JN5139/Z01,531

JN5139/Z01,531 Datasheet

Data Sheet JN5139-001 and JN5139-Z01

Part	Datasheet
JN5139/Z01,531	JN5139/Z01,531 (pdf)

Related Parts	Information
JN5139/001,531	JN5139/001,531
JN5139/001,518	JN5139/001,518
JN5139/Z01,515	JN5139/Z01,515
JN5139/001,515	JN5139/001,515
JN5139/Z01,518	JN5139/Z01,518

PDF Datasheet Preview
Data Sheet JN5139-001 and JN5139-Z01 IEEE802.15.4 and ZigBee Wireless Microcontrollers Overview The JN5139 is a low power, low cost wireless microcontroller suitable for IEEE802.15.4 and ZigBee applications. The device integrates a 32-bit RISC processor, with a fully compliant 2.4GHz IEEE802.15.4 transceiver, 192kB of ROM, 96kB of RAM, and a rich mixture of analogue and digital peripherals. The cost sensitive ROM/RAM architecture supports the storage of system software, including protocol stacks, routing tables and application code/data. An external flash memory may be used to store application code that will be bootloaded into internal RAM and executed at runtime. The device integrates hardware MAC and AES encryption accelerators, power saving and timed sleep modes, and mechanisms for security key and program code encryption. These features all make for a highly efficient, low power, single chip wireless microcontroller for battery-powered applications. Block Diagram 2.4GHz Radio XTAL Power Management O-QPSK Modem IEEE802.15.4 MAC Accelerator 128-bit AES Encryption Accelerator RAM 96kB ROM 192kB 32-bit RISC CPU 48-byte OTP eFuse 2-wire serial Timers UARTs 12-bit ADC, comparators 11-bit DACs, temp sensor Bootloader Flash • Single chip integrates transceiver and microcontroller for wireless sensor networks • Cost sensitive ROM/RAM architecture, meets needs for volume application • System BOM is low in component count and cost • Hardware MAC ensures low power consumption and low processor overhead • Extensive user peripherals • Robust and secure low power wireless applications • Wireless sensor networks, particularly IEEE802.15.4 and ZigBee systems • Home and commercial building automation • Remote Control • Toys and gaming peripherals • Industrial systems • Telemetry and utilities e.g. AMR Features Transceiver • 2.4GHz IEEE802.15.4 compliant • 128-bit AES security processor • MAC accelerator with packet formatting, CRCs, address check, auto-acks, timers • Integrated power management and sleep oscillator for low power • On-chip power regulation for 2.2V to 3.6V battery operation • Deep sleep current 60nA • Sleep current with active sleep timer 1.2µA • Needs minimum of external components < cost • Rx current 37mA • Tx current 38mA • Receiver sensitivity -97dBm • Transmit power +3dBm Features Microcontroller • 32-bit RISC processor sustains up to 16MIPs with low power • 192kB ROM stores system firmware that includes Bootloader, and IEEE802.15.4 MAC • 96kB RAM stores system data and bootloaded application code Appendix A Mechanical and Ordering Information A.1 56pin QFN Package Drawing A.2 PCB Decal A.3 Ordering Information A.4 Device Package Marking A.5 Tape and Reel Information A.5.1 Tape Orientation and Dimensions A.5.2 Reel Information 180mm Reel A.5.3 Reel Information 330mm Reel A.5.4 Dry Pack Requirement for Moisture Sensitive Material A.6 PCB Design and Reflow Profile Appendix B Development Support B.1 Crystal Oscillator B.1.1 Crystal Equivalent Circuit B.1.2 Crystal Load Capacitance B.1.3 Crystal ESR and Required Transconductance B.2 16MHz Oscillator B.3 Applications Information B.3.1 Typical Application Schematic B.3.2 Reference Designs Related Documents RoHS Compliance Status Information Disclaimers Version Control Contact Details JN-DS-JN5139 1v9 NXP Laboratories UK 2010 1 Introduction The JN5139-001 and JN5139-Z01 are IEEE802.15.4 wireless microcontrollers that provide a fully integrated solution for applications using the IEEE802.15.4 and ZigBee standards in the - 2.5GHz ISM frequency band They include all of the functionality required to meet the IEEE802.15.4 specification and have additional processor capability to run a wide range of applications including but not limited to Remote Control, Home and Building Automation, Toys and Gaming. The following table explains which software stack is compatible with which chip variant: ROM Variant 001 JenNet ZigBee 04 The devices include a Wireless Transceiver, RISC CPU, on-chip memory and an extensive range of peripherals. Hereafter, the JN5139-001 and JN5139-Z01 will be referred to collectively as JN5139. Wireless Microcontroller Applications that transfer data wirelessly tend to be more complex than wired