TUA 6030

TUA 6030 Datasheet

3-Band TV Tuner IC TUA6030, TUA6032 Version

Part	Datasheet
TUA 6030	TUA 6030 (pdf)

PDF Datasheet Preview
Wireless Components 3-Band TV Tuner IC TUA6030, TUA6032 Version Specification January 2002 Previous Version:Target Data Sheet, V1.0, November 1999 Page in previous Version Page in current Version Version to V1.1, status to preliminary. Product Info Product Info Ordering code added. Div. components changed. Div. components changed. Junction temperature and storage temperature +125 °C max. Bus inputs SCL, SDA VIH = V. 5-8,5-9, 5-10 5-8,5-9, 5-10 Input conductance, input capacitance corrected. 5-10 5-10 Phase noise ±1 kHz frequency offset deleted. Phase noise, LOW band oscillator = 92 dBc/Hz min ±10 kHz. Phase noise, MID band oscillator = 92 dBc/Hz min ±10 kHz. 5-11 5-11 Phase noise ±1 kHz frequency offset deleted. Phase noise, HIGH band oscillator = 87 dBc/Hz min. 5-14 5-14 Table 5-5, Description of Symbols CP and OS ’default’ added. 5-15 5-15 Table 5-5, Test Modes Normal operation ’default’ added. 5-14 5-14 Table 5-5, Description of Symbols CP and OS ’default’ added. 5-15 5-15 Table 5-5, Test Modes Normal operation ’default’ added. 5-16 5-16 Table 5-10, A to D converter levels, footnote ’No erratic codes in the transition’ added, Table 5-1, Defaults at power-on reset, Auxiliary byte, bit5 = 5-18, 5-19, 5-20 5-18, 5-19, 5-20 Smith charts added. Tbf’s replaced. Previous Version:Preliminary Data Sheet, V1.1, August 2000 Version to V2.0, preliminary deleted. LOW-/MID Oscillator DC levels corrected. 4-2, 4-3 4-2, 4-3 Application circuits modified. New definition of thermal properties. 5-6, 5-7 Saturation Voltages for P0, 2, 3 added. 5-11 Ordering code of TUA6032 added. TE, TE, are registered trademarks of Infineon Technologies AG. ACE , ASM , ASP , POTSWIRE , QuadFALC , SCOUT are trademarks of Infineon Technologies AG. Edition Published by Infineon Technologies AG Balanstraße 73, 81541 München Infineon Technologies AG All Rights Reserved. Attention please! As far as patents or other rights of third parties are concerned, liability is only assumed for components, not for applications, processes and circuits implemented within components or assemblies. The information describes the type of component and shall not be considered as assured characteristics. Terms of delivery and rights to change design reserved. Due to technical requirements components may contain dangerous substances. For information on the types in question please contact your nearest Infineon Technologies Office. Infineon Technologies AG is an approved CECC manufacturer. Packing Please use the recycling operators known to you. We can also help you get in touch with your nearest sales office. By agreement we will take packing material back, if it is sorted. You must bear the costs of transport. For packing material that is returned to us unsorted or which we are not obliged to accept, we shall have to invoice you for any costs incurred. Components used in life-support devices or systems must be expressly authorized for such purpose! Critical components1 of the Infineon Technologies AG, may only be used in life-support devices or systems2 with the express written approval of the Infineon Technologies AG. 1 A critical component is a component used in a life-support device or system whose failure can reasonably be expected to cause the failure of that life- support device or system, or to affect its safety or effectiveness of that device or system. 2 Life support devices or systems are intended a to be implanted in the human body, or b to support and/or maintain and sustain human life. If they fail, it is reasonable to assume that the health of the user may be endangered. TUA6030, TUA6032 Product Info Product Info The TUA6030, TUA6032 devices com- Package bine a mixer-oscillator block with a digitally programmable phase locked loop PLL for use in TV and VCR tuners. General s Suitable for PAL/NTSC and Digital Video Broadcasting s Wideband AGC detector for internal tuner AGC − 5 programmable take-over points − 2 programmable time constants s Full ESD protection Mixer/Oscillator s High impedance mixer input common emitter for LOW band s Low impedance mixer input common base for MID band s Low impedance mixer input common base for HIGH band PLL s 4 independent I2C addresses s I2C bus protocol compatible with V and 5V micro-controllers up to 400 kHz s Short lock-in time s High voltage VCO tuning output s 4 PNP ports s 3 NPN ports s 2 pin oscillator for LOW band s 1 NPN port/ADC input s 2 pin oscillator for MID band s 4 pin oscillator for HIGH band IF-Amplifier s IF preamplifier with symmetrical 75 output impedance able