AD5821A
Part | Datasheet |
---|---|
![]() |
AD5821AD-WAFER (pdf) |
PDF Datasheet Preview |
---|
Current sink 120 mA Available in 3 x 3 array WLCSP package 2-wire, I2C-compatible V serial interface 10-bit resolution Integrated current sense resistor Power supply range V to V Guaranteed monotonic over all codes Power down to uA typical Internal reference Ultralow noise preamplifier Power-down function Power-on reset Consumer Lens autofocus Image stabilization Optical zoom Shutters Iris/exposure Neutral density ND filters Lens covers Camera phones Digital still cameras Camera modules Digital video cameras/camcorders Camera-enabled devices Security cameras Web/PC cameras 120 mA, Current Sinking, 10-Bit, I2C DAC AD5821A Industrial Heater controls Fan controls Cooler Peltier controls Solenoid controls Valve controls Linear actuator controls Light controls Current loop controls The AD5821A is a single, 10-bit digital-to-analog converter DAC with output current sinking capability of 120 mA. It features an internal reference and operates from a single V to V supply. The DAC is controlled via a 2-wire, serial interface that operates at clock rates up to 400 kHz. The AD5821A incorporates a power-on reset circuit that ensures the DAC output powers up to 0 V and remains there until a valid write takes place. It has a power-down feature that reduces the current consumption of the device to 1 uA maximum. The AD5821A is designed for autofocus, image stabilization, and optical zoom applications in camera phones, digital still cameras, and camcorders. The AD5821A is also suitable for many industrial applications, such as controlling temperature, light, and movement without derating over temperatures ranging from −30°C to +85°C. The I2C 7-bit address for the AD5821A is 0xC. FUNCTIONAL BLOCK DIAGRAM XSHUTDOWN DGND SDA SCL REFERENCE POWER-ON RESET I2C SERIAL INTERFACE 10-BIT CURRENT OUTPUT DAC VDD D1 ISINK AD5821A DGND Figure RSENSE AGND 07796-001 Information furnished by Analog Devices is believed to be accurate and reliable. However, no responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other rights of third parties that may result from its use. Specifications subject to change without notice. No license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Trademarks and registered trademarks are the property of their respective owners. One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A. Tel: Fax: 2008 Analog Devices, Inc. All rights reserved. AD5821A* Product Page Quick Links Last Content Update 08/30/2016 Comparable Parts View a parametric search of comparable parts Evaluation Kits • AD5821A Evaluation Board Documentation Data Sheet • AD5821A 120 mA, Current Sinking, 10-Bit, I2C DAC Data Sheet Reference Materials Solutions Bulletins & Brochures • Digital to Analog Converters ICs Solutions Bulletin Serial Interface 11 I2C Bus Operation 11 Data Format 11 Power Supply Bypassing and Grounding 12 Applications Information 14 Outline Dimensions 15 Ordering Guide 15 AD5821A SPECIFICATIONS VDD = V to V, AGND = DGND = 0 V, load resistance RL = 25 Ω connected to VDD. All specifications TMIN to TMAX, unless otherwise noted. Table Parameter DC PERFORMANCE Resolution Relative Accuracy2 Differential Nonlinearity2, 3 Zero-Code Error2, 4 Offset Error Code 162 Gain Error2 Offset Error Drift4, 5 Gain Error Drift2, 5 B Version1 Typ Max Unit Bits LSB mA % of FSR uA/°C LSB/°C Test Conditions/Comments VDD = V to V device operates over V to V with reduced performance 117 uA/LSB Guaranteed monotonic over all codes All 0s loaded to DAC at 25°C OUTPUT CHARACTERISTICS Minimum Sink Current4 Maximum Sink Current Output Current During XSHUTDOWN5 Output Compliance5 Output Compliance5 Power-Up Time5 LOGIC INPUTS XSHUTDOWN 5 Input Current Input Low Voltage, VINL Input High Voltage, VINH Pin Capacitance LOGIC INPUTS SCL, SDA 5 Input Low Voltage, VINL Input High Voltage, VINH Input Low Voltage, VINL Input High Voltage, VINH Input Leakage Current, IIN Input Hysteresis, VHYST Digital Input Capacitance, CIN Glitch Rejection6 POWER REQUIREMENTS VDD IDD Normal Mode VDD 6 VDD + V VDD + V IDD Power-Down Mode 7 XSHUTDOWN = 0 Output voltage range over which maximum 120 mA sink current is available Output voltage range over which 90 mA sink current is available To 10% of FS, coming out of power-down mode VDD = 5 V VDD = V to V VDD = V to V VDD = V to V VDD = V to V VDD = V to V VDD = V to V VIN = 0 V to VDD Pulse width of spike suppressed IDD specification is valid for all DAC codes VINH = V, VINL = GND, VDD = V to V VINH = V, VINL = GND, VDD = 3 V 1 Temperature range for the B version is −30°C to +85°C. 2 See the Terminology section. 3 Linearity is tested using a reduced code range Code 32 to Code 4 To achieve near zero output current, use the power-down feature. 5 Guaranteed by design and characterization not production tested. XSHUTDOWN is active low. SDA and SCL pull-up resistors are tied to V. 6 Input filtering on both the SCL and the SDA inputs suppress noise spikes that are less than 50 ns. 7 XSHUTDOWN is active low. AD5821A AC SPECIFICATIONS VDD = V to V, AGND = DGND = 0 V, RL = 25 Ω connected to VDD, unless otherwise noted. Table Parameter Output Current Settling Time Slew Rate Major Code Change Glitch Impulse Digital Feedthrough3 B Version1, 2 Min Typ Max Unit us mA/us nA-sec nA-sec 1 Temperature range for the B version is −40°C to +85°C. 2 Guaranteed by design and characterization not production tested. 3 See the Terminology section. ORDERING GUIDE Model AD5821ABCBZ-REEL71 AD5821ABCBZ-REEL1 AD5821A-WAFER AD5821AD-WAFER EVAL-AD5821AEBZ1 1 Z = RoHS Compliant Part. Temperature Range −30°C to +85°C −30°C to +85°C −40°C to +85°C −40°C to +85°C Package Description 9-Ball Wafer Level Chip Scale Package WLCSP 9-Ball Wafer Level Chip Scale Package WLCSP Bare Die Wafer Bare Die Wafer on Film Evaluation Board Package Option CB-9-1 CB-9-1 Branding 1X AD5821A NOTES Purchase of licensed I2C components of Analog Devices or one of its sublicensed Associated Companies conveys a license for the purchaser under the Philips I2C Patent Rights to use these components in an I2C system, provided that the system conforms to the I2C Standard Specification as defined by Philips. 2008 Analog Devices, Inc. All rights reserved. Trademarks and registered trademarks are the property of their respective owners. D07796-0-10/08 0 |
More datasheets: 74F373MSAX | 74F373SJX | 74F373SCX | 74F373PC | 74F373SC | FDD6N50TF | 1217 | 2521 | 0330.AB0.011 | 0330.AB0.111 |
Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived AD5821AD-WAFER Datasheet file may be downloaded here without warranties.