ones. Wireless protocols make stringent demands on frequencies, data formats, timing of data transfers, security and other issues. Application development must consider the requirements of the wireless network in addition to the product functionality and user interfaces. To minimise this complexity, Jennic provides a series of software libraries and interfaces that control the transceiver and peripherals of the JN5139. These libraries and interfaces remove the need for the developer to understand wireless protocols and greatly simplifies the programming complexities of power modes, interrupts and hardware functionality. In view of the above, the register details of the JN5139 are not provided in the datasheet. Wireless Transceiver Appendix A Mechanical and Ordering Information A.1 56pin QFN Package Drawing Controlling Dimension mm millimetres Symbol Min. Nom. Max. A ------ ------ A2 ------ Ref. ------ 12° R ------ ------ Tolerances of Form and Position JN-DS-JN5139 1v9 NXP Laboratories UK 2010 A.2 PCB Decal The following PCB decal is recommended all dimensions are in millimetres mm . For further detail please consult the Module Development Reference Manual JN-RM-2006, available to download from the Jennic Support web site NXP Laboratories UK 2010 JN-DS-JN5139 1v9 A.3 Ordering Information The standard qualification for the JN5139 is Industrial Specification -40ºC to +85ºC, packaged in a 56-pin QFN Quad Flat No-leads package. Ordering Code Format JN5139/XXX XXX: ROM Variant 001 IEEE802.15.4 Z01 ZigBee Ordering Codes: Part Number JN5139-001 JN5139-Z01 Ordering Code JN5139/001 JN5139/Z01 Description JN5139 IEEE802.15.4 microcontroller JN5139 ZigBee microcontroller The chip is available in three different reel quantities • 500 on 180mm reel • 1000 on 180mm reel • 2500 on 330mm reel JN-DS-JN5139 1v9 NXP Laboratories UK 2010 A.4 Device Package Marking The diagram below shows the package markings for JN5139 devices. The package on the left along with the legend information below it, shows the general format of package marking. The package on the right shows the specific markings for a JN5139-001 device, that came from assembly build number and was manufactured week 4 of Jennic JNXXXX-SSS YYWW Jennic JN5139-001 0704 Legend JN XXXX SSS YY WW Jennic 4 digit part number, for example 5139 3 digit software ROM identifier 7 digit assembly build number 2 digit year number 2 digit week number Where this Data Sheet is denoted as “Advanced” or “Preliminary”, devices will be either Engineering or Prototype Samples. Devices of this status have an R suffix after the software ROM identifier, for example JN5139-001R. NXP Laboratories UK 2010 JN-DS-JN5139 1v9 A.5 Tape and Reel Information A.5.1 Tape Orientation and Dimensions The general orientation of the 56QFN package in the tape is as shown in Figure Figure 45 Tape and Reel Orientation Figure 46 shows the detailed dimensions of the tape used for 8x8mm 56QFN devices. Reference Ao Bo Ko P T W Dimensions mm Figure 46 Tape Dimensions JN-DS-JN5139 1v9 NXP Laboratories UK 2010 A.5.2 Reel Information 180mm Reel Surface Resistivity Material Between 10e9 10e11 Ohms Square High Impact Polystyrene, environmentally friendly, recyclable All dimensions and tolerances are fully compliant with EIA-481-B and are specified in millimetres. 6 window design with one window on each side blanked to allow adequate labelling space. Tape Width A B min 1.5min W min W max Figure 47 Reel Dimensions NXP Laboratories UK 2010 JN-DS-JN5139 1v9 A.5.3 Reel Information 330mm Reel Surface Resistivity Material Between 10e9 10e11 Ohms Square High Impact Polystyrene with Antistatic Additive All dimensions and tolerances are fully compliant with EIA-481-B and are specified in millimetres. 3 window design to allow adequate labelling space. Tape Width NXP Laboratories UK 2010 JN-DS-JN5139 1v9 Contact Details NXP Laboratories UK Ltd Formerly Jennic Ltd Furnival Street Sheffield S1 4QT United Kingdom Tel +44 0 114 281 2655 Fax +44 0 114 281 2951 E-mail For the contact details of your local Jennic office or distributor, refer to the Jennic web site: JN-DS-JN5139 1v9 NXP Laboratories UK 2010

PDF Datasheet Preview

Data Sheet JN5139-001 and JN5139-Z01

IEEE802.15.4 and ZigBee Wireless Microcontrollers

Overview

The JN5139 is a low power, low cost wireless microcontroller suitable for IEEE802.15.4 and ZigBee applications. The device integrates a 32-bit RISC processor, with a fully compliant 2.4GHz IEEE802.15.4 transceiver, 192kB of ROM, 96kB of RAM, and a rich mixture of analogue and digital peripherals.

