DFR0429

DFR0429 Datasheet

Gravity DC Micro Metal Gear Motor w/Driver - 50:1 SKU:DFR0429

Part	Datasheet
DFR0429	DFR0429 (pdf)

PDF Datasheet Preview
Gravity DC Micro Metal Gear Motor w/Driver - 50:1 SKU:DFR0429 INTRODUCTION An ordinary DC motor requires an H Bridge to work with a microcontroller such as an UNO. For newcomers to electronics, the process of finding the right motor driver, connecting it to the MCU and learning the relevant electronic theory can be confusing and frustrating when you just need something to work quickly. We hope that using the DC Micro Metal gear motor changes this. The new micro DC geared motor is easy to operate - using the DFRobot "Gravity" interface, you are able to control the motor using only one control signal. Easily implement forward/reverse control and speed control via PWM. This motor also combines the features of a DC motor and 360 degree servo. We have also increased the stop range and reduced standby power consumption, so the current draw is less than 1mA without signal control. The Arduino Servo library supports up to 12 motors on most Arduino boards and 48 on the Arduino Mega. More fucntion could be found on Arduino Servo page. Ideal for DIY projects! NOTE The embedded control chip will consume a small amount of the input voltage, therefore the motor voltage will be slightly reduced. The motor speed will also be slightly slower than the rated motor speed. SPECIFICATION • Operating voltage 3.5V - 8V • Reduction ratio 50:1 • No load current approx • Static current < 1mA no PWM control signal input • Interface Gravity 3-Pin • PPM signal resolution 1us • PPM signal pulse width range 500us-2500us • Clockwise pulse width range 500us-1400us 500us speed maximum • Stop pulse width range 1400us-1600us • Anticlockwise pulse width range 1600us-2500us speed maximum • PWM frequency 500 Hz. SHIPPING LIST • DC Micro Metal Gear Motor w/Driver - 50:1 x1 • Gravity 3-Pin cable x1 Powered By DFRobot 2008-2017

PDF Datasheet Preview

Gravity DC Micro Metal Gear Motor w/Driver - 50:1 SKU:DFR0429

INTRODUCTION

An ordinary DC motor requires an H Bridge to work with a microcontroller such as an UNO. For newcomers to electronics, the process of finding the right motor driver, connecting it to the MCU and learning the relevant electronic theory can be confusing and frustrating when you just need something to work quickly. We hope that using the DC Micro Metal gear motor changes this. The new micro DC geared motor is easy to operate - using the DFRobot "Gravity" interface, you are able to control the motor using only one control signal. Easily implement forward/reverse control and speed control via PWM. This motor also combines the features of a DC motor and 360 degree servo. We have also increased the stop range and reduced standby power consumption, so the current draw is less than 1mA without signal control. The Arduino Servo library supports up to 12 motors on most Arduino boards and 48 on the Arduino Mega. More fucntion could be found on Arduino Servo page. Ideal for DIY projects! NOTE The embedded control chip will consume a small amount of the input voltage, therefore the motor voltage will be slightly reduced. The motor speed will also be slightly slower than the rated motor speed.

SPECIFICATION
• Operating voltage 3.5V - 8V
• Reduction ratio 50:1
• No load current approx
• Static current < 1mA no PWM control signal input
• Interface Gravity 3-Pin
• PPM signal resolution 1us
• PPM signal pulse width range 500us-2500us
• Clockwise pulse width range 500us-1400us 500us speed maximum
• Stop pulse width range 1400us-1600us
• Anticlockwise pulse width range 1600us-2500us speed maximum
• PWM frequency 500 Hz.

SHIPPING LIST
• DC Micro Metal Gear Motor w/Driver - 50:1 x1
• Gravity 3-Pin cable x1

Powered By DFRobot 2008-2017

More datasheets: 74F373SJX | 74F373SCX | 74F373PC | 74F373SC | FDD6N50TF | 1217 | 2521 | 0330.AB0.011 | 0330.AB0.111 | AD5821AD-WAFER

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived DFR0429 Datasheet file may be downloaded here without warranties.

Datasheet ID: DFR0429 508764