to drive a SAW filter 500 pF s Internal LOW/MID/HIGH band switch s Lock-in flag s Programmable reference divider ratio 24, 64, 80, 128 s Programmable charge pump current Application s The IC is suitable for PAL and NTSC tuners in TV- and VCR-sets or set-top receivers for analog TV and Digital Video Broadcasting. s The AGC stage makes the tuner AGC independent of the Video-IF AGC. Ordering Information Type TUA6030 TUA6032 Ordering Code Q67037-A1146 tape and reel Q67037-A1 tape and reel Package P-TSSOP-38 P-TSSOP-38 Wireless Components Product Info Specification, January 2002 1 Table of Contents 1 Table of Contents 1-1 2 Product Description 2-7 Overview 2-8 Features 2-8 Application 2-9 Package Outlines 2-10 3 Functional Description. 3-11 Pin Configuration 3-12 Pin Definition and Function 3-13 Block Diagram 3-19 Circuit Description. 3-20 4 Applications 4-23 4-1 Application Circuit for NTSC 4-24 4-2 Application Circuit for PAL 4-25 5 Reference 5-26 Electrical Data. 5-27 Absolute Maximum Ratings 5-27 Operating Range 5-29 AC/DC Characteristics 5-30 Programming 5-39 Table 5-4 Bit Allocation Read / Write 5-39 Table 5-5 Description of Symbols. 5-39 Table 5-6 Address selection 5-40 Table 5-7 Test modes. 5-40 Table 5-8 Reference divider ratios 5-40 Table 5-9 AGC take-over point 5-41 Table 5-10 A to D converter levels 5-41 Table 5-11 Defaults at power-on reset 5-41 Table 5-12 Internal band selection 5-41 I2C Bus Timing Diagram. 5-43 Electrical Diagrams 5-44 Input admittance S11 of the LOW band mixer 40 to 140 MHz . 5-44 Input impedance S11 of the MID band mixer 150 to 455 MHz 5-44 Input impedance S11 of the HIGH band mixer 450 to 865 MHz 5-45 Wireless Components Specification, January 2002 TUA6030, TUA6032 Table of Contents Output admittance S22 of the of the Mixer output 30 to 50 MHz 5-45 Output impedance S22 of the IF amplifier 30 to 50 MHz 5-46 Measurement Circuits 5-47 Gain GV measurement in LOW band. 5-47 Gain GV measurement in MID and HIGH bands 5-47 Matching circuit for optimum noise figure in LOW band 5-48 Noise figure NF measurement in LOW band 5-48 Noise figure NF measurement in MID and HIGH bands 5-49 Cross modulation measurement in LOW band 5-49 Cross modulation measurement in MID and HIGH bands 5-50 Ripple susceptibility measurement 5-50 Wireless Components Specification, January 2002 2 Product Description Contents of this Chapter Overview 2-8 Features 2-8 Application 2-9 Package Outlines 2-10 Wireless Components Specification, January 2002 TUA6030, TUA6032 Product Description Overview The TUA6030, TUA6032 devices combine a mixer-oscillator block with a digitally programmable phase locked loop PLL for use in TV and VCR tuners. The mixer-oscillator block includes three balanced mixers one mixer with an unbalanced high-impedance input and two mixers with a balanced low-impedance input , two 2-pin asymmetrical oscillators for the LOW and the MID band, one 4-pin symmetrical oscillator for the HIGH band, an IF amplifier, a reference voltage, and a band switch. The PLL block with four independently selectable chip addresses forms a digitally programmable phase locked loop. With a 4 MHz quartz crystal, the PLL permits precise setting of the frequency of the tuner oscillator up to 1024 MHz in increments of 50, or kHz. The tuning process is controlled by a microprocessor via an I2C bus. The device has 8 output ports, one of them P6 can also be used as ADC input port. A flag is set when the loop is locked. The lock flag can be read by the processor via the I2C bus. General s Suitable for PAL/NTSC and Digital Video Broadcasting s Wideband AGC detector for internal tuner AGC − 5 programmable take-over points − 2 programmable time constants s Full ESD protection Mixer/Oscillator s High impedance mixer input common emitter for LOW band s Low impedance mixer input common base for MID band s Low impedance mixer input common base for HIGH band s 2 pin oscillator for LOW band s 2 pin oscillator for MID band s 4 pin oscillator for HIGH band IF-Amplifier s IF preamplifier with symmetrical 75 output impedance able to drive a SAW filter 500 pF PLL s 4 independent I2C addresses s I2C bus protocol compatible with V and 5V micro-controllers up to 400 kHz Wireless Components Specification, January 2002 TUA6030, TUA6032 Product Description s Short lock-in time s High voltage VCO tuning output s 4 PNP ports s 3 NPN ports s 1 NPN port/ADC input s Internal LOW/MID/HIGH band switch s Lock-in flag s Programmable reference divider ratio 24, 64, 80, 128 s Programmable charge pump current Application s The IC is suitable for PAL and NTSC tuners in TV- and VCR-sets or cable set-top receivers for analog TV and Digital Video Broadcasting.

