5962F1123501QXA

5962F1123501QXA Datasheet


12 5962F1123501QXA

Part Datasheet
5962F1123501QXA 5962F1123501QXA 5962F1123501QXA (pdf)
PDF Datasheet Preview
CYRS1049DV33
4-Mbit 512 K x 8 Static RAM with RadStop Technology
4-Mbit 512 K x 8 Static RAM with RadStop Technology

Radiation Performance

Radiation Data
• Total dose =300 Krad
• Soft error rate both heavy ion and proton

Heavy ions 1 x 10-10 upsets/bit-day with single-error correction, double error detection error detection and correction SEC-DED EDAC
• Neutron = x 1014 N/cm2
• Dose rate > x 109 rad Si /s
• Latch up immunity LET = 120 MeV.cm2/mg 125 C

Processing Flows
• Q Grade - Class Q flow in compliance with MIL-PRF 38535
• V Grade - Class V flow in compliance with MIL-PRF 38535 Prototyping Options
• CYPT1049DV33 protos with same functional and timing as
flight units using non-radiation hardened die
• Characteristics in a 36-pin ceramic flat package
• Temperature ranges Military/Space °C to 125 °C
• High speed tAA = 12 ns
• Low active power ICC = 95 mA at 12 ns PMAX = 315 mW
• Low CMOS standby power ISB2 = 15 mA
• V data retention
• Automatic power-down when deselected
• Transistor-transistor logic TTL compatible inputs and outputs
• Easy memory expansion with CE and OE features
• Available in Pb-free 36-pin ceramic flat package For a complete list of related documentation, click here.

Logic Block Diagram

ROW DECODER A11 A12 A13 A14 A15 A16 A17 A18

SENSE AMPS

A0 A1 A2 A3 A4 A5 A6 A7 A8 A9 A10 CE WE

INPUT BUFFER
512K x 8 ARRAY

COLUMN DECODER

POWER DOWN

IIO/O00 IIO/O1 1 II/OO22 IIO/O3 3 IIO/O4 4 IIO/O5 5 IIO/O6 6 IIO/O7 7
• San Jose, CA 95134-1709
• 408-943-2600

CYRS1049DV33

Contents

Functional Description 3 Selection Guide 3 Pin Configuration 3 Maximum Ratings 4 Operating Range 4 DC Electrical Characteristics 4 Capacitance 5 Thermal Resistance 5 AC Test Loads and Waveforms 5 Data Retention Characteristics 6 Data Retention Waveform 6 AC Switching Characteristics 7 Switching Waveforms 8 Truth Table 11
Ordering Information 12 Ordering Code Definitions 12

Package Diagram 13 Acronyms 14 Document Conventions 14

Units of Measure 14 Glossary 14 Document History Page 15 Sales, Solutions, and Legal Information 16

Worldwide Sales and Design Support 16 Products 16 Solutions 16 Cypress Developer Community 16 Technical Support 16

Page 2 of 16

CYRS1049DV33

Functional Description

The CYRS1049DV33 is a high-performance complementary metal oxide semiconductor CMOS static RAM organized as 512 K words by 8 bits with RadStop technology. Cypress’s state-of-the-art RadStop technology is radiation hardened through proprietary design and process hardening techniques. The 4-Mbit fast asynchronous SRAM with RadStop technology is also QML V certified with Defense Logistics Agency Land and Maritime DLAM . To write to the device, take Chip Enable CE and Write Enable WE inputs LOW. Data on the eight I/O pins I/O0 through I/O7 is then written into the location specified on the address pins A0 through A18 . To read from the device, take Chip Enable CE and Output Enable OE LOW while forcing the Write Enable WE HIGH.

Selection Guide

Maximum access time Maximum operating current Maximum CMOS standby current

Military/Space

Unit

Pin Configuration

Figure 36-pin Ceramic Flat Package pinout Top View [1]

A1 2 A2 3

IO0 7 IO1 8 VCC 9

GND 10

IO2 11 IO3 12

WE 13

A5 14

A6 15

A7 16

A8 A9
17 18
36 NC 35 A18 34 A17 33 A16 32 A15 31 OE 30 IO7 29 IO6 28 GND 27 VCC 26 IO5 25 IO4 24 A14 23 A13 22 A12 21 A11 20 A10 19 DNU

Note NC pins are not connected on the die.

