Prototypes - PowerHap 15G Type Z63000Z2910Z 1Z 4
Part | Datasheet |
---|---|
![]() |
Z63000Z2910Z 1Z 4 (pdf) |
PDF Datasheet Preview |
---|
Piezo Haptic Actuator - PowerHap 15G Type, Preliminary data Series/Type Ordering code: Date Version: Prototypes - PowerHap 15G Type Z63000Z2910Z 1Z 4 2017-06-09 6 Content of header bars 1 and 2 of data sheet will be automatically entered in headers and footers! Please fill in the table and then change the color to "white". This ensures that the table disappears invisible for the customer PDF. Don't change formatting when entering or pasting text in the table and don't add any cell or line in and to it! Identification/Classification 1 Piezo Haptic Actuator - PowerHap header 1 + top left bar : Identification/Classification 2 15G Type, Preliminary data header 2 + bottom left header bar : Ordering code top right header bar Z63000Z2910Z 1Z 4 Series/Type bottom right header bar Prototypes - PowerHap 15G Type Preliminary data optional : Preliminary data Department: Date: 2017-06-09 Version: EPCOS AG Reproduction, publication and dissemination of this publication, enclosures hereto and the information contained therein without EPCOS' prior express consent is prohibited. EPCOS AG is a TDK Group Company. Piezo Haptic Actuator - PowerHap 15G Type, Preliminary data Preliminary data • Large Displacement • High acceleration • High force • Low insertion height • Fast response time • Integrated sensor functionality Z63000Z2910Z 1Z 4 Prototypes - PowerHap 15G Type Design • RoHS-compatible PZT lead zirconium titanate ceramic • Copper inner electrodes • Dimension of ceramic body 26 x 26 x 1 mm • Titanium cymbals for displacement amplification • Polarized at 120 V • Contains SVHC substance 12626-81-2 Electrical ratings Parameter Ratings Rated voltage 0 120V Operating temperature powered -40°C 85°C Operating temperature unpowered -40°C 125°C Maximum compressive force on actuator 0 20N Maximum operation frequency 500Hz* Maximum voltage gradient 1.2MV/s *Operation frequency is limited by self-heating of the device. At 120V, 500Hz, square wave conditions, a maximum temperature increase of 30°C is observed. Electrical characteristics Parameter Capacitance C Dissipation factor Displacement s Loading Energy E = Q*U/2 Stiffness k Acceleration Conditions 25°C, 1kHz, 1Vrms 25°C, 1kHz, 1Vrms 25°C, 120V, measured at cymbal end-caps 25°C, 120V 25°C, 120V various load stiffness preload 10N 25 °C, load 20 g, square wave, 120V 25 °C, load 100 g, square wave, 120V 25 °C, load 500 g, square wave, 120V Expected value typically 3.6µF typically < typically 200µm typically 41mJ typically 100N/mm typically 65 G typically 15 G typically G General Polarity of the prototypes: Display of ordering codes for EPCOS products The ordering code for one and the same EPCOS product can be represented differently in data sheets, data books, other publications, on the EPCOS website, or in order-related documents such as shipping notes, order confirmations and product labels. The varying representations of the Please read Cautions and warnings and Important notes at the end of this document. Page 7 of 9 2017-06-09 Piezo Haptic Actuator - PowerHap 15G Type, Preliminary data Z63000Z2910Z 1Z 4 Prototypes - PowerHap 15G Type Preliminary data ordering codes are due to different processes employed and do not affect the specifications of the respective products. Detailed information can be found on the Internet under Please read Cautions and warnings and Important notes at the end of this document. Page 8 of 9 2017-06-09 Important notes The following applies to all products named in this publication Some parts of this publication contain statements about the suitability of our products for certain areas of application. These statements are based on our knowledge of typical requirements that are often placed on our products in the areas of application concerned. We nevertheless expressly point out that such statements cannot be regarded as binding statements about the suitability of our products for a particular customer application. As a rule, EPCOS is either unfamiliar with individual customer applications or less familiar with them than the customers themselves. For these reasons, it is always ultimately incumbent on the customer to check and decide whether an EPCOS product with the properties described in the product specification is suitable for use in a particular customer application. We also point out that in individual cases, a malfunction of electronic components or failure before the end of their usual service life cannot be completely ruled out in the current state of the art, even if they are operated as specified. In customer applications requiring a very high level of operational safety and especially in customer applications in which the malfunction or failure of an electronic component could endanger human life or health e.g. in accident prevention or life-saving systems , it must therefore be ensured by means of suitable design of the customer application or other action taken by the customer e.g. installation of protective circuitry or redundancy that no injury or damage is sustained by third parties in the event of malfunction or failure of an electronic component. The warnings, cautions and product-specific notes must be observed. In order to satisfy certain technical requirements, some of the products described in this publication may contain substances subject to restrictions in certain jurisdictions e.g. because they are classed as hazardous . Useful information on this will be found in our Material Data Sheets on the Internet Should you have any more detailed questions, please contact our sales offices. We constantly strive to improve our products. Consequently, the products described in this publication may change from time to time. The same is true of the corresponding product specifications. Please check therefore to what extent product descriptions and specifications contained in this publication are still applicable before or when you place an order. We also reserve the right to discontinue production and delivery of products. Consequently, we cannot guarantee that all products named in this publication will always be available. The aforementioned does not apply in the case of individual agreements deviating from the foregoing for customer-specific products. Unless otherwise agreed in individual contracts, all orders are subject to the current version of the “General Terms of Delivery for Products and Services in the Electrical Industry” published by the German Electrical and Electronics Industry Association ZVEI . The trade names EPCOS, CeraDiode, CeraLink, CeraPad, CeraPlas, CSMP, CSSP, CTVS, DeltaCap, DigiSiMic, DSSP, ExoCore, FilterCap, FormFit, LeaXield, MiniBlue, MiniCell, MKD, MKK, MotorCap, PCC, PhaseCap, PhaseCube, PhaseMod, PhiCap, PQSine, SIFERRIT, SIFI, SIKOREL, SilverCap, SIMDAD, SiMic, SIMID, SineFormer, SIOV, SIP5D, SIP5K, TFAP, ThermoFuse, WindCap are trademarks registered or pending in Europe and in other countries. Further information will be found on the Internet at Page 9 of 9 |
More datasheets: HSMF-C116 | FIT0495-I | 2183 | FDG326P | DFR0457 | B39371B5025Z810 | DA14583F01ATDB-P | ASMB-TTF2-0B20B | CYV15G0404RB-BGXC | CYV15G0404RB-BGC |
Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived Z63000Z2910Z 1Z 4 Datasheet file may be downloaded here without warranties.