ACS754SCB-050-PFF

ACS754SCB-050-PFF Datasheet


ACS754xCB-050

Part Datasheet
ACS754SCB-050-PFF ACS754SCB-050-PFF ACS754SCB-050-PFF (pdf)
Related Parts Information
ACS754LCB-050-PFF ACS754LCB-050-PFF ACS754LCB-050-PFF
ACS755LCB-050-PFF ACS755LCB-050-PFF ACS755LCB-050-PFF
PDF Datasheet Preview
ACS754xCB-050

Fully Integrated, Hall Effect-Based Linear Current Sensor with High Voltage Isolation and a Low-Resistance Current Conductor

Monolithic Hall IC for high reliability Single +5 V supply 3 kVRMS isolation voltage between terminals 4/5 and
pins 1/2/3 for up to 1 minute 35 kHz bandwidth Automotive temperature range End-of-line factory-trimmed for gain and offset Ultra-low power loss 100 uΩ internal conductor
resistance Ratiometric output from supply voltage Extremely stable output offset voltage Small package size, with easy mounting capability Output proportional to AC and DC currents

Package 5 pin module leadform PFF

The Allegro ACS75x family of current sensors provides economical and precise solutions for current sensing in industrial, automotive, commercial, and communications systems. The device package allows for easy implementation by the customer. Typical applications include motor control, load detection and management, power supplies, and overcurrent fault protection.

The device consists of a precision, low-offset linear Hall sensor circuit with a copper conduction path located near the die. Applied current flowing through this copper conduction path generates a magnetic field which is sensed by the integrated Hall IC and converted into a proportional voltage. Device accuracy is optimized through the close proximity of the magnetic signal to the Hall transducer. A precise, proportional voltage is provided by the low-offset, chopper-stabilized BiCMOS Hall IC, which is programmed for accuracy at the factory.

The output of the device has a positive slope >VCC / 2 when an increasing current flows through the primary copper conduction path from terminal 4 to terminal 5 , which is the path used for current sensing. The internal resistance of this conductive path is typically 100 uΩ, providing low power loss. The thickness of the copper conductor allows survival of the device at up to

Continued on the next
4 IP+
1 VCC

ACS754

GND 2

VIOUT

CBYP µF

CF RF

VOUT

Application The ACS754 outputs an analog signal, VOUT that varies linearly with the uni- or bi-directional AC or DC
primary sensed current, IP , within the range specified. CF is recommended for noise management, with values that
depend on the application.

ACS754xCB-050

Fully Integrated, Hall Effect-Based Linear Current Sensor with High Voltage Isolation and a Low-Resistance Current Conductor

Description continued 5x overcurrent conditions. The terminals of the conductive path are electrically isolated from the sensor leads pins 1 through This allows the ACS75x family of sensors to be used in applications requiring electrical isolation without the use of opto-isolators or other costly isolation techniques.

The device is fully calibrated prior to shipment from the factory. The ACS75x family is lead Pb free. All pins are coated with 100% matte tin, and there is no lead inside the package. The heavy gauge leadframe is made of oxygen-free copper.

Selection Guide

TOP °C

Primary Sensed

Current, IP A

Sensitivity Sens Typ.
mV/A

Package

Terminals

Signal Pins

Packing1

ACS754LCB-050-PFF to 150
±50

ACS754SCB-050-PFF2 to 85
±50

Formed

Formed
More datasheets: AT89C51-24JC | AT89C51-24JI | AT89C51-24PC | AT89C51-24AC | PENT1040B5600F01 | CY7C1370DV25-250AXCT | CY7C1370DV25-250AXC | FFH15S60STU | FDS8333C | ACS754LCB-050-PFF


Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived ACS754SCB-050-PFF Datasheet file may be downloaded here without warranties.

Datasheet ID: ACS754SCB-050-PFF 516110