04-6040-0000

04-6040-0000 Datasheet

Part	Datasheet
04-6040-0000	04-6040-0000 (pdf)

Related Parts	Information
04-7012-0000	04-7012-0000
04-6337-0000	04-6337-0000

PDF Datasheet Preview
E-Bar Oxide Free Extruded Bar Solder Lead-bearing and Lead-free alloys Product Description Complicated electronic assemblies and printed circuit boards require not only conformance to industry material specifications, but also alloys completely free of non-metallic oxides. Kester, in cooperation with the electronics industry, designed and developed Kester E-Bar. It is the answer to thorough metallic continuity, increased fluidity, and reduced surface tension. Electronic assembly engineers, who have depended on Kester for answers to their soldering problems throughout the years, now are assured of the highest quality soldering of printed circuit boards and electronic assemblies. Maximum Allowed Impurities Kester E-Bar substantially exceeds the requirements of current industry standards for allowable impurity requirements. Element J-STD-006 Kester E-Bar Kester Ultra Low Dross Copper Gold Antimony Cadmium Zinc Aluminum Iron Arsenic Bismuth Silver Nickel Indium Lead Kester bar solder will conform to these requirements when purchased directly or through stocking distributors. Only the highest purity virgin metals are used to make Kester E-Bar. Kester is the only manufacturer of E-Bar quality solder. Kester E-Bar meets or exceeds Industry Specification ASTM B32. Kester E-Bar conforms to the requirements of J-STD-006 formerly QQ-S-571F. DOD-STD-2000-1A Soldering Technology, High Quality/High Reliability states that it is the responsibility of the manufacturer to select those materials and processes that will produce acceptable high quality/high reliability products. E-Bar Available Alloys Lead-bearing Sn63Pb37 Sn60Pb40 Lead-free Sn95Sb05 Sn96.5Ag3.5 Sn96.5Ag3.0Cu0.5 Sn95.5Ag3.8Cu0.7 Sn99.3Cu0.7 Sn100 Melting Point 183°C 361°F 183-190°C 361-374°F 232-240°C 450-464°F 221°C 430°F 217-220°C 423-428°F 217-221°C 423-430°F 227°C 441°F 232°C 450°F Storage and Shelf Life Kester E-Bar has no limited shelf life when handled properly. Storage must be in a dry, non-corrosive environment. The solder surface may lose its shine and appear a dull shade of gray. This is a surface phenomenon and is not detrimental to product functionality. Health & Safety This product, during handling or use, may be hazardous to health or the environment. Read the Material Safety Data Sheet and warning label before using this product. World Headquarters 800 West Thorndale Avenue, Itasca, Illinois, 60143 USA Phone +1 847-297-1600 • Email • Website: Asia Pacific Headquarters 500 Chai Chee Lane Singapore 469024 +65 6449-1133 European Headquarters Zum Plom 5 08541 Neuensalz Germany

PDF Datasheet Preview

E-Bar Oxide Free Extruded Bar Solder

Lead-bearing and Lead-free alloys

Product Description

Complicated electronic assemblies and printed circuit boards require not only conformance to industry material specifications, but also alloys completely free of non-metallic oxides. Kester, in cooperation with the electronics industry, designed and developed Kester E-Bar. It is the answer to thorough metallic continuity, increased fluidity, and reduced surface tension. Electronic assembly engineers, who have depended on Kester for answers to their soldering problems throughout the years, now are assured of the highest quality soldering of printed circuit boards and electronic assemblies.

Maximum Allowed Impurities

Kester E-Bar substantially exceeds the requirements of current industry standards for allowable impurity
requirements.

Element

J-STD-006

Kester E-Bar

Kester

Ultra Low Dross

Copper

Gold

Antimony

Cadmium

Zinc

Aluminum

Iron

Arsenic

Bismuth

Silver

Nickel

Indium

Lead

Kester bar solder will conform to these requirements when purchased directly or through stocking distributors. Only the highest purity virgin metals are used to make Kester E-Bar. Kester is the only manufacturer of E-Bar quality solder. Kester E-Bar meets or exceeds Industry Specification ASTM B32. Kester E-Bar conforms to the requirements of J-STD-006 formerly QQ-S-571F. DOD-STD-2000-1A Soldering Technology, High Quality/High Reliability states that it is the responsibility of the manufacturer to select those materials and processes that will produce acceptable high quality/high reliability products.

E-Bar

Available Alloys

Lead-bearing Sn63Pb37 Sn60Pb40

Lead-free Sn95Sb05 Sn96.5Ag3.5 Sn96.5Ag3.0Cu0.5 Sn95.5Ag3.8Cu0.7 Sn99.3Cu0.7 Sn100

Melting Point
183°C 361°F 183-190°C 361-374°F
232-240°C 450-464°F 221°C 430°F
217-220°C 423-428°F 217-221°C 423-430°F
227°C 441°F 232°C 450°F

Storage and Shelf Life Kester E-Bar has no limited shelf life when handled properly. Storage must be in a dry, non-corrosive environment. The solder surface may lose its shine and appear a dull shade of gray. This is a surface phenomenon and is not detrimental to product functionality.

Health & Safety This product, during handling or use, may be hazardous to health or the environment. Read the Material Safety Data Sheet and warning label before using this product.

World Headquarters 800 West Thorndale Avenue, Itasca, Illinois, 60143 USA Phone +1 847-297-1600
• Email
• Website:

Asia Pacific Headquarters 500 Chai Chee Lane Singapore 469024 +65 6449-1133

European Headquarters Zum Plom 5
08541 Neuensalz Germany

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived 04-6040-0000 Datasheet file may be downloaded here without warranties.

Datasheet ID: 04-6040-0000 644831