MAX9540EVKIT+

MAX9540EVKIT+ Datasheet


MAX9539/40 Evaluation Kit

Part Datasheet
MAX9540EVKIT+ MAX9540EVKIT+ MAX9540EVKIT+ (pdf)
PDF Datasheet Preview
MAX9539/40 Evaluation Kit

Evaluates MAX9539/MAX9540

The MAX9539/40 evaluation kit EV kit is a fully assembled and tested surface-mount circuit board that contains one MAX9539 and one MAX9540 multisignal sync system. The MAX9539 is a video graphic sync adder and the MAX9540 is a video graphic sync extractor. The MAX9539/MAX9540 work together as a chipset to provide a 3-wire RGB interface for 5-wire RGBHV video.

The MAX9539/40 EV kit can be separated into two individual PC boards, MAX9539 EV kit and MAX9540 EV kit. Each EV kit operates from a dual ±5V DC power supply.
o Breakable into Two EV Kits o MAX9539 Sync 5-Wire RGBHV
to 3-Wire RGB o MAX9540 Sync 3-Wire RGB
to 5-Wire RGBHV o Dual ±5V DC Power-Supply Operation o DC-Coupled Inputs/Outputs o Standard Input/Output Terminations o Surface-Mount Components o Fully Assembled and Tested

Component Suppliers

SUPPLIER

PHONE

WEBSITE
631-622-4700

Samtec
812-944-6733
847-803-6100

Note Indicate that you are using the MAX9539/MAX9540 when contacting these component suppliers.

DESIGNATION

J1, J2
0.001µF ±10%, 25V X5R ceramic 4 capacitors 0402

TDK C1005X5R1E102K
0.01µF 10%, 10V X5R ceramic 4 capacitors 0402

TDK C1005X5R1A103K
0.1µF ±10%, 10V X5R ceramic 4 capacitors 0402

TDK C1005X5R1A104K
10µF ±20%, 10V X5R ceramic 4 capacitors 0805

TDK C2012X5R1A106M
1000pF ±20%, 50V NP0
porcelain and ceramic capacitors A-case

ATC ATC700A102MT50XC
2 x 6-pin headers 5 3-pin headers
Ordering Information

PART

TEMP RANGE

IC PACKAGE
28 TSSOP MAX9539/40EVKIT+ 0°C to +70°C*
28 TSSOP MAX9540
+Denotes a lead-free and RoHS-compliant evaluation kit.
*This limited temperature range is for the EV kit PC board only. The MAX9539 and MAX9540 IC temperature range is -40°C to +85°C.

Component List

DESIGNATION QTY

U1 U2 VGA_IN
7 2-pin headers 12 ±1% resistors 0603 1 MAX9539EUI+ 28-pin TSSOP 1 MAX9540EUI+ 28-pin TSSOP 1 HD sub-D 15-pin male connector

VGA_OUT

HD sub-D 15-pin female connector

COMP_SYNC, IN_BLU, IN_GRN, IN_RED, OUT_BLU,

OUT_GRN, OUT_RED

BNC PCB mount connectors 7 Recommended BNC cables

RG-59A/U or RG-59B/U
24 Shunts
1 MAX9539/40 EV kit PCB

Crossover ribbon cable IDC
cable, single-row, 6 sockets, double end 20in

Samtec IDSS-06-D-20

Maxim Integrated Products 1
For pricing, delivery, and ordering information, please contact Maxim/Dallas Direct! at 1-888-629-4642, or visit Maxim’s website at

Evaluates MAX9539/MAX9540

MAX9539/40 Evaluation Kit

Quick Start

Recommended Equipment
• Two 5V, 500mA DC power supplies VCC and VEE
• Desktop PC or notebook computer with a VGA output
• Computer Monitor with a VGA input
• VGA male-to-female sub-D extension cable

The MAX9539/40 EV kit is fully assembled and tested. Follow these steps to verify board operation. Do not turn on the power supply until all connections are completed.
1 Verify that a shunt is installed in each of the jumper positions in the table below:

