2521

2521 Datasheet


PRODUCT ID 2521

Part Datasheet
2521 2521 2521 (pdf)
PDF Datasheet Preview
Adafruit FONA - uFL Version Starter Pack

PRODUCT ID 2521
• Description

Build your own cellular project and get off the grid with FONA. This pack comes with an antenna type FONA and paired with accessories. It's the Adafruit FONA uFL Starter Pack. The FONA miniGSM is an adorable cellular phone module that lets you add voice, text, SMS and data to your project in an adorable little package. This module measures only 1.75"x1.25" but packs a surprising amount of technology into its little frame. At the heart is a GSM cellular module we use the latest SIM800 the size of a
postage stamp. This module can do just about everything. This starter pack has a uFL connector. For the SMA version, click here! And for the Adafruit FONA 800 uFL Shield version click here!
o 850/900/1800/1900MHz connect onto any global GSM network with any 2G SIM in the USA, is suggested
o Make and receive voice calls using a headset OR an external 8Ω speaker + electret microphone
o Send and receive SMS messages o Send and receive GPRS data TCP/IP, etc. o Scan and receive FM radio broadcasts yeah, we don't exactly know why this was
included but it works really well o PWM/Buzzer vibrational motor control o AT command interface with "auto baud" detection

Sounds delicious, right? So we plated this fine module onto a little breakout with all the extras you need to make your next project shine:
o Onboard LiPoly battery charging circuitry so you can take your project on the go. Use any 500mAh+ LiPoly or LiIon battery and recharge over the MicroUSB when necessary. Two LEDs let you know when its charging and done
o Standard TRRS headphone jack. Use any 'Android' or headset with mic
o Breakouts for external 8Ω speaker and electret mic if you don't want to use a headphone
o Level shifting circuitry so you can run it with 2.8V to 5V logic. o Vibrational motor buzzer driver so you can have noiseless notifications o uFL connections for external antenna o Indicator LEDs for power and network connectivity o Standard SIM slides into the back

On its own, this module can't do anything. It requires a microcontroller to drive it! We suggest and use an Arduino but any microcontroller with a UART can send and receive commands over the RX/TX pins.

Microcontroller not included! We recommend an Arduino UNO to go along SIM card not included! If you are in the USA, we recommend TING

This Pack Contains:
o 1x Adafruit FONA Mini Cellular GSM Breakout uFL Version v1 o 1x Slim GSM/Cellular Antenna 3dBi uFL o 1x Lithium Ion Polymer Battery 3.7v 1200mAh o 1x Mini Metal Speaker w/ Wires 8 ohm 0.5W o 1x Wired Miniature Electret Microphone o 1x TRRS Headset Earbud Headphones w/ Microphone o 1x Vibrating Mini Motor Disc
• Technical Details

This Pack Contains o 1x Slim GSM/Cellular Antenna 3dBi uFL o 1x Mini Metal Speaker w/ Wires 8 ohm 0.5W o 1x Vibrating Mini Motor Disc o 1x Adafruit FONA Mini Cellular GSM Breakout uFL Version v1 o 1x Lithium Ion Polymer Battery 3.7v 1200mAh o 1x Wired Miniature Electret Microphone o 1x TRRS Headset Earbud Headphones w/ Microphone
• Datasheets:
o FCC TCB BT o R&TTE Statement of Opinion o FCC Part 15B Test Report o FCC Part 15C Test Report o FCC RF Test Report o FCC TCB o

Engineered in NYC Adafruit
More datasheets: S1A-13 | 74F373SJ | 74F373MSA | 74F373MSAX | 74F373SJX | 74F373SCX | 74F373PC | 74F373SC | FDD6N50TF | 1217


Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived 2521 Datasheet file may be downloaded here without warranties.

Datasheet ID: 2521 509394