75-4700-2660-2

75-4700-2660-2 Datasheet


58 mm x 58 mm x 75-4700-2660-2

Part Datasheet
75-4700-2660-2 75-4700-2660-2 75-4700-2660-2 (pdf)
PDF Datasheet Preview
3MTM RFID D4C Label Technical Data Sheet
58 mm x 58 mm x 75-4700-2660-2

This RFID label is provided as a 58 mm square pressure sensitive label on a silicon paper liner. The labels are wound on a single label width roll. The integrated circuit operates at MHz in compliance with ISO 18000-3 Mode 1 and ISO The integrated circuit incorporates a 1024 bit memory.

Dimensions

A Label to label pitch

B Web width

C Web edge to label

D Label width

E RFID antenna width

F Label length

G Antenna length

Label thickness over antenna without IC

Label thickness
maximum with IC

Core inside diameter

Maximum roll diameter
mm 58 mm 52 mm 58 mm 52 mm
76 mm 3” 185 mm
3M Track and Trace Solutions 3M Center, Bldg. 225-4N-14 St. Paul, MN 55144-1000 1-800-554-9107
3M is a trademarks of 3M. 2009 3M
3MTM RFID D4C Label

Electronic Specifications

Integrated circuit Operating frequency Supported standards Read/Write cycles Read rate Anti-collision Memory format Read range Data rate

NXP ICODE SLI - SL2 ICS20 MHz ISO 18000-3 Mode 1, ISO 15693-3 Unlimited number of read cycles up to 100,000 write cycles Up to 50 labels per second dependent on application Yes - Linear Algorithm 1024 bits 896 bits user programmable Dependent on reader power and reader antenna 26 kb/s per ISO 18000-3 Mode 1 Specification

Material Specifications

Face material Adhesive PH Antenna Integrated circuit connection to antenna base material Black security coating Printability

Opaque transfer paper 3M Acrylic Adhesive to pH units Copper Integrated circuit ultrasonically welded to Flip Chip Package Flip Chip Package mechanically crimped to antenna PET Polyethylene terephthalate No Thermal transfer printable Zebra Technologies Corporation TLP2844-Z

General Specifications

Operating temperature Storage temperature Storage life Reliability testing ESD voltage immunity Bending diameter
-20 C to 70 C -4 F to 158 F 15 C to 25 C 59 F to 77 F and 40% to 60% relative humidity 1 year label on liner 65 C 149 F / 95%RH for 15 weeks +/- 2 kV peak >60 mm, tension less than 10 N

Delivery and Packaging Specifications

Labels per roll Rolls in package Winding Inspection and delivered labels Bad labels marked Warranty
1000 3 Label face out 100% inspection, 1000 good labels per roll No Please contact your local 3M sales representative for warranty information
3M Track and Trace Solutions 3M Center, Bldg. 225-4N-14 St. Paul, MN 55144-1000 1-800-554-9107
3M is a trademarks of 3M. 2009 3M
More datasheets: 74F373PC | 74F373SC | FDD6N50TF | 1217 | 2521 | 0330.AB0.011 | 0330.AB0.111 | AD5821AD-WAFER | DFR0429 | 204-10USOC/S530-A5


Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived 75-4700-2660-2 Datasheet file may be downloaded here without warranties.

Datasheet ID: 75-4700-2660-2 518787