ICS309RI

ICS309RI Datasheet

ICS309

Part	Datasheet
ICS309RI	ICS309RI (pdf)

Related Parts	Information
ICS309R	ICS309R
ICS309RIT	ICS309RIT
ICS309RT	ICS309RT

PDF Datasheet Preview
DATASHEET SERIAL PROGRAMMABLE TRIPLE PLL SS VERSACLOCK SYNTH ICS309 The ICS309 is a versatile serially-programmable, triple PLL with spread spectrum clock source. The ICS309 can generate any frequency from 250kHz to 200 MHz, and up to 6 different output frequencies simultaneously. The outputs can be reprogrammed on-the-fly, and will lock to a new frequency in 10 ms or less. To reduce system EMI emissions, spread spectrum is available that supports modulation frequencies of 31 kHz and 120 kHz, as well as modulation amplitudes of to Both center and down-spread options are available. The device includes a PDTS pin which tri-states the output clocks and powers down the entire chip. The ICS309 default for non-programmed start-up are buffered reference clock outputs on all clock output pins. IDT’s VersaClockTM programming software allows the user to configure up to 9 outputs with target frequencies, spread spectrum capabilities or buffered reference clock outputs. The VersaClockTM software automatically configures the PLLs for optimal overall performance. Block Diagram • Packaged in 20-pin SSOP QSOP • Available in Pb lead free package • Highly accurate frequency generation • M/N Multiplier PLL M = N = • Serially programmable user determines the output frequency via a 3-wire interface • Spread Spectrum frequency modulation for reduced system EMI • Center or Down Spread up to 4% total • Selectable 32 kHz and 120 kHz modulation • Eliminates need for custom quartz oscillators • Input crystal frequency of 5 - 27 MHz • Input clock frequency of 3 - 50 MHz • Output clock frequencies up to 200 MHz • Operating voltage of V • Up to 9 reference clock outputs • Power down tri-state mode • Very low jitter NOTE EOL for non-green parts to occur on 5/13/10 per PDN U-09-01 STROBE SCLK DATA Crystal or clock input X1/ICLK Crystal O s c illa to r External capacitors are required with a crystal input. VDD 3 PLL1 with Spread S p e c tru m PLL2 PLL3 Divide Logic and Output Enable Control GND 2 PDTS CLK1 CLK2 CLK3 CLK4 CLK5 CLK6 CLK7 CLK8 CLK9 IDT / ICS SERIAL PROGRAMMABLE TRIPLE PLL SS VERSACLOCK SYNTH 1 ICS309 ICS309 SERIAL PROGRAMMABLE TRIPLE PLL SS VERSACLOCK SYNTH SER PROG CLOCK SYNTHESIZER Pin Assignment DATA X 1 /IC L K CLK9 CLK1 CLK2 CLK3 CLK4 STROBE SCLK Ordering Information Part / Order Number 309R* 309RT* 309RI* 309RIT* 309RLF 309RLFT 309RILF 309RILFT Marking ICS309R ICS309RI ICS309RLF ICS309RILF Shipping packaging Tubes Tape and Reel Tubes Tape and Reel Tubes Tape and Reel Tubes Tape and Reel Package 20-pin SSOP 20-pin SSOP 20-pin SSOP 20-pin SSOP 20-pin SSOP 20-pin SSOP 20-pin SSOP 20-pin SSOP Temperature 0 to +70° C 0 to +70° C -40 to +85° C -40 to +85° C 0 to +70° C 0 to +70° C -40 to +85° C -40 to +85° C *NOTE EOL for non-green parts to occur on 5/13/10 per PDN U-09-01 Parts that are ordered with a "LF" suffix to the part number are the Pb-Free configuration and are RoHS compliant. While the information presented herein has been checked for both accuracy and reliability, Integrated Device Technology IDT assumes no responsibility for either its use or for the infringement of any patents or other rights of third parties, which would result from its use. No other circuits, patents, or licenses are implied. This product is intended for use in normal commercial applications. Any other applications such as those requiring extended temperature range, high reliability, or other extraordinary environmental requirements are not recommended without additional processing by IDT. IDT reserves the right to change any circuitry or specifications without notice. IDT does not authorize or warrant any IDT product for use in life support devices or critical medical instruments. IDT / ICS SERIAL PROGRAMMABLE TRIPLE PLL SS VERSACLOCK SYNTH 8 ICS309 ICS309 SERIAL PROGRAMMABLE TRIPLE PLL SS VERSACLOCK SYNTH SER PROG CLOCK SYNTHESIZER Innovate with IDT and accelerate your future networks. Contact: For Sales 800-345-7015 408-284-8200 Fax 408-284-2775 For Tech Support Corporate Headquarters Integrated Device Technology, Inc. 2006 Integrated Device Technology, Inc. All rights reserved. Product specifications subject to change without notice. IDT and the IDT logo are trademarks of Integrated Device Technology, Inc. Accelerated Thinking is a service mark of Integrated Device Technology, Inc. All other brands, product names and marks are or may be trademarks or registered trademarks used to identify products or services of their respective owners. Printed in USA

PDF Datasheet Preview

DATASHEET

SERIAL PROGRAMMABLE TRIPLE PLL SS VERSACLOCK SYNTH

ICS309

The ICS309 is a versatile serially-programmable, triple PLL with spread spectrum clock source. The ICS309 can generate any frequency from 250kHz to 200 MHz, and up to 6 different output frequencies simultaneously. The outputs can be reprogrammed on-the-fly, and will lock to a new frequency in 10 ms or less.

