to +150 °C -40 to +150 Mounting torque Range M3 screw Note 1 Sinusoidal Modulation at V+=400V, TJ=150°C, FPWM=16kHz, Modulation Depth=0.8, PF=0.6, See Figure Note 2 tP<100ms TC=25°C FPWM=16kHz. Limited by IBUS-ITRIP, see Table "Inverter Section Electrical Characteristics" IRAMX16UP60A Internal Electrical Schematic - IRAMX16UP60A V+ 10 VRU 12 VRV 13 VRW 14 VB1 7 U, VS1 8 VB2 4 V, VS2 5 VB3 1 W, VS3 2 HIN1 15 HIN2 16 HIN3 17 LIN1 18 LIN2 19 LIN3 20 T/ITRIP 21 VCC 22 VSS 23 R3 RT THERMISTOR

PDF Datasheet Preview

IRAMX16UP60A

Integrated Power Hybrid IC for Appliance Motor Drive Applications.

Series 16A, 600V

International Rectifier's IRAMX16UP60A is an Integrated Power Module developed and optimized for electronic motor control in appliance applications such as washing machines and variable speed compressor drives for in-room air-conditioning systems and commercial refrigerators. Plug N Drive technology offers an extremely compact, high performance AC motor-driver in a single isolated package for a very simple design. An open emitter configuration of the low side IGBT switches offer easy current feedback and overcurrent monitor for high precision and reliable control. A built-in temperature monitor and over-current protection, along with the short-circuit rated IGBTs and integrated under-voltage lockout function, deliver high level of protection and fail-safe operation. The integration of the bootstrap diodes for the high-side driver section, and the single polarity power supply required to drive the internal circuitry, simplify the utilization of the module and deliver further cost reduction advantages.
• Integrated Gate Drivers and Bootstrap Diodes.
• Temperature Monitor
• Temperature and Overcurrent shutdown
• Fully Isolated Package.
• Low VCE on Non Punch Through IGBT Technology.
• Undervoltage lockout for all channels
• Matched propagation delay for all channels
• Low side IGBT emitter pins for current control
• Schmitt-triggered input logic
• Cross-conduction prevention logic
• Lower di/dt gate driver for better noise immunity
• Motor Power range 0.75~2kW / 85~253 Vac
• Isolation 2000VRMS min

Absolute Maximum Ratings

Parameter

Value

Units

VCES / VRRM V+

IGBT/Diode Blocking Voltage Positive Bus Input Voltage
600 V

IO TC=25°C

RMS Phase Current Note 1

IO TC=100°C

RMS Phase Current Note 1

Pulsed RMS Phase Current Note 2

FPWM

PWM Carrier Frequency

Power dissipation per IGBT TC =25°C

VISO

Isolation Voltage 1min
2000

VRMS

TJ IGBT & Diodes TJ Driver IC

Operating Junction temperature Range Operating Junction temperature Range
-40 to +150 °C
-40 to +150

Mounting torque Range M3 screw

Note 1 Sinusoidal Modulation at V+=400V, TJ=150°C, FPWM=16kHz, Modulation Depth=0.8, PF=0.6, See Figure Note 2 tP<100ms TC=25°C FPWM=16kHz. Limited by IBUS-ITRIP, see Table "Inverter Section Electrical Characteristics"

IRAMX16UP60A

Internal Electrical Schematic - IRAMX16UP60A

V+ 10

VRU 12 VRV 13 VRW 14

VB1 7 U, VS1 8

VB2 4 V, VS2 5

VB3 1 W, VS3 2

HIN1 15 HIN2 16 HIN3 17 LIN1 18 LIN2 19 LIN3 20 T/ITRIP 21

VCC 22 VSS 23

R3 RT THERMISTOR

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived IRAMX16UP60A Datasheet file may be downloaded here without warranties.

Datasheet ID: IRAMX16UP60A 638316