PDF Datasheet Preview

Wireless Components
3-Band TV Tuner IC TUA6030, TUA6032 Version

Specification January 2002

Previous Version:Target Data Sheet, V1.0, November 1999

Page in previous Version

Page in current Version

Version to V1.1, status to preliminary.
Product Info Product Info Ordering code added.

Div. components changed.

Div. components changed.

Junction temperature and storage temperature +125 °C max.

Bus inputs SCL, SDA VIH = V.
5-8,5-9, 5-10 5-8,5-9, 5-10 Input conductance, input capacitance corrected.
5-10
5-10

Phase noise ±1 kHz frequency offset deleted. Phase noise, LOW band oscillator = 92 dBc/Hz min ±10 kHz. Phase noise, MID band oscillator = 92 dBc/Hz min ±10 kHz.
5-11
5-11

Phase noise ±1 kHz frequency offset deleted. Phase noise, HIGH band oscillator = 87 dBc/Hz min.
5-14
5-14

Table 5-5, Description of Symbols CP and OS ’default’ added.
5-15
5-15

Table 5-5, Test Modes Normal operation ’default’ added.
5-14
5-14

Table 5-5, Description of Symbols CP and OS ’default’ added.
5-15
5-15

Table 5-5, Test Modes Normal operation ’default’ added.
5-16
5-16

Table 5-10, A to D converter levels, footnote ’No erratic codes in the transition’ added, Table 5-1, Defaults at power-on reset, Auxiliary byte, bit5 =
5-18, 5-19, 5-20
5-18, 5-19, 5-20

Smith charts added.

Tbf’s replaced.

Previous Version:Preliminary Data Sheet, V1.1, August 2000

Version to V2.0, preliminary deleted.

LOW-/MID Oscillator DC levels corrected.
4-2, 4-3
4-2, 4-3

Application circuits modified.

New definition of thermal properties.
5-6, 5-7

Saturation Voltages for P0, 2, 3 added.
5-11
Ordering code of TUA6032 added.

