232SPS2

232SPS2 Datasheet

232SPS2-0812-1/1

Part	Datasheet
232SPS2	232SPS2 (pdf)

PDF Datasheet Preview
B&B ELECTRONICS 232SPS2-0812-1/1 2002 by B&B Electronics. All rights reserved. Model 232SPS2 Parallel to Serial or Serial to Parallel Converter The 232SPS2 allows uni-directional communication of data from your parallel port to a serial format. Or you can convert data from your serial port to a parallel communication format. The 232SPS2 can be connected directly between your computer and your printer without making any software modifications. A built-in 96-byte buffer prevents data loss. The Serial Port is connected using a female DB-25 connector and supports X-ON/X-OFF control as well as hardware handshaking. The 232SPS2 supports standard baud rates from 1200 to 115.2k with a variety of data formats. The 232SPS2 supports Acknowledge, Busy, and Strobe on the parallel port through a female DB-25 connector. An easy-toaccess 8-position dipswitch allows you to configure the 232SPS2 to match your system requirements. The unit may be port powered using DTR and RTS on the serial port. If the 232SPS2 cannot be powered using the handshake lines, it may be powered externally using +7 to +18 volts DC at 2 milliamps. Power supplies are available through B&B. Model 232PS is recommended NOTE When using an external supply, the supply should be connected only to specifically labeled power inputs power jack, terminal block, etc. . Connecting an external power supply to the handshake lines may damage the unit. Contact technical support for more information on connecting an external power supply to the handshake lines. Port Powered Works with existing software Easy installation Baud rates up to 115.2K 96-byte buffer Use as Serial-to-Parallel or Parallel-to-Serial Converter Size 4.3L x 1.7W x 0.8H in DECLARATION OF CONFORMITY Manufacturer’s Name Manufacturer’s Address: B&B Electronics Manufacturing Company P.O. Box 1040 707 Dayton Road Ottawa, IL 61350 USA 232SPS2 Description: Parallel to Serial Converter Type: Light industrial ITE equipment Application of Council Directive 89/336/EEC Standards: EN 55022 EN 61000-6-1 EN 61000 -4-2, -4-3, -4-4, -4-5, -4-6, -4-8, -4-11 Robert M. Paratore, Director of Engineering PRODUCT INFORMATION International Office 707 Dayton Road PO Box 1040 Ottawa, IL 61350 USA 815-433-5100 Fax 433-5104 European Office Westlink Commercial Park Oranmore Co. Galway Ireland +353 91 792444 Fax +353 91 792445

PDF Datasheet Preview

B&B ELECTRONICS
232SPS2-0812-1/1
2002 by B&B Electronics. All rights reserved.

Model 232SPS2

Parallel to Serial or Serial to Parallel Converter

The 232SPS2 allows uni-directional communication of data from your parallel port to a serial format. Or you can convert data from your serial port to a parallel communication format. The 232SPS2 can be connected directly between your computer and your printer without making any software modifications. A built-in 96-byte buffer prevents data loss.

The Serial Port is connected using a female DB-25 connector and supports X-ON/X-OFF control as well as hardware handshaking. The 232SPS2 supports standard baud rates from 1200 to 115.2k with a variety of data formats. The 232SPS2 supports Acknowledge, Busy, and Strobe on the parallel port through a female DB-25 connector. An easy-toaccess 8-position dipswitch allows you to configure the 232SPS2 to match your system requirements.

The unit may be port powered using DTR and RTS on the serial port. If the 232SPS2 cannot be powered using the handshake lines, it may be powered externally using +7 to +18 volts DC at 2 milliamps. Power supplies are available through B&B. Model 232PS is recommended

NOTE When using an external supply, the supply should be connected only to specifically labeled power inputs power jack, terminal block, etc. . Connecting an external power supply to the handshake lines may damage the unit. Contact technical support for more information on connecting an external power supply to the handshake lines.

Port Powered Works with existing software Easy installation Baud rates up to 115.2K 96-byte buffer Use as Serial-to-Parallel or Parallel-to-Serial Converter Size 4.3L x 1.7W x 0.8H in

DECLARATION OF CONFORMITY

Manufacturer’s Name Manufacturer’s Address:

B&B Electronics Manufacturing Company P.O. Box 1040
707 Dayton Road

Ottawa, IL 61350 USA
232SPS2

Description:

Parallel to Serial Converter

Type:

Light industrial ITE equipment

Application of Council Directive 89/336/EEC

Standards:

EN 55022 EN 61000-6-1 EN 61000 -4-2, -4-3, -4-4, -4-5, -4-6, -4-8, -4-11

Robert M. Paratore, Director of Engineering

PRODUCT INFORMATION

International Office 707 Dayton Road PO Box 1040 Ottawa, IL 61350 USA 815-433-5100 Fax 433-5104 European Office Westlink Commercial Park Oranmore Co. Galway Ireland +353 91 792444 Fax +353 91 792445

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived 232SPS2 Datasheet file may be downloaded here without warranties.

Datasheet ID: 232SPS2 521482