Page 3 of 16

CYRS1049DV33

Maximum Ratings

Exceeding maximum ratings may impair the useful life of the device. These user guidelines are not tested. Storage temperature C to +150 C Ambient temperature with power applied C to +125 C Supply voltage on VCC relative to GND [2] V to V DC voltage applied to outputs in High Z state [2] V to VCC + V

DC input voltage [2] V to VCC + V Current into outputs LOW 20 mA Static discharge voltage MIL-STD-883, Method 3015 > 2001 V Latch up current > 140 mA

Operating Range

Range Military/Space

Ambient Temperature
C to +125 C V  V

Speed 12 ns

DC Electrical Characteristics

Over the Operating Range

Parameter

VOL VIH [2] VIL [2]

Output high voltage Output low voltage Input high voltage Input low voltage Input leakage current Output leakage current VCC operating supply current
Ordering Information

The following table contains only the parts that are currently available. If you do not see what you are looking for, contact your local sales representative. For more information, visit the Cypress website at and refer to the product summary page at Cypress maintains a worldwide network of offices, solution centers, manufacturer’s representatives and distributors. To find the office closest to you, visit us at

Speed ns
Ordering Code

Package Diagram

Package Type
12 CYRS1049DV33-12FZMB
001-67583 36-pin ceramic flat package
12 CYPT1049DV33-12FZMB
001-67583 36-pin ceramic flat package, Prototype part
12 5962F1123501QXA
001-67583 36-pin ceramic flat package, DLAM part
12 5962F1123501VXA
001-67583 36-pin ceramic flat package, DLAM part

Contact your local Cypress sales representative for availability of these parts
Ordering Code Definitions

Operating Range Burn-In Burn-In Burn-In Burn-In

CY XX 1 04 9 D V33 - 12 FZ X B

Temperature Range B = Burn-In Temperature grade Thermal Rating X = blank or M blank = Non-military M = Military Package type FZ = 36-pin Ceramic FP Speed 12 = 12 ns V33 = Voltage range 3 V to V D= 90 nm Technology Data width 9 = x 8 bits Density 04 = 4-Mbit 1 = Fast Asynchronous SRAM family XX = RS or PT RS = RadStop PT = Prototype Company ID CY = Cypress

Page 12 of 16

CYRS1049DV33

Package Diagram

Figure 36-pin Ceramic Flat Pack Solder Seal Lid Package Outline, 001-67583
001-67583 *C

Page 13 of 16

CYRS1049DV33

Acronyms

Acronym

Chip Enable

CMOS

Complementary Metal Oxide Semiconductor

DLAM

Defense Logistics Agency Land and Maritime

Do Not Use

EDAC

Error Detection and Correction

Input/Output

Linear Energy Transfer

Output Enable

Qualified Manufacturers List

SEC-DED Single Error Correction Double Error Detection

Single-Event Latch-up

SRAM

Static Random Access Memory

TSOP

Thin Small Outline Package

Transistor-Transistor Logic

Write Enable

Document Conventions

Units of Measure

Symbol °C MHz µA µs mA ns % pF V W

Unit of Measure degree Celsius megahertz microampere microsecond milliampere nanosecond percent picofarad volt watt

Glossary

Total Dose Heavy Ion LET Krad Neutron Prompt Dose RadStop Technology QML V DLAM LSBU LMBU

Permanent device damage due to ions over device life Instantaneous device latch up due to single ion Linear energy transfer measured in MeVcm2 Unit of measurement to determine device life in radiation environments. Permanent device damage due to energetic neutrons or protons Data loss of permanent device damage due to X-rays and gamma rays <20 ns Cypress's patented Rad Hard design methodology Space level certification from DSCC. Defense Logistics Agency Land and Maritime Logical Single Bit Upset. Single bits in a single correction word are in error. Logical Multi Bit Upset. Multiple bits in a single correction word are in error

Page 14 of 16
Updated Ordering Information Additional part numbers added .
3887928
02/07/2013 Updated Radiation Performance Updated Processing Flows Replaced

V grade with Q grade , Prototyping Options Added non-radiation hard,
replaced V grade with Q grade .
Updated Ordering Information Updated part numbers .
4208547

VINI
12/03/2013 Updated Radiation Performance:

Updated Processing Flows:

Added “V Grade - Class V flow in compliance with MIL-PRF

Updated Prototyping Options:

Updated the first bullet as “CYPT1049DV33 protos with same functional and
timing as flight units using non-radiation hardened die”.
Updated Ordering Information Updated part numbers .