TE, TE, are registered trademarks of Infineon Technologies AG.

ACE , ASM , ASP , POTSWIRE , QuadFALC , SCOUT are trademarks of Infineon Technologies AG.

Edition Published by Infineon Technologies AG Balanstraße 73, 81541 München

Infineon Technologies AG

All Rights Reserved. Attention please! As far as patents or other rights of third parties are concerned, liability is only assumed for components, not for applications, processes and circuits implemented within components or assemblies. The information describes the type of component and shall not be considered as assured characteristics. Terms of delivery and rights to change design reserved. Due to technical requirements components may contain dangerous substances. For information on the types in question please contact your nearest Infineon Technologies Office. Infineon Technologies AG is an approved CECC manufacturer. Packing Please use the recycling operators known to you. We can also help you get in touch with your nearest sales office. By agreement we will take packing material back, if it is sorted. You must bear the costs of transport. For packing material that is returned to us unsorted or which we are not obliged to accept, we shall have to invoice you for any costs incurred. Components used in life-support devices or systems must be expressly authorized for such purpose! Critical components1 of the Infineon Technologies AG, may only be used in life-support devices or systems2 with the express written approval of the Infineon Technologies AG. 1 A critical component is a component used in a life-support device or system whose failure can reasonably be expected to cause the failure of that life-
support device or system, or to affect its safety or effectiveness of that device or system. 2 Life support devices or systems are intended a to be implanted in the human body, or b to support and/or maintain and sustain human life. If they
fail, it is reasonable to assume that the health of the user may be endangered.

TUA6030, TUA6032

Product Info

Product Info

The TUA6030, TUA6032 devices com- Package bine a mixer-oscillator block with a digitally programmable phase locked loop PLL for use in TV and VCR tuners.

General
s Suitable for PAL/NTSC and Digital Video Broadcasting
s Wideband AGC detector for internal tuner AGC − 5 programmable take-over points − 2 programmable time constants
s Full ESD protection

Mixer/Oscillator
s High impedance mixer input common emitter for LOW band
s Low impedance mixer input common base for MID band
s Low impedance mixer input common base for HIGH band

PLL s 4 independent I2C addresses s I2C bus protocol compatible with

V and 5V micro-controllers up to 400 kHz
s Short lock-in time
s High voltage VCO tuning output
s 4 PNP ports
s 3 NPN ports
s 2 pin oscillator for LOW band
s 1 NPN port/ADC input
s 2 pin oscillator for MID band
s 4 pin oscillator for HIGH band

IF-Amplifier
s IF preamplifier with symmetrical 75 output impedance able to drive a SAW filter 500 pF
s Internal LOW/MID/HIGH band switch
s Lock-in flag
s Programmable reference divider ratio 24, 64, 80, 128
s Programmable charge pump current

Application
s The IC is suitable for PAL and NTSC tuners in TV- and VCR-sets or set-top receivers for analog TV and Digital Video Broadcasting.
s The AGC stage makes the tuner AGC independent of the Video-IF AGC.
Ordering Information

Type TUA6030 TUA6032
Ordering Code Q67037-A1146 tape and reel

Q67037-A1 tape and reel

Package P-TSSOP-38 P-TSSOP-38

Wireless Components

Product Info

Specification, January 2002
1 Table of Contents
1 Table of Contents 1-1
2 Product Description 2-7 Overview 2-8 Features 2-8 Application 2-9 Package Outlines 2-10
3 Functional Description. 3-11 Pin Configuration 3-12 Pin Definition and Function 3-13 Block Diagram 3-19 Circuit Description. 3-20
4 Applications 4-23 4-1 Application Circuit for NTSC 4-24 4-2 Application Circuit for PAL 4-25
5 Reference 5-26 Electrical Data. 5-27 Absolute Maximum Ratings 5-27 Operating Range 5-29 AC/DC Characteristics 5-30

