ICS671M-01

ICS671M-01 Datasheet

ICS671-01

Part	Datasheet
ICS671M-01	ICS671M-01 (pdf)

Related Parts	Information
ICS671M-01T	ICS671M-01T

PDF Datasheet Preview
ZERO DELAY LOW SKEW BUFFER AND MULTIPLIER DATASHEET ICS671-01 The ICS671-01 is a low phase noise, high speed PLL based, 8 output, low skew zero delay buffer and multiplier. Based on IDT’s proprietary low jitter Phase Locked Loop PLL techniques, the device provides eight low skew outputs at speeds up to 160 MHz at 3.3V. The part includes a bank of six outputs running at either x2 or x4 mode, one output running at either x2, x4, or x4 mode, and one additional output running at either x1, x2, or x4 mode. For normal operation as a zero delay buffer, any output clock is tied to the FBIN pin. IDT manufactures the largest variety of clock generators and buffers and is the largest clock supplier in the world. • Packaged in 16 pin SOIC • Available in Pb lead free package • Clock outputs from 5 to 160 MHz • Zero input-output delay • Integrated x2 or x4 selections, and x5 for CLK7 • Eight low-skew <250 ps outputs • Full CMOS outputs with 25 mA output drive capability at TTL levels • Tri-state mode for board-level testing • Advanced, low power, sub-micron CMOS process • Operating voltage of 3.3V or 5V NOTE EOL for non-green parts to occur on 5/13/10 per PDN U-09-01 Block Diagram VDD 2 CLKIN FBIN x2, x4, or x5 PLL S1, S0 Control Logic 2 GND CLK1 CLK2 CLK3 CLK4 CLK5 CLK6 CLK7 CLK8 IDT / ICS ZERO DELAY LOW SKEW BUFFER AND MULTIPLIER ICS671-01 ZERO DELAY LOW SKEW BUFFER AND MULTIPLIER ZDB AND MULTIPLIER Pin Assignment C L K IN CLK1 CLK2 CLK3 CLK4 F B IN CLK8 CLK7 CLK6 CLK5 16 pin narrow 150 m il SO IC Output Clock Mode Select Table CLK1:6 Tri-state note 1 x2 note 2 x2 x4 CLK7 Tri-state note 1 x5 note 2 x2 x4 CLK8 Tri-state note 1 x1 x2 x4 Input Range - Ordering Information Part / Order Number 671M-01* 671M-01T* 671M-01LF 671M-01LFT Marking ICS671M-01 ICS671M-01 ICS671M-01LF ICS671M-01LF Shipping Packaging Tubes Tape and Reel Tubes Tape and Reel Package 16-pin SOIC 16-pin SOIC 16-pin SOIC 16-pin SOIC Temperature 0 to +70° C 0 to +70° C 0 to +70° C 0 to +70° C *NOTE EOL for non-green parts to occur on 5/13/10 per PDN U-09-01 Parts that are ordered with a "LF" suffix to the part number are the Pb-Free configuration and are RoHS compliant. While the information presented herein has been checked for both accuracy and reliability, Integrated Device Technology IDT assumes no responsibility for either its use or for the infringement of any patents or other rights of third parties, which would result from its use. No other circuits, patents, or licenses are implied. This product is intended for use in normal commercial applications. Any other applications such as those requiring extended temperature range, high reliability, or other extraordinary environmental requirements are not recommended without additional processing by IDT. IDT reserves the right to change any circuitry or specifications without notice. IDT does not authorize or warrant any IDT product for use in life support devices or critical medical instruments. IDT / ICS ZERO DELAY LOW SKEW BUFFER AND MULTIPLIER ICS671-01 ZERO DELAY LOW SKEW BUFFER AND MULTIPLIER ZDB AND MULTIPLIER Innovate with IDT and accelerate your future networks. Contact: For Sales 800-345-7015 408-284-8200 Fax 408-284-2775 For Tech Support Corporate Headquarters Integrated Device Technology, Inc. 2006 Integrated Device Technology, Inc. All rights reserved. Product specifications subject to change without notice. IDT and the IDT logo are trademarks of Integrated Device Technology, Inc. Accelerated Thinking is a service mark of Integrated Device Technology, Inc. All other brands, product names and marks are or may be trademarks or registered trademarks used to identify products or services of their respective owners. Printed in USA

