RV6LAYSA501A

RV6LAYSA501A Datasheet

RV6LAYSA101A 392C2 100 20 YYWW

Part	Datasheet
RV6LAYSA501A	RV6LAYSA501A (pdf)

Related Parts	Information
RV6LAYSA104A	RV6LAYSA104A
RV6LAYSA502A	RV6LAYSA502A
RV6LAYSA504A	RV6LAYSA504A
RV6LAYSA105A	RV6LAYSA105A
RV6LAYSA102A	RV6LAYSA102A
RV6LAYSA252A	RV6LAYSA252A
RV6LAYSA103A	RV6LAYSA103A
RV6LAYSA251A	RV6LAYSA251A
RV6LAYSA253A	RV6LAYSA253A
RV6LAYSA503A	RV6LAYSA503A
392550M9297	392550M9297
RV6LAYSA101A	RV6LAYSA101A

PDF Datasheet Preview
PART NUMBER SEE SHEET-2 TABLE CHG'D BY APPROVED A 0112190 B.M. 2014-08-05 M. MIKE 2 CENTER 3 RIGHT 3X ] TYP MAX ] 1 LEFT L DATE CODE YY IS LAST 2 DIGITS OF YEAR WW IS WEEK NUMBER MARKING SURFACE C [ # D [ # 1/4-32 NEF-2A MOUNTING SURFACE SHOWN WITH SHAFT AT 50% ROTATION B [ # SLOTTED LOCATING PIN #1 45 1/2 LOCATING PIN #2 R.040 ] FROM n 2 PLS OUTSIDE OF LOCATING PINS MAY BE FLAT GENERAL SPECIFICATIONS AND NOTES: SERIES 392 CONDUCTIVE PLASTIC ELEMENT SUPPLIED WITH MOUNTING NUT, LOCKING WASHER AND JAM NUT. NUTS AND WASHER PACKAGED ASSEMBLED OR UNASSEMBLED BASED ON LISTING REFER TO TABLE ON SHEET2 . 1 MARKING INFORMATION SHOWN ON SIDE OF HOUSING. REFER TO TABLE FOR SPECIFIC LISTING MARKING INFORMATION. WEIGHT OF SINGLE CONTROL OUNCE GRAMS] APPROX. VALUES ARE SHOWN IN STANDARD AND METRIC UNITS. METRIC UNITS ARE IN [ IF CONVERSION DIFFERENCE EXISTS, THE STANDARD UNIT PREVAILS. CONTROLS HAVE AN INTERNAL O-RING SHAFT SEAL. UNITS ARE SEALED FOR WAVE SOLDER AND WASH PROCESSING. BUILT IN ACCORDANCE WITH MIL-R-94. 2 DIMENSIONS FOR BODY DIAMETER AND LOCATING PINS DEVIATE FROM MIL-R-94 ELECTRICAL SPECIFICATIONS:

PDF Datasheet Preview

PART NUMBER SEE SHEET-2 TABLE

CHG'D BY

APPROVED

A 0112190

B.M. 2014-08-05 M. MIKE
2 CENTER
3 RIGHT
3X ] TYP

MAX ]
1 LEFT L

DATE CODE YY IS LAST 2 DIGITS

OF YEAR WW IS WEEK NUMBER

MARKING SURFACE

C [ # D [ #
1/4-32 NEF-2A

MOUNTING SURFACE

SHOWN WITH SHAFT

AT 50% ROTATION

B [ # SLOTTED

LOCATING PIN #1
45 1/2

LOCATING PIN #2

R.040 ]

FROM n 2 PLS

OUTSIDE OF LOCATING

PINS MAY BE FLAT

GENERAL SPECIFICATIONS AND NOTES:

SERIES 392

CONDUCTIVE PLASTIC ELEMENT

SUPPLIED WITH MOUNTING NUT, LOCKING WASHER AND JAM NUT.

NUTS AND WASHER PACKAGED ASSEMBLED OR UNASSEMBLED BASED ON LISTING

REFER TO TABLE ON SHEET2 .
1 MARKING INFORMATION SHOWN ON SIDE OF HOUSING.

REFER TO TABLE FOR SPECIFIC LISTING MARKING INFORMATION.

WEIGHT OF SINGLE CONTROL OUNCE GRAMS] APPROX.

VALUES ARE SHOWN IN STANDARD AND METRIC UNITS. METRIC UNITS ARE IN [

IF CONVERSION DIFFERENCE EXISTS, THE STANDARD UNIT PREVAILS.

CONTROLS HAVE AN INTERNAL O-RING SHAFT SEAL.

UNITS ARE SEALED FOR WAVE SOLDER AND WASH PROCESSING.

BUILT IN ACCORDANCE WITH MIL-R-94. 2 DIMENSIONS FOR BODY DIAMETER AND LOCATING PINS DEVIATE FROM MIL-R-94

ELECTRICAL SPECIFICATIONS:

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived RV6LAYSA501A Datasheet file may be downloaded here without warranties.

Datasheet ID: RV6LAYSA501A 636368