Updated Package Diagram:

Updated in new template.
4571914

VINI
11/17/2014 Added related documentation hyperlink in page

Updated Figure 9 in Package Diagram spec 001-67583 *B to *C .

Page 15 of 16

CYRS1049DV33

Sales, Solutions, and Legal Information

Worldwide Sales and Design Support

Cypress maintains a worldwide network of offices, solution centers, manufacturer’s representatives, and distributors. To find the office closest to you, visit us at Cypress Locations.

Products

Solutions

Automotive Aerospace & Defense Clocks & Buffers Interface Lighting & Power Control

Memory
cypress.com/go/automotive cypress.com/aero
cypress.com/go/clocks cypress.com/go/interface cypress.com/go/powerpsoc
cypress.com/go/plc cypress.com/go/memory
psoc.cypress.com/solutions PSoC 1 | PSoC 3 | PSoC 4 | PSoC 5LP

Cypress Developer Community | Forums | Blogs | Video | Training

Technical Support cypress.com/go/support

PSoC
cypress.com/go/psoc

Touch Sensing
cypress.com/go/touch

USB Controllers
cypress.com/go/USB

Wireless/RF
cypress.com/go/wireless

Cypress Semiconductor Corporation, The information contained herein is subject to change without notice. Cypress Semiconductor Corporation assumes no responsibility for the use of any circuitry other than circuitry embodied in a Cypress product. Nor does it convey or imply any license under patent or other rights. Cypress products are not warranted nor intended to be used for medical, life support, life saving, critical control or safety applications, unless pursuant to an express written agreement with Cypress. Furthermore, Cypress does not authorize its products for use as critical components in life-support systems where a malfunction or failure may reasonably be expected to result in significant injury to the user. The inclusion of Cypress products in life-support systems application implies that the manufacturer assumes all risk of such use and in doing so indemnifies Cypress against all charges.

Any Source Code software and/or firmware is owned by Cypress Semiconductor Corporation Cypress and is protected by and subject to worldwide patent protection United States and foreign , United States copyright laws and international treaty provisions. Cypress hereby grants to licensee a personal, non-exclusive, non-transferable license to copy, use, modify, create derivative works of, and compile the Cypress Source Code and derivative works for the sole purpose of creating custom software and or firmware in support of licensee product to be used only in conjunction with a Cypress integrated circuit as specified in the applicable agreement. Any reproduction, modification, translation, compilation, or representation of this Source Code except as specified above is prohibited without the express written permission of Cypress.

Disclaimer CYPRESS MAKES NO WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, WITH REGARD TO THIS MATERIAL, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. Cypress reserves the right to make changes without further notice to the materials described herein. Cypress does not assume any liability arising out of the application or use of any product or circuit described herein. Cypress does not authorize its products for use as critical components in life-support systems where a malfunction or failure may reasonably be expected to result in significant injury to the user. The inclusion of Cypress’ product in a life-support systems application implies that the manufacturer assumes all risk of such use and in doing so indemnifies Cypress against all charges.

Use may be limited by and subject to the applicable Cypress software license agreement.

Page 16 of 16

RadStop is a trademark of Cypress Semiconductor Corporation. All products and company names mentioned in this document may be the trademarks of their respective holders.
More datasheets: DM74ALS125M | DM74ALS125MX | 84872031 | 84872030 | 84872023 | 84872034 | 84872021 | 84872024 | 84872020 | 84872033


Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived 5962F1123501QXA Datasheet file may be downloaded here without warranties.

Datasheet ID: 5962F1123501QXA 508228