LTL2R3KRD-EM

LTL2R3KRD-EM Datasheet

Part No. LTL2R3KRD-EM

Part	Datasheet
LTL2R3KRD-EM	LTL2R3KRD-EM (pdf)

PDF Datasheet Preview
LITE-ON TECHNOLOGY CORPORATION Property of Lite-On Only * Lead Pb free product RoHS compliant. * High luminous intensity output. * Low power consumption. * High efficiency. * Versatile mounting on P.C. board or panel. * I.C. Compatible/low current requirements. * This is full bins product. Package Dimensions Part No. LTL2R3KRD-EM Lens Red Diffused Source Color AlInGaP Red Notes All dimensions are in millimeters inches . Tolerance is ±0.25mm unless otherwise noted. Protruded resin under flange is 1.0mm max. Lead spacing is measured where the leads emerge from the package. Specifications are subject to change without notice. Part No. LTL2R3KRD-EM BNS-OD-C131/A4 Page 1 of 10 LITE-ON TECHNOLOGY CORPORATION Property of Lite-On Only Absolute Maximum Ratings at TA=25 Maximum Rating 15 10 5 -40 to + 80 -40 to + 100 260 for 5 Seconds Unit mW mA/ V Part No. LTL2R3KRD-EM BNS-OD-C131/A4 Page 2 of 10 LITE-ON TECHNOLOGY CORPORATION Property of Lite-On Only Electrical / Optical Characteristics at TA=25 Parameter Luminous Intensity Viewing Angle Peak Emission Wavelength Dominant Wavelength Symbol IV λP λd Min. Typ. Max. Unit Test Condition IF = 2mA Note 1 deg Note 2 Fig.5 Measurement Fig.1 nm Note 4 Spectral Line Half-Width Forward Voltage V IF = 2mA 100 µA VR = 5V NOTE Luminous intensity is measured with a light sensor and filter combination that approximates the CIE eye-response curve. is the off-axis angle at which the luminous intensity is half the axial luminous intensity. Iv classification code is marked on each packing bag. The dominant wavelength, λd is derived from the CIE chromaticity diagram and represents the single wavelength which defines the color of the device. The Iv guarantee should be added Part No. LTL2R3KRD-EM BNS-OD-C131/A4 Page 3 of 10

PDF Datasheet Preview

LITE-ON TECHNOLOGY CORPORATION

Property of Lite-On Only
* Lead Pb free product RoHS compliant. * High luminous intensity output. * Low power consumption. * High efficiency. * Versatile mounting on P.C. board or panel. * I.C. Compatible/low current requirements. * This is full bins product.

Package Dimensions

Part No. LTL2R3KRD-EM

Lens Red Diffused

Source Color AlInGaP Red

Notes All dimensions are in millimeters inches . Tolerance is ±0.25mm unless otherwise noted. Protruded resin under flange is 1.0mm max. Lead spacing is measured where the leads emerge from the package. Specifications are subject to change without notice.

Part No. LTL2R3KRD-EM BNS-OD-C131/A4

Page 1 of 10

LITE-ON TECHNOLOGY CORPORATION

Property of Lite-On Only

Absolute Maximum Ratings at TA=25

Maximum Rating 15 10 5 -40 to + 80 -40 to + 100
260 for 5 Seconds

Unit mW mA/ V

Part No. LTL2R3KRD-EM BNS-OD-C131/A4

Page 2 of 10

LITE-ON TECHNOLOGY CORPORATION

Property of Lite-On Only

Electrical / Optical Characteristics at TA=25

Parameter Luminous Intensity Viewing Angle Peak Emission Wavelength Dominant Wavelength

Symbol IV
λP λd

Min. Typ. Max. Unit

Test Condition

IF = 2mA

Note 1
deg Note 2 Fig.5

Measurement

Fig.1
nm Note 4

Spectral Line Half-Width

Forward Voltage

V IF = 2mA
100 µA VR = 5V

NOTE Luminous intensity is measured with a light sensor and filter combination that approximates the CIE eye-response curve.
is the off-axis angle at which the luminous intensity is half the axial luminous intensity. Iv classification code is marked on each packing bag. The dominant wavelength, λd is derived from the CIE chromaticity diagram and represents
the single wavelength which defines the color of the device. The Iv guarantee should be added

Part No. LTL2R3KRD-EM BNS-OD-C131/A4

Page 3 of 10

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived LTL2R3KRD-EM Datasheet file may be downloaded here without warranties.

Datasheet ID: LTL2R3KRD-EM 646036