190-2255

190-2255 Datasheet


Part Datasheet
190-2255 190-2255 190-2255 (pdf)
PDF Datasheet Preview
Blackfin uClinux User Guide

Tinyboards from Bluetechnix

Tinyboards maximum performance at minimum size

Contact

Bluetechnix Mechatronische Systeme GmbH Waidhausenstr. 3/19 Vienna AUSTRIA/EUROPE

Document No. Version 6

Date:

Blackfin uClinux User Guide

Tinyboards maximum performance at minimum size

Table of Contents
1 Introduction 8 2 Where to get Information and Help 9 3 Support DVD 10

Content 10 VMWare image setup 10

Install packages 10 Useful 11 Setup without VMWare 11 12 NFS server 12 4 Development Environment Setup 13 5 Software 14 6 Development 15 gnICE JTAG 15 PEEDI JTAG 16 Resources 16 Updating the configuration file 16 Updating the firmware 16 Debugging the uClinux kernel 17 Debugging uClinux applications 17 ICEbear JTAG 17 7 Blackfin uClinux Tool Chain 19 8 The boot 20 Flashing the 20 environment 20 Loading files onto the Core Module 21 Building from source 22 Upgrading the 23 Booting from 23 Programming a uClinux image to flash memory 23

Blackfin uClinux User Guide

Tinyboards maximum performance at minimum size

Booting a uClinux Image 24 9 Blackfin uClinux 26

First impression with 26 Compiling your own uClinux Image 26

Blackfin uClinux User Guide

Tinyboards maximum performance at minimum size

Edition Bluetechnix Mechatronische Systeme GmbH 2007 All Rights Reserved.

The information herein is given to describe certain components and shall not be considered as a guarantee of characteristics. Terms of delivery and rights of technical change reserved.

We hereby disclaim any warranties, including but not limited to warranties of infringement, regarding circuits, descriptions and charts stated herein.

Bluetechnix makes and you receive no warranties or conditions, express, implied, statutory or in any communication with you. Bluetechnix specifically disclaims any implied warranty of merchantability or fitness for a particular purpose.

Bluetechnix takes no liability for any damages and errors causing of the usage of this board. The user of this board is responsible by himself for the functionality of his application. He is allowed to use the board only if he has the qualification. More information is found in the General Terms and Conditions AGB .

Information For further information on technology, delivery terms and conditions and prices please contact Bluetechnix

Warnings Due to technical requirements components may contain dangerous substances.

The Core Modules and development systems contain ESD electrostatic discharge sensitive devices. static charges readily accumulate on the human body and equipment and can discharge without detection. Permanent damage may occur on devices subjected to discharges. Proper ESD precautions are recommended to avoid performance degradation or loss of functionality. Unused Core Modules and Development Boards should be stored in the protective shipping package.

Blackfin uClinux User Guide

Page 5

Tinyboards maximum performance at minimum size

BLACKFIN Products

Core Modules:

Blackfin Processor Module powered by Analog Devices single core processor up to 600MHz, 32MB RAM, 2MB Flash, 120 pin expansion connector and a size of 36.5x31.5mm

Blackfin Processor Module powered by Analog Devices single core processor up to 600MHz, 32MB RAM, 4MB Flash, integrated TP10/100 Ethernet physical transceiver, 120 pin expansion connector and a size of 36.5x31.5mm

Blackfin Processor Module powered by Analog Devices single core processor up to 600MHz, 32MB RAM, 4MB Flash, integrated USB Device, 120 pin expansion connector and a size of 36.5x31.5mm will be replaced by

Blackfin Processor Module powered by Analog Devices single core processor up to 500MHz, 32MB RAM, 8MB Flash, 28x28mm, 120 pin expansion connector, Ball Grid Array or Border Pads for reflow soldering, industrial temperature range to +85°C.

Blackfin Processor Module powered by Analog Devices dual core processor up to 2x 600MHz, 64MB RAM, 8MB Flash, 120 pin expansion connector and a size of 36.5x31.5mm.

The new Blackfin Processor Module is powered by Analog Devices single core processor key features are USB OTG and Ethernet. The 2x60 pin expansion connectors are backwards compatible with other Core Modules.

The new Blackfin Processor Module is powered by Analog Devices single core processor key features are 64MB DDR RAM 2x100 pin expansion connectors.

Development Boards:

Low cost Blackfin processor Evaluation Board with one socket for any Bluetechnix Blackfin Core Module. Additional peripherals are available, such as an
More datasheets: A6111 | 76000831 | 1350 | B88069X5010S102 | M3475 SL001 | M3475 SL005 | M3475 SL002 | M5674 SL005 | M5674 SL001 | M5674 SL002


Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived 190-2255 Datasheet file may be downloaded here without warranties.

Datasheet ID: 190-2255 521957