ZTX749A_D26Z

ZTX749A_D26Z Datasheet

ZTX749A

Part	Datasheet
ZTX749A_D26Z	ZTX749A_D26Z (pdf)

Related Parts	Information
ZTX749A	ZTX749A
ZTX749A_J05Z	ZTX749A_J05Z
ZTX749A_J61Z	ZTX749A_J61Z

PDF Datasheet Preview
ZTX749A ZTX749A PNP Low Saturation Transistor • This device are designed with high current gain and low saturation voltage with collector currents up to 2A continuous. TO-226 Absolute Maximum Ratings TA=25°C unless otherwise noted Parameter Value VCEO Collector-Emitter Voltage VCBO Collector-Base Voltage VEBO Emitter-Base Voltage Collector Current - Continuous TJ, TSTG Operating and Storage Junction Temperature Range -55 ~ +150 * These ratings are limiting values above which the serviceability of any semiconductor device may be impaired. NOTES These ratings are based on a maximum junction temperature of 150°C. These are steady state limits. The factory should be consulted on applications involving pulsed or low duty cycle operations. Electrical Characteristics TA=25°C unless otherwise noted Parameter Test Condition Min. Off Characteristics BVCEO Collector-Emitter Breakdown Voltage IC = -10mA BVCBO Collector-Base Breakdown Voltage IC = -100µA BVEBO Emitter-Base Breakdown Voltage IE = -100µA ICBO Collector Cutoff Current VCB = -30V VCB = -30V, TA = 100°C IEBO Emitter Cutoff Current VEB = -4V For leadformed option ordering, refer to Tape & Reel data information. 2003 Fairchild Semiconductor Corporation Dimensions in Millimeters TRADEMARKS The following are registered and unregistered trademarks Fairchild Semiconductor owns or is authorized to use and is not intended to be an exhaustive list of all such trademarks. ACEx FACT ActiveArray Bottomless FACT Quiet Series CoolFET FASTr CROSSVOLT FRFET DOME GlobalOptoisolator EcoSPARK GTO E2CMOS HiSeC EnSigna Across the board. Around the world. The Power Franchise Programmable Active Droop ImpliedDisconnect ISOPLANAR LittleFET MicroFET MicroPak MICROWIRE MSX MSXPro OCX OCXPro OPTOPLANAR PACMAN Power247 QT Optoelectronics Quiet Series RapidConfigure RapidConnect SILENT SMART START SPM Stealth SuperSOT -3 SuperSOT -6 SuperSOT -8 SyncFET TruTranslation UHC VCX DISCLAIMER FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS. LIFE SUPPORT POLICY FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: Life support devices or systems are devices or systems which, a are intended for surgical implant into the body, or b support or sustain life, or c whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in significant injury to the user. A critical component is any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. PRODUCT STATUS DEFINITIONS Definition of Terms Datasheet Identification Advance Information Preliminary No Identification Needed Product Status Formative or In Design First Production Full Production

PDF Datasheet Preview

ZTX749A

ZTX749A

PNP Low Saturation Transistor
• This device are designed with high current gain and low saturation voltage with collector currents up to 2A continuous.

TO-226

Absolute Maximum Ratings TA=25°C unless otherwise noted

Parameter

Value

VCEO

Collector-Emitter Voltage

VCBO

Collector-Base Voltage

VEBO

Emitter-Base Voltage

Collector Current
- Continuous

TJ, TSTG

Operating and Storage Junction Temperature Range
-55 ~ +150
* These ratings are limiting values above which the serviceability of any semiconductor device may be impaired.

NOTES These ratings are based on a maximum junction temperature of 150°C. These are steady state limits. The factory should be consulted on applications involving pulsed or low duty cycle operations.

Electrical Characteristics TA=25°C unless otherwise noted

Parameter

Test Condition

Min.

Off Characteristics

BVCEO

Collector-Emitter Breakdown Voltage

IC = -10mA

BVCBO

Collector-Base Breakdown Voltage

IC = -100µA

BVEBO

Emitter-Base Breakdown Voltage

IE = -100µA

ICBO

Collector Cutoff Current

VCB = -30V VCB = -30V, TA = 100°C

IEBO

Emitter Cutoff Current

VEB = -4V
For leadformed option ordering, refer to Tape & Reel data information.
2003 Fairchild Semiconductor Corporation

Dimensions in Millimeters

TRADEMARKS

The following are registered and unregistered trademarks Fairchild Semiconductor owns or is authorized to use and is not intended to be an exhaustive list of all such trademarks.

ACEx

FACT

ActiveArray Bottomless

FACT Quiet Series

CoolFET

FASTr

CROSSVOLT FRFET

DOME

GlobalOptoisolator

EcoSPARK GTO

E2CMOS

HiSeC

EnSigna

Across the board. Around the world.

The Power Franchise

Programmable Active Droop

ImpliedDisconnect ISOPLANAR LittleFET MicroFET MicroPak MICROWIRE MSX MSXPro OCX OCXPro OPTOPLANAR

PACMAN

Power247

QT Optoelectronics

Quiet Series

RapidConfigure

RapidConnect SILENT

SMART START

SPM Stealth SuperSOT -3 SuperSOT -6 SuperSOT -8 SyncFET TruTranslation UHC VCX

DISCLAIMER

FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS.

LIFE SUPPORT POLICY

FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein:

Life support devices or systems are devices or systems which, a are intended for surgical implant into the body, or b support or sustain life, or c whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in significant injury to the user.

A critical component is any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness.

PRODUCT STATUS DEFINITIONS Definition of Terms

Datasheet Identification Advance Information Preliminary

No Identification Needed

Product Status Formative or In Design First Production

Full Production

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived ZTX749A_D26Z Datasheet file may be downloaded here without warranties.

Datasheet ID: ZTX749A_D26Z 634823