DFR0483
DFR0483 Datasheet
FireBeetle I/O Expansion Shield SKU DFR0483
| Part | Datasheet |
|---|---|
DFR0483 |
DFR0483 (pdf) |
| PDF Datasheet Preview |
|---|
| FireBeetle I/O Expansion Shield SKU DFR0483 Introduction DFRobot FireBeetle series is the low-power consumption micro-controller intentionally designed for Internet of Things IoT . The series micro-controllers aims at IoT node of low-power consumption, attending to build the IoT hardware platform quickly and conveniently. There are three types of FireBeetle, containing Boards main control , Covers expansion boards and related Accessories. FireBeetle Covers-Gravity I/O Expansion Shield is an adapter for Gravity sensors and modules. With this shield, you can achieve convenient connection between Gravity sensors and FireBeetles. Every sensor will have its independent power pins. Note Please pay attention that the working voltage is 3.3V only. Red pins • DFRobot FireBeetle Compatible • Gravity interface, plug and play, easy to use • Cost-effective • Small size, convenient to install Specification • Input VCC • Output • Supports low-power consumption Mode POWER_EN = LOW • Support maximum discharge current 600mA Output voltage LDO-3.3V • Interface Gravity standard interface. • Digital I/O Pins 10 • Analog Input Pins 5 • Supports I2C x1 • Supports UART x1 • Supports SPI x1 • Dimension 29.00x58.00mm Board Overview FireBeetle Covers-Gravity I/O Expansion Shield Label 1 POWER_EN 2 SS Low-power Consumption Enable Pin Default HIGH , POWER_EN = LOW, 3V3 Pins Red = 0V POWER_EN = HIGH, 3V3 Pins Red = 3.3V SPI SS CS Pin D2, D3, D4, D5 7-7-17 |
| More datasheets: M5674 SL005 | M5674 SL001 | M5674 SL002 | 190-2255 | TIP3055-S | 17000186A | CMF20120D | 3B44-CUSTOM | 3B42-CUSTOM | 3B43-CUSTOM |
Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived DFR0483 Datasheet file may be downloaded here without warranties.