PENT1040B5600F01

PENT1040B5600F01 Datasheet

PENT1040B

Part	Datasheet
PENT1040B5600F01	PENT1040B5600F01 (pdf)

PDF Datasheet Preview
PENT1040B Universal 40 Watt Pre-IEEE802.3at Compliant High Power PoE Gigabit Injector • 10/100/1000 MbPS Data Rates • Self-contained Injector • 100-250VAC Universal Input • Desktop Style / Non-vented Case • Pre-IEEE802.3at Compliant Detection, Disconnect, and Over Voltage Control Function • Load Diagnostic LED • Over Load Shutdown and Short Circuit Protection • Regulated Output With Low Ripple • Complies with EMI/RFI Regulations • CE Compliant International Safety Standard Approvals Specifications Output Specifications General Specifications Combined Line and Load Voltage Regulation Ripple Transient Response Excluding Cord Protection ±1% 1% Vp-p max. 0.5ms for 50% Load Change Typical Foldback Overcurrent Protection, Short Circuit Protection Input Specifications AC Input Voltage Range Line Frequency AC Input Current Protection 100-250VAC -10%, +6% 47-63Hz 1.0A max. Internal Primary Current Fuse, Inrush Limiting Environmental Specifications Thermal Performance Operating Temperature No Derating, Convectional Cooling Non Vented Case Relative Humidity Non-Condensing Altitude 0° C to 40° C 5% to 95% 0-10,000 feet Topology Dielectric Withstand Spacing Leakage Current Efficiency EMC Information Emissions Harmonic VFF ESD RF EFI EFT Surge CDI CD Voltage Dips CE Hold-up Time Storage Temp Approvals and Standards MTBF Primary-Secondary-Ground Switching-Fixed Frequency Flyback 3000VAC, 4250VDC 500VDC 5mm Primary-Secondary Less than 250 uA min.

PDF Datasheet Preview

PENT1040B

Universal 40 Watt Pre-IEEE802.3at Compliant

High Power PoE Gigabit Injector
• 10/100/1000 MbPS Data Rates
• Self-contained Injector
• 100-250VAC Universal Input
• Desktop Style / Non-vented Case
• Pre-IEEE802.3at Compliant Detection, Disconnect,
and Over Voltage Control Function
• Load Diagnostic LED
• Over Load Shutdown and Short Circuit Protection
• Regulated Output With Low Ripple
• Complies with EMI/RFI Regulations
• CE Compliant

International Safety Standard Approvals

Specifications

Output Specifications

General Specifications

Combined Line and Load Voltage Regulation

Ripple

Transient Response

Excluding Cord

Protection
±1%
1% Vp-p max. 0.5ms for 50% Load Change Typical Foldback Overcurrent Protection, Short Circuit Protection

Input Specifications

AC Input Voltage Range Line Frequency AC Input Current Protection
100-250VAC -10%, +6%
47-63Hz
1.0A max.

Internal Primary Current Fuse, Inrush Limiting

Environmental Specifications

Thermal Performance

Operating Temperature No Derating, Convectional Cooling Non Vented Case

Relative Humidity

Non-Condensing

Altitude
0° C to 40° C
5% to 95% 0-10,000 feet

Topology

Dielectric Withstand

Spacing Leakage Current Efficiency EMC Information Emissions

Harmonic VFF ESD RF EFI EFT Surge CDI CD Voltage Dips CE Hold-up Time Storage Temp Approvals and Standards

MTBF

Primary-Secondary-Ground

Switching-Fixed Frequency Flyback
3000VAC, 4250VDC 500VDC
5mm Primary-Secondary

Less than 250 uA
min.

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived PENT1040B5600F01 Datasheet file may be downloaded here without warranties.

Datasheet ID: PENT1040B5600F01 506463