The cost sensitive ROM/RAM architecture supports the storage of system software, including protocol stacks, routing tables and application code/data. An external flash memory may be used to store application code that will be bootloaded into internal RAM and executed at runtime.

The device integrates hardware MAC and AES encryption accelerators, power saving and timed sleep modes, and mechanisms for security key and program code encryption. These features all make for a highly efficient, low power, single chip wireless microcontroller for battery-powered applications.

Block Diagram
2.4GHz Radio

XTAL

Power Management

O-QPSK Modem

IEEE802.15.4 MAC

Accelerator
128-bit AES Encryption Accelerator

RAM 96kB

ROM 192kB
32-bit RISC CPU
48-byte OTP eFuse
2-wire serial

Timers

UARTs 12-bit ADC, comparators 11-bit DACs, temp sensor

Bootloader Flash
• Single chip integrates transceiver and microcontroller for wireless sensor networks
• Cost sensitive ROM/RAM architecture, meets needs for volume application
• System BOM is low in component count and cost
• Hardware MAC ensures low power consumption and low processor overhead
• Extensive user peripherals
• Robust and secure low power wireless applications
• Wireless sensor networks, particularly IEEE802.15.4 and ZigBee systems
• Home and commercial building automation
• Remote Control
• Toys and gaming peripherals
• Industrial systems
• Telemetry and utilities e.g. AMR

Features Transceiver
• 2.4GHz IEEE802.15.4 compliant
• 128-bit AES security processor
• MAC accelerator with packet
formatting, CRCs, address check, auto-acks, timers
• Integrated power management and sleep oscillator for low power
• On-chip power regulation for 2.2V to 3.6V battery operation
• Deep sleep current 60nA
• Sleep current with active sleep timer 1.2µA
• Needs minimum of external components < cost
• Rx current 37mA
• Tx current 38mA
• Receiver sensitivity -97dBm
• Transmit power +3dBm

Features Microcontroller
• 32-bit RISC processor sustains up to 16MIPs with low power
• 192kB ROM stores system firmware that includes Bootloader, and IEEE802.15.4 MAC
• 96kB RAM stores system data and bootloaded application code
Appendix A Mechanical and Ordering Information

A.1 56pin QFN Package Drawing

A.2 PCB Decal
A.3 Ordering Information

A.4 Device Package Marking

A.5 Tape and Reel Information

A.5.1

Tape Orientation and Dimensions

A.5.2 Reel Information 180mm Reel

A.5.3 Reel Information 330mm Reel

A.5.4 Dry Pack Requirement for Moisture Sensitive Material

A.6 PCB Design and Reflow Profile

Appendix B Development Support

B.1 Crystal Oscillator

B.1.1

Crystal Equivalent Circuit

B.1.2

Crystal Load Capacitance

B.1.3

Crystal ESR and Required Transconductance

B.2 16MHz Oscillator

B.3 Applications Information

B.3.1

Typical Application Schematic

B.3.2 Reference Designs

Related Documents

RoHS Compliance

Status Information

Disclaimers

Version Control

Contact Details

JN-DS-JN5139 1v9

NXP Laboratories UK 2010
1 Introduction

The JN5139-001 and JN5139-Z01 are IEEE802.15.4 wireless microcontrollers that provide a fully integrated solution for applications using the IEEE802.15.4 and ZigBee standards in the - 2.5GHz ISM frequency band They include all of the functionality required to meet the IEEE802.15.4 specification and have additional processor capability to run a wide range of applications including but not limited to Remote Control, Home and Building Automation, Toys and Gaming. The following table explains which software stack is compatible with which chip variant:

ROM Variant 001

JenNet

ZigBee 04

The devices include a Wireless Transceiver, RISC CPU, on-chip memory and an extensive range of peripherals.

Hereafter, the JN5139-001 and JN5139-Z01 will be referred to collectively as JN5139.