To reduce system EMI emissions, spread spectrum is available that supports modulation frequencies of 31 kHz and 120 kHz, as well as modulation amplitudes of to Both center and down-spread options are available.

The device includes a PDTS pin which tri-states the output clocks and powers down the entire chip.

The ICS309 default for non-programmed start-up are buffered reference clock outputs on all clock output pins. IDT’s VersaClockTM programming software allows the user to configure up to 9 outputs with target frequencies, spread spectrum capabilities or buffered reference clock outputs. The VersaClockTM software automatically configures the PLLs for optimal overall performance.

Block Diagram
• Packaged in 20-pin SSOP QSOP
• Available in Pb lead free package
• Highly accurate frequency generation
• M/N Multiplier PLL M = N =
• Serially programmable user determines the output
frequency via a 3-wire interface
• Spread Spectrum frequency modulation for reduced
system EMI
• Center or Down Spread up to 4% total
• Selectable 32 kHz and 120 kHz modulation
• Eliminates need for custom quartz oscillators
• Input crystal frequency of 5 - 27 MHz
• Input clock frequency of 3 - 50 MHz
• Output clock frequencies up to 200 MHz
• Operating voltage of V
• Up to 9 reference clock outputs
• Power down tri-state mode
• Very low jitter

NOTE EOL for non-green parts to occur on 5/13/10 per PDN U-09-01

STROBE SCLK DATA

Crystal or clock input X1/ICLK

Crystal O s c illa to r

External capacitors are required with a crystal input.

VDD 3 PLL1 with

Spread S p e c tru m

PLL2

PLL3

Divide Logic and Output Enable Control

GND 2

PDTS

CLK1 CLK2 CLK3 CLK4 CLK5 CLK6 CLK7 CLK8 CLK9

IDT / ICS SERIAL PROGRAMMABLE TRIPLE PLL SS VERSACLOCK SYNTH 1

ICS309

ICS309 SERIAL PROGRAMMABLE TRIPLE PLL SS VERSACLOCK SYNTH

SER PROG CLOCK SYNTHESIZER

Pin Assignment

DATA

X 1 /IC L K

CLK9

CLK1

CLK2

CLK3

CLK4

STROBE

SCLK
Ordering Information

Part / Order Number 309R* 309RT* 309RI* 309RIT* 309RLF
309RLFT 309RILF 309RILFT

Marking ICS309R ICS309RI ICS309RLF ICS309RILF

Shipping packaging Tubes

Tape and Reel Tubes

Tape and Reel Tubes

Tape and Reel Tubes

Tape and Reel

Package 20-pin SSOP 20-pin SSOP 20-pin SSOP 20-pin SSOP 20-pin SSOP 20-pin SSOP 20-pin SSOP 20-pin SSOP

Temperature 0 to +70° C 0 to +70° C -40 to +85° C -40 to +85° C 0 to +70° C 0 to +70° C -40 to +85° C -40 to +85° C
*NOTE EOL for non-green parts to occur on 5/13/10 per PDN U-09-01

Parts that are ordered with a "LF" suffix to the part number are the Pb-Free configuration and are RoHS compliant.

While the information presented herein has been checked for both accuracy and reliability, Integrated Device Technology IDT assumes no responsibility for either its use or for the infringement of any patents or other rights of third parties, which would result from its use. No other circuits, patents, or licenses are implied. This product is intended for use in normal commercial applications. Any other applications such as those requiring extended temperature range, high reliability, or other extraordinary environmental requirements are not recommended without additional processing by IDT. IDT reserves the right to change any circuitry or specifications without notice. IDT does not authorize or warrant any IDT product for use in life support devices or critical medical instruments.

IDT / ICS SERIAL PROGRAMMABLE TRIPLE PLL SS VERSACLOCK SYNTH 8

ICS309

ICS309 SERIAL PROGRAMMABLE TRIPLE PLL SS VERSACLOCK SYNTH

SER PROG CLOCK SYNTHESIZER

Innovate with IDT and accelerate your future networks. Contact:

For Sales
800-345-7015 408-284-8200 Fax 408-284-2775

For Tech Support

Corporate Headquarters

Integrated Device Technology, Inc.
2006 Integrated Device Technology, Inc. All rights reserved. Product specifications subject to change without notice. IDT and the IDT logo are trademarks of Integrated Device Technology, Inc. Accelerated Thinking is a service mark of Integrated Device Technology, Inc. All other brands, product names and marks are or may be trademarks or registered trademarks used to identify products or services of their respective owners. Printed in USA

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived ICS309RI Datasheet file may be downloaded here without warranties.

Datasheet ID: ICS309RI 636978