Programming 5-39 Table 5-4 Bit Allocation Read / Write 5-39 Table 5-5 Description of Symbols. 5-39 Table 5-6 Address selection 5-40 Table 5-7 Test modes. 5-40 Table 5-8 Reference divider ratios 5-40 Table 5-9 AGC take-over point 5-41 Table 5-10 A to D converter levels 5-41 Table 5-11 Defaults at power-on reset 5-41 Table 5-12 Internal band selection 5-41

I2C Bus Timing Diagram. 5-43

Electrical Diagrams 5-44 Input admittance S11 of the LOW band mixer 40 to 140 MHz . 5-44 Input impedance S11 of the MID band mixer 150 to 455 MHz 5-44 Input impedance S11 of the HIGH band mixer 450 to 865 MHz 5-45

Wireless Components

Specification, January 2002

TUA6030, TUA6032

Table of Contents

Output admittance S22 of the of the Mixer output 30 to 50 MHz 5-45 Output impedance S22 of the IF amplifier 30 to 50 MHz 5-46

Measurement Circuits 5-47 Gain GV measurement in LOW band. 5-47 Gain GV measurement in MID and HIGH bands 5-47 Matching circuit for optimum noise figure in LOW band 5-48 Noise figure NF measurement in LOW band 5-48 Noise figure NF measurement in MID and HIGH bands 5-49 Cross modulation measurement in LOW band 5-49 Cross modulation measurement in MID and HIGH bands 5-50 Ripple susceptibility measurement 5-50

Wireless Components

Specification, January 2002
2 Product Description

Contents of this Chapter Overview 2-8 Features 2-8 Application 2-9 Package Outlines 2-10

Wireless Components

Specification, January 2002

TUA6030, TUA6032

Product Description

Overview

The TUA6030, TUA6032 devices combine a mixer-oscillator block with a digitally programmable phase locked loop PLL for use in TV and VCR tuners. The mixer-oscillator block includes three balanced mixers one mixer with an unbalanced high-impedance input and two mixers with a balanced low-impedance input , two 2-pin asymmetrical oscillators for the LOW and the MID band, one 4-pin symmetrical oscillator for the HIGH band, an IF amplifier, a reference voltage, and a band switch.

The PLL block with four independently selectable chip addresses forms a digitally programmable phase locked loop. With a 4 MHz quartz crystal, the PLL permits precise setting of the frequency of the tuner oscillator up to 1024 MHz in increments of 50, or kHz. The tuning process is controlled by a microprocessor via an I2C bus. The device has 8 output ports, one of them P6 can also be used as ADC input port. A flag is set when the loop is locked. The lock flag can be read by the processor via the I2C bus.

General s Suitable for PAL/NTSC and Digital Video Broadcasting s Wideband AGC detector for internal tuner AGC
− 5 programmable take-over points − 2 programmable time constants s Full ESD protection Mixer/Oscillator s High impedance mixer input common emitter for LOW band s Low impedance mixer input common base for MID band s Low impedance mixer input common base for HIGH band s 2 pin oscillator for LOW band s 2 pin oscillator for MID band s 4 pin oscillator for HIGH band IF-Amplifier s IF preamplifier with symmetrical 75 output impedance able to drive a SAW filter 500 pF PLL s 4 independent I2C addresses s I2C bus protocol compatible with V and 5V micro-controllers up to 400 kHz

Wireless Components

Specification, January 2002

TUA6030, TUA6032

Product Description
s Short lock-in time s High voltage VCO tuning output s 4 PNP ports s 3 NPN ports s 1 NPN port/ADC input s Internal LOW/MID/HIGH band switch s Lock-in flag s Programmable reference divider ratio 24, 64, 80, 128 s Programmable charge pump current

Application
s The IC is suitable for PAL and NTSC tuners in TV- and VCR-sets or cable set-top receivers for analog TV and Digital Video Broadcasting.

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived TUA6030 Datasheet file may be downloaded here without warranties.

Datasheet ID: TUA6030 638849