AMMC-6231-W10

AMMC-6231-W10 Datasheet

AMMC-6231 GHz Low Noise Amplifier

Part	Datasheet
AMMC-6231-W10	AMMC-6231-W10 (pdf)

Related Parts	Information
AMMC-6231-W50	AMMC-6231-W50

PDF Datasheet Preview
AMMC-6231 GHz Low Noise Amplifier Data Sheet Chip Size 1900 x 800 µm x mils Chip Size Tolerance ± 10 µm ± mils Chip Thickness 100 ± 10 µm 4 ± mils RF Pad Dimensions 110 x 90 µm x mils DC Pad Dimensions 100 x 100 µm x mils Avago Technologies AMMC-6231 is a high gain, low-noise amplifier that operates from 16 GHz to 32 GHz. This LNA provides a wide-band solution for system design since it covers several bands, thus, reduces part inventory. The device has input / output match to 50 Ohm, is unconditionally stable and can be used as either primary or sub-sequential low noise gain stage. By eliminating the complex tuning and assembly processes typically required by hybrid discrete-FET amplifiers, the AMMC6231 is a cost-effective alternative in the 16 - 32 GHz communications receivers. The backside of the chip is both RF and DC ground. This helps simplify the assembly process and reduces assembly related performance variations and costs. It is fabricated in a PHEMT process to provide exceptional noise and gain performance. For improved reliability and moisture protection, the die is passivated at the active areas. Features • Wide frequency range 16 - 32 GHz • High gain 22 dB • Low 50 Noise Figure dB • 50 Input and Output Match • Flat Gain Response • Single 3V Supply Bias Applications • Microwave Radio systems • Satellite VSAT, DBS Up/Down Link • LMDS & Pt-Pt mmW Long Haul • Broadband Wireless Access including and WiMax • WLL and MMDS loops AMMC-6231 Absolute Maximum Ratings[1] Symbol Parameters/Conditions Units Min. Max. Positive Drain Voltage Gate Supply Voltage Drain Current CW Input Power Operating Channel Temp. °C +150 Tstg Storage Case Temp. °C -65 +150 Tmax Maximum Assembly Temp 60 sec max +300 Note Operation in excess of any one of these conditions may result in permanent damage to this device. Note These devices are ESD sensitive. The following precautions are strongly recommended. Ensure that an ESD approved carrier is used when dice are transported from one destination to another. Personal grounding is to be worn at all times when handling these devices. For more details, refer to Avago Technologies Application Note A004R Electrostatic Discharge Damage and Control. ESD Machine Model Class A ESD Human Body Model Class 0 AMMC-6231 DC Specifications/Physical Properties [1] Symbol Id qch-b Parameters and Test Conditions Drain Supply Current under any RF power drive and temperature Vd=3.0 V Thermal Resistance[2] Backside temperature, Tb = 25°C Units Min. Typ. Max. 60 80 °C/W AMMC-6231 RF Specifications [3, 4, 5] TA= 25°C, Vd=3.0 V, Id Q =60 mA, Zin=Zo=50 W Symbol Parameters and Test Conditions Gain Small-signal Gain[6] Noise Figure into 50 W P-1dB Output Power at 1dB Gain Compression Units Minimum dB 20 dB Typical 22 18-28 GHz = 28-32 GHz = Ordering Information AMMC-6231-W10 = 10 devices per tray AMMC-6231-W50 = 50 devices per tray Gold Plated Shim Optional For product information and a complete list of distributors, please go to our web site: Avago, Avago Technologies, and the A logo are trademarks of Avago Technologies Limited in the United States and other countries. Data subject to change. Copyright 2005-2008 Avago Technologies Limited. All rights reserved. Obsoletes 5989-3942EN AV02-1288EN - June 23, 2008

PDF Datasheet Preview

AMMC-6231 GHz Low Noise Amplifier

Data Sheet

Chip Size 1900 x 800 µm x mils Chip Size Tolerance ± 10 µm ± mils Chip Thickness 100 ± 10 µm 4 ± mils RF Pad Dimensions 110 x 90 µm x mils DC Pad Dimensions 100 x 100 µm x mils

Avago Technologies AMMC-6231 is a high gain, low-noise amplifier that operates from 16 GHz to 32 GHz. This LNA provides a wide-band solution for system design since it covers several bands, thus, reduces part inventory. The device has input / output match to 50 Ohm, is unconditionally stable and can be used as either primary or sub-sequential low noise gain stage. By eliminating the complex tuning and assembly processes typically required by hybrid discrete-FET amplifiers, the AMMC6231 is a cost-effective alternative in the 16 - 32 GHz communications receivers. The backside of the chip is both RF and DC ground. This helps simplify the assembly process and reduces assembly related performance variations and costs. It is fabricated in a PHEMT process to provide exceptional noise and gain performance. For improved reliability and moisture protection, the die is passivated at the active areas.

Features
• Wide frequency range 16 - 32 GHz
• High gain 22 dB
• Low 50 Noise Figure dB
• 50 Input and Output Match
• Flat Gain Response
• Single 3V Supply Bias

Applications
• Microwave Radio systems
• Satellite VSAT, DBS Up/Down Link
• LMDS & Pt-Pt mmW Long Haul
• Broadband Wireless Access including and

WiMax
• WLL and MMDS loops

AMMC-6231 Absolute Maximum Ratings[1]

Symbol Parameters/Conditions

Units Min. Max.

Positive Drain Voltage

Gate Supply Voltage

Drain Current

CW Input Power

Operating Channel Temp. °C
+150

Tstg

Storage Case Temp.
°C -65 +150

Tmax Maximum Assembly

Temp 60 sec max
+300

Note Operation in excess of any one of these conditions may result in
permanent damage to this device.

Note These devices are ESD sensitive. The following precautions are strongly recommended. Ensure that an ESD approved carrier is used when dice are transported from one destination to another. Personal grounding is to be worn at all times when handling these devices.

For more details, refer to Avago Technologies Application Note A004R Electrostatic Discharge Damage and Control. ESD Machine Model Class A ESD Human Body Model Class 0

AMMC-6231 DC Specifications/Physical Properties [1]

Symbol Id qch-b

Parameters and Test Conditions Drain Supply Current under any RF power drive and temperature Vd=3.0 V Thermal Resistance[2] Backside temperature, Tb = 25°C

Units Min. Typ. Max.
60 80
°C/W

AMMC-6231 RF Specifications [3, 4, 5] TA= 25°C, Vd=3.0 V, Id Q =60 mA, Zin=Zo=50 W

Symbol Parameters and Test Conditions

Gain

Small-signal Gain[6]

Noise Figure into 50 W

P-1dB Output Power at 1dB Gain Compression

Units Minimum dB 20 dB

Typical 22
18-28 GHz = 28-32 GHz =
Ordering Information AMMC-6231-W10 = 10 devices per tray AMMC-6231-W50 = 50 devices per tray

Gold Plated Shim Optional

For product information and a complete list of distributors, please go to our web site:

Avago, Avago Technologies, and the A logo are trademarks of Avago Technologies Limited in the United States and other countries. Data subject to change. Copyright 2005-2008 Avago Technologies Limited. All rights reserved. Obsoletes 5989-3942EN AV02-1288EN - June 23, 2008

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived AMMC-6231-W10 Datasheet file may be downloaded here without warranties.

Datasheet ID: AMMC-6231-W10 520110