PDF Datasheet Preview

ZERO DELAY LOW SKEW BUFFER AND MULTIPLIER

DATASHEET

ICS671-01

The ICS671-01 is a low phase noise, high speed PLL based, 8 output, low skew zero delay buffer and multiplier. Based on IDT’s proprietary low jitter Phase Locked Loop PLL techniques, the device provides eight low skew outputs at speeds up to 160 MHz at 3.3V. The part includes a bank of six outputs running at either x2 or x4 mode, one output running at either x2, x4, or x4 mode, and one additional output running at either x1, x2, or x4 mode. For normal operation as a zero delay buffer, any output clock is tied to the FBIN pin.

IDT manufactures the largest variety of clock generators and buffers and is the largest clock supplier in the world.
• Packaged in 16 pin SOIC
• Available in Pb lead free package
• Clock outputs from 5 to 160 MHz
• Zero input-output delay
• Integrated x2 or x4 selections, and x5 for CLK7
• Eight low-skew <250 ps outputs
• Full CMOS outputs with 25 mA output drive capability at

TTL levels
• Tri-state mode for board-level testing
• Advanced, low power, sub-micron CMOS process
• Operating voltage of 3.3V or 5V

NOTE EOL for non-green parts to occur on 5/13/10 per PDN U-09-01

Block Diagram

VDD 2

CLKIN FBIN
x2, x4, or x5 PLL

S1, S0

Control

Logic
2 GND

CLK1 CLK2 CLK3 CLK4 CLK5 CLK6 CLK7 CLK8

IDT / ICS ZERO DELAY LOW SKEW BUFFER AND MULTIPLIER

ICS671-01 ZERO DELAY LOW SKEW BUFFER AND MULTIPLIER

ZDB AND MULTIPLIER

Pin Assignment

C L K IN

CLK1

CLK2

CLK3

CLK4

F B IN

CLK8

CLK7

CLK6

CLK5
16 pin narrow 150 m il SO IC

Output Clock Mode Select Table

CLK1:6 Tri-state note 1
x2 note 2 x2 x4

CLK7 Tri-state note 1
x5 note 2 x2 x4

CLK8 Tri-state note 1
x1 x2 x4

Input Range -
Ordering Information

Part / Order Number
671M-01* 671M-01T* 671M-01LF 671M-01LFT

Marking

ICS671M-01 ICS671M-01 ICS671M-01LF ICS671M-01LF

Shipping Packaging

Tubes Tape and Reel

Tubes Tape and Reel

Package
16-pin SOIC 16-pin SOIC 16-pin SOIC 16-pin SOIC

Temperature
0 to +70° C 0 to +70° C 0 to +70° C 0 to +70° C
*NOTE EOL for non-green parts to occur on 5/13/10 per PDN U-09-01

Parts that are ordered with a "LF" suffix to the part number are the Pb-Free configuration and are RoHS compliant. While the information presented herein has been checked for both accuracy and reliability, Integrated Device Technology IDT assumes no responsibility for either its use or for the infringement of any patents or other rights of third parties, which would result from its use. No other circuits, patents, or licenses are implied. This product is intended for use in normal commercial applications. Any other applications such as those requiring extended temperature range, high reliability, or other extraordinary environmental requirements are not recommended without additional processing by IDT. IDT reserves the right to change any circuitry or specifications without notice. IDT does not authorize or warrant any IDT product for use in life support devices or critical medical instruments.

IDT / ICS ZERO DELAY LOW SKEW BUFFER AND MULTIPLIER

ICS671-01 ZERO DELAY LOW SKEW BUFFER AND MULTIPLIER

ZDB AND MULTIPLIER

Innovate with IDT and accelerate your future networks. Contact:

For Sales
800-345-7015 408-284-8200 Fax 408-284-2775

For Tech Support

Corporate Headquarters

Integrated Device Technology, Inc.
2006 Integrated Device Technology, Inc. All rights reserved. Product specifications subject to change without notice. IDT and the IDT logo are trademarks of Integrated Device Technology, Inc. Accelerated Thinking is a service mark of Integrated Device Technology, Inc. All other brands, product names and marks are or may be trademarks or registered trademarks used to identify products or services of their respective owners. Printed in USA

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived ICS671M-01 Datasheet file may be downloaded here without warranties.

Datasheet ID: ICS671M-01 637058