IND-10565A

IND-10565A Datasheet

WIND BACK & FORTH IN 5 LAYERS.

Part	Datasheet
IND-10565A	IND-10565A (pdf)

PDF Datasheet Preview
NOMINAL NOMINAL SIDE VIEW APPLY LABEL ON SIDE OF HEADER END VIEW DIA 4X TOP VIEW REL. INITIAL RELEASE RELEASE HISTORY SCHEMATIC 1 L= 1.2mH Lo= 1.8mH ± 10% I= A WIND BACK & FORTH IN 5 LAYERS. DATE 06/05/2014 APPROVED JJ HEADER LODESTONE PACIFIC VTM254-4 WITH 4 PINS #16 AWG CORE MICROMETALS T200-8/90 MAGNET WIRE 16 HPTZ. EPOXY JB WELD OR APPROVED EQUIVALENT. SOLDER SN96 ELECTRICAL INDUCTANCE 250 mV, 15 KHz 1-2 = mH ± 10% DCR 1-2 = REF EF-1021 Date 08/17/2013 Page 1 of 1 LABEL: MADE BY AMGIS LLC USA INDUCTOR P/N IND-10565A L= mH I= 7.2A DATE CODE-S/N DRAWN APPROVED NAME DF JJ DATE 06/05/2014 06/05/2014 AMGIS LLC, INC PROPRIETARY AND CONFIDENTIAL THIS DRAWING IS THE PROPERTY OF AMGIS LLC, INC. IT IS LOANED WITH THE UNDERSTANDING THAT IT MAY NOT BE REPRODUCED NOR MAY THE INFORMATION CONTAINED HEREIN BE USED FOR MANUFACTURING PURPOSES WITHOUT WRITTEN CONSENT FROM AMGIS LLC, INC UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN INCHES TOLERANCES: FRACTIONS : ± 1/64 ONE PLACE DECIMAL ± TWO PLACE DECIMAL ± THREE PLACE DECIMAL ± DO NOT SCALE DRAWING

PDF Datasheet Preview

NOMINAL

NOMINAL

SIDE VIEW

APPLY LABEL ON SIDE OF HEADER

END VIEW

DIA 4X

TOP VIEW

REL.

INITIAL RELEASE

RELEASE HISTORY

SCHEMATIC
1 L= 1.2mH Lo= 1.8mH ± 10% I= A

WIND BACK & FORTH IN 5 LAYERS.

DATE 06/05/2014

APPROVED JJ

HEADER LODESTONE PACIFIC VTM254-4 WITH 4 PINS #16 AWG

CORE MICROMETALS T200-8/90 MAGNET WIRE 16 HPTZ. EPOXY JB WELD OR APPROVED EQUIVALENT. SOLDER SN96

ELECTRICAL

INDUCTANCE 250 mV, 15 KHz 1-2 = mH ± 10%

DCR 1-2 = REF

EF-1021 Date 08/17/2013 Page 1 of 1

LABEL:

MADE BY AMGIS LLC USA INDUCTOR P/N IND-10565A

L= mH I= 7.2A DATE CODE-S/N

DRAWN APPROVED

NAME DF JJ

DATE 06/05/2014 06/05/2014

AMGIS LLC, INC

PROPRIETARY AND CONFIDENTIAL

THIS DRAWING IS THE PROPERTY OF AMGIS LLC, INC. IT IS LOANED WITH THE UNDERSTANDING THAT IT MAY NOT BE

REPRODUCED NOR MAY THE INFORMATION CONTAINED HEREIN BE USED FOR MANUFACTURING PURPOSES

WITHOUT WRITTEN CONSENT FROM AMGIS LLC, INC

UNLESS OTHERWISE SPECIFIED

DIMENSIONS ARE IN INCHES

TOLERANCES:

FRACTIONS :
± 1/64

ONE PLACE DECIMAL ±

TWO PLACE DECIMAL ±

THREE PLACE DECIMAL ±

DO NOT SCALE DRAWING

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived IND-10565A Datasheet file may be downloaded here without warranties.

Datasheet ID: IND-10565A 515983