CA3106E20-17PB15
CA3106E20-17PB15 Datasheet
Datasheet for part number CA3106E20-17PB15
| Part | Datasheet |
|---|---|
CA3106E20-17PB15 |
CA3106E20-17PB15 (pdf) |
| PDF Datasheet Preview |
|---|
| Datasheet for part number CA3106E20-17PB15 Our Catalog Part Number CA3106E20-17P-B-15 Brand Cannon Product Category Circular Product Line CA Bayonet Series CA BAYONET Product Datasheet Bayonet Shell Style Endbell Style Gender Shell Size Contact Arrangement Number of contacts Contact Type Contact Plating Shielding Contact Rating at +20 °C 68 °F Size 15/15S/16/16S Contact Rating at +20 °C 68 °F Size 25/12 Contact Resistance Size 15/15S/16/16S Contact Resistance Size 25/12 Operating Voltage Insulator Resistance Test Voltage Air and Creepage Paths Min Ambient Temperature Safety Provisions Salt Spray Resistance Mating Cycles Sep. Force per Contact Size 15/15S/16/16S Sep. Force per Contact Size 25/12 Gage Coupling Torque Contact Retention Size 15/15S/16/16S Contact Retention Size 25/12 Shell Material Shell Plating Insulator and Gromet Material Contact Material Harnessing Info Contact Cross-Section Harnessing Info Insulator Diameter Specifications and dimensions subject to change. Connector with bayonet coupling Plug, straight Shielded connector with endbell for shielded braids and heat shrinkable boots Pin 20-17 1 contact size 16, 5 contacts size 12 AWG Crimp Hard silver yes 6 mΩ 3 mΩ In case of voltages greater than 50V the connector must be used in accordance with DIN VDE part 410, IEC Acc. To VG95319, part 2, test no. and VG95210, part 32, test conditions B, standard insulator material > 1000 MΩ 1600 Vrms 1,1 mm Standard insulator material -55°/+125°C -67/257°F IP67 acc. to DIN 40 050 1 bar pressure after 12 hrs 500 hours salt spray resistant 500 min 1,0 N 1,5 N For infos on Gage please see catalog VG95234, part 1 Closing 9 Nm max / Opening 0,7 Nm min 55 N Aluminium alloy Olive drab chromate over cadmium plating CR-Elastomere Copper alloy See assembly instruction See assembly instruction Datasheet for part number CA3106E20-17PB15 Our Catalog Part Number CA3106E20-17P-B-15 Brand Cannon Product Category Circular Product Line CA Bayonet Series CA BAYONET Product Datasheet Wire Stripping Size 15/15S/16/16S Wire Stripping Size 25/12 General Info 6,2 mm 6,2 mm All tests in accordance with VG95319 and/or if applicable with VG95210 Specifications and dimensions subject to change. |
Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived CA3106E20-17PB15 Datasheet file may be downloaded here without warranties.