P0642SA
P0642SA Datasheet
P0642S_L
| Part | Datasheet |
|---|---|
P0642SA |
P0642SA (pdf) |
| Related Parts | Information |
|---|---|
|
P0902SA |
P0902SA |
|
P0722SA |
P0722SA |
|
P1102SA |
P1102SA |
|
P2302SA |
P2302SA |
| PDF Datasheet Preview |
|---|
| %URDGEDQG 'HYLFH The DO-214AA SIDACtor Broadband Optimized protection devices are intended for applications sensitive to load values. Typically, high speed connections require a lower capacitance. CO values are 40% lower than standard devices. SIDACtor devices enable equipment to comply with various regulatory requirements including GR 1089, ITU K.20, K.21 and K.45, IEC 60950, UL 60950, and TIA-968-A formerly known as FCC Part Electrical Parameters Part Number * VDRM Volts VS Volts VT Volts IDRM uAmps IS mAmps IT Amps IH mAmps P0642S_L P0722S_L P0902S_L P1102S_L P1302S_L P1502S_L P1802S_L P2302S_L P2602S_L P3002S_L P3502S_L P4202S_L P4802S_L P6002S_L * “L” in part number indicates RoHS compliance. For non-RoHS compliant device, delete “L” from part number. For surge ratings, see table below. • VDRM is measured at IDRM. • VS is measured at 100 V/us. • Special voltage VS and VDRM and holding current IH requirements are available upon request. Surge Ratings in Amps Series 0.2x310 * 2x10 * 8x20 * 0.5x700 ** 2x10 ** 1.2x50 ** Amps * Current waveform in us ** Voltage waveform in us 10x160 * 10x160 ** Amps 90 150 IPP 10x560 * 10x560 ** Amps 50 100 5x320 * 9x720 ** Amps 75 100 ITSM 10x360 * 10x1000 * 5x310 * 50 / 60 Hz di/dt |
| More datasheets: TIS97 | TIS97_D26Z | TIS97_J35Z | TIS97_D74Z | 1731120054 | SGL40N150DTU | 387000918 | MIKROE-777 | SGB20N60ATMA1 | IPP05CN10L G |
Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived P0642SA Datasheet file may be downloaded here without warranties.