Wireless Microcontroller

Applications that transfer data wirelessly tend to be more complex than wired ones. Wireless protocols make stringent demands on frequencies, data formats, timing of data transfers, security and other issues. Application development must consider the requirements of the wireless network in addition to the product functionality and user interfaces. To minimise this complexity, Jennic provides a series of software libraries and interfaces that control the transceiver and peripherals of the JN5139. These libraries and interfaces remove the need for the developer to understand wireless protocols and greatly simplifies the programming complexities of power modes, interrupts and hardware functionality.

In view of the above, the register details of the JN5139 are not provided in the datasheet.

Wireless Transceiver
Appendix A Mechanical and Ordering Information

A.1 56pin QFN Package Drawing

Controlling Dimension mm
millimetres Symbol

Min. Nom. Max.

A ------ ------

A2 ------

Ref.
------ 12°

R ------ ------

Tolerances of Form and Position

JN-DS-JN5139 1v9

NXP Laboratories UK 2010

A.2 PCB Decal

The following PCB decal is recommended all dimensions are in millimetres mm .

For further detail please consult the Module Development Reference Manual JN-RM-2006, available to download from the Jennic Support web site

NXP Laboratories UK 2010

JN-DS-JN5139 1v9
A.3 Ordering Information

The standard qualification for the JN5139 is Industrial Specification -40ºC to +85ºC, packaged in a 56-pin QFN Quad Flat No-leads package.
Ordering Code Format JN5139/XXX

XXX:

ROM Variant 001 IEEE802.15.4 Z01 ZigBee
Ordering Codes:

Part Number JN5139-001 JN5139-Z01
Ordering Code JN5139/001 JN5139/Z01

Description JN5139 IEEE802.15.4 microcontroller JN5139 ZigBee microcontroller

The chip is available in three different reel quantities
• 500 on 180mm reel
• 1000 on 180mm reel
• 2500 on 330mm reel

JN-DS-JN5139 1v9

NXP Laboratories UK 2010

A.4 Device Package Marking

The diagram below shows the package markings for JN5139 devices. The package on the left along with the legend information below it, shows the general format of package marking. The package on the right shows the specific markings for a JN5139-001 device, that came from assembly build number and was manufactured week 4 of

Jennic

JNXXXX-SSS YYWW

Jennic

JN5139-001 0704

Legend JN XXXX SSS YY WW

Jennic 4 digit part number, for example 5139 3 digit software ROM identifier 7 digit assembly build number 2 digit year number 2 digit week number

Where this Data Sheet is denoted as “Advanced” or “Preliminary”, devices will be either Engineering or Prototype Samples. Devices of this status have an R suffix after the software ROM identifier, for example JN5139-001R.

NXP Laboratories UK 2010

JN-DS-JN5139 1v9

A.5 Tape and Reel Information

A.5.1 Tape Orientation and Dimensions

The general orientation of the 56QFN package in the tape is as shown in Figure

Figure 45 Tape and Reel Orientation Figure 46 shows the detailed dimensions of the tape used for 8x8mm 56QFN devices.

Reference Ao Bo Ko P T W

Dimensions mm

Figure 46 Tape Dimensions

JN-DS-JN5139 1v9

NXP Laboratories UK 2010

A.5.2 Reel Information 180mm Reel

Surface Resistivity Material

Between 10e9 10e11 Ohms Square High Impact Polystyrene, environmentally friendly, recyclable

All dimensions and tolerances are fully compliant with EIA-481-B and are specified in millimetres. 6 window design with one window on each side blanked to allow adequate labelling space.

Tape Width A

B min 1.5min

W min

W max

Figure 47 Reel Dimensions

NXP Laboratories UK 2010

JN-DS-JN5139 1v9

A.5.3 Reel Information 330mm Reel

Surface Resistivity Material

Between 10e9 10e11 Ohms Square High Impact Polystyrene with Antistatic Additive

All dimensions and tolerances are fully compliant with EIA-481-B and are specified in millimetres. 3 window design to allow adequate labelling space.

Tape Width
NXP Laboratories UK 2010

JN-DS-JN5139 1v9

Contact Details

NXP Laboratories UK Ltd Formerly Jennic Ltd Furnival Street Sheffield S1 4QT United Kingdom

Tel +44 0 114 281 2655 Fax +44 0 114 281 2951

E-mail For the contact details of your local Jennic office or distributor, refer to the Jennic web site:

JN-DS-JN5139 1v9

NXP Laboratories UK 2010

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived JN5139/Z01,531 Datasheet file may be downloaded here without warranties.

Datasheet ID: JN5139/Z01,531 644579