JUMPER SHUNT POSITION

EV KIT FUNCTION

Pins 1-2

Positive sync polarity

Installed

MAX9539 EV kit outputs are connected to MAX9540 EV kit inputs on the PCB

HEADER SHUNT POSITION

EV KIT FUNCTION

J1, J2

Pins 1-2, pins 3-4, pins 5-6, pins 7-8, pins 9-10, pins 11-12

MAX9539 EV kit outputs are connected to MAX9540 EV kit inputs on the PCB
2 Connect the output of the video graphic controller on the desktop PC to the VGA_IN connector on the MAX9539/40 EV kit with the VGA extension cable.
3 Connect the VGA_OUT connector on the MAX9539/40 EV kit to the VGA input of the monitor.
4 Set both power supplies to 5V. Turn off both power supplies.
5 Connect the negative terminal of the first power supply to the GND pads on the EV kit and the positive terminal to the +5V pads on the EV kit.
6 Connect the negative terminal of the second power supply to the -5V pads on the EV kit and the positive terminal to the GND pads on the EV kit.
7 Turn on the desktop PC and computer monitor.
8 Turn on both power supplies.

Detailed Description

The MAX9539/40 EV kit is a fully assembled and tested surface-mount circuit board that contains one MAX9539 and one MAX9540 in 28-pin TSSOP packages. The MAX9539 is a video graphic sync adder and the MAX9540 is a video graphic sync extractor.

The MAX9539/40 EV kit consists of two individual EV kits, the MAX9539 EV kit and the MAX9540 EV kit. The two EV kits are configured on a single PCB that is breakable along the center cutout slots. After separation, the two EV kits can be reconnected using cables up to 20 inches long. Connect the RGB signals between the two EV kits using equal length RG-59A/U or the RG-59B/U BNC cables. Connect header J1 odd pins from the MAX9539 EV kit to J2 even pins on the MAX9540 EV kit using a Samtec IDSS-06-D-20 ribbon cable. See Table 6 for jumper locations and signal names.

The MAX9539 EV kit accepts RGBHV signals from a 5-wire interface, adds the horizontal and vertical syncs to the RGB signals, and provides the RGB outputs with sync to a 3-wire interface. The MAX9539 EV kit operates from a dual ±5V DC power supply. All the input and output signals on the MAX9539 EV kit are DC-coupled. The MAX9539 video input terminals have termination resistors to ground, and the output terminals have back termination source resistors.

The MAX9540 EV kit accepts RGB signals with sync from a 3-wire interface, extracts the horizontal and vertical syncs from the RGB signals, and provides the RGBHV outputs to a 5-wire interface. The MAX9540 EV kit operates from a dual ±5V DC power supply. All the input and output signals on the MAX9540 EV kit are DC-coupled. The MAX9540 video input terminals have termination resistors to ground, and the output terminals have back termination source resistors.

The MAX9539/40 EV kit can operate as a single unit in applications where both the graphic sync adder and extractor can be placed on the same PCB. When the MAX9539/40 EV kit is operated as a single unit, the outputs of the MAX9539 must be connected to the inputs of the MAX9540 using jumpers and headers J1 and J2. See Table 6 for configuration.

MAX9539/40 Evaluation Kit

Evaluates MAX9539/MAX9540

Jumper Selection

MAX9539 Horizontal Sync Polarity SP_H The MAX9539/40 EV kit provides an option to select the horizontal sync polarity for the MAX9539 IC. Jumper JU1 selects the horizontal sync polarity SP_H of the MAX9539 IC. See Table 1 for shunt positions.

Table JU1 Jumper Selection SP_H

SHUNT POSITION

MAX9539 SP_H PIN CONNECTED TO

MAX9539 HORIZONTAL SYNC

POLARITY
1-2 default
More datasheets: MOC8204S | MOC8204SD | MOC82043SD | MOC8204W | MOC82043S | MOC8204 | MOC8204300W | MOC8204300 | IXRH40N120 | APTGF300SK120D3G


Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived MAX9540EVKIT+ Datasheet file may be downloaded here without warranties.

Datasheet ID: MAX9540EVKIT+ 647428