PEB22504HT-V11

PEB22504HT-V11 Datasheet

QuadLIU Quad Line Interface Unit for PEB 22504 Version

Part	Datasheet
PEB22504HT-V11	PEB22504HT-V11 (pdf)

PDF Datasheet Preview
Data Sheet, DS4, February 2001 QuadLIU Quad Line Interface Unit for PEB 22504 Version Datacom Never stop thinking. Edition 2001-02 Published by Infineon Technologies AG, St.-Martin-Strasse 53, D-81669 München, Germany Infineon Technologies AG All Rights Reserved. Attention please! The information herein is given to describe certain components and shall not be considered as warranted characteristics. Terms of delivery and rights to technical change reserved. We hereby disclaim any and all warranties, including but not limited to warranties of non-infringement, regarding circuits, descriptions and charts stated herein. Infineon Technologies is an approved CECC manufacturer. Information For further information on technology, delivery terms and conditions and prices please contact your nearest Infineon Technologies Office in Germany or our Infineon Technologies Representatives worldwide see address list . Warnings Due to technical requirements components may contain dangerous substances. For information on the types in question please contact your nearest Infineon Technologies Office. Infineon Technologies Components may only be used in life-support devices or systems with the express written approval of Infineon Technologies, if a failure of such components can reasonably be expected to cause the failure of that life-support device or system, or to affect the safety or effectiveness of that device or system. Life support devices or systems are intended to be implanted in the human body, or to support and/or maintain and sustain and/or protect human life. If they fail, it is reasonable to assume that the health of the user or other persons may be endangered. Data Sheet, DS4, February 2001 QuadLIU Quad Line Interface Unit for PEB 22504 Version Datacom Never stop thinking. PEB 22504 2001-02 Previous Version: Data Sheet, DS3, 2000-09 5 V supply mode is not supported e-mail address changed Global Configuration Register Power Supply Range External Line Frontend Calculator Transmiter output current Receiver sensitivity For questions on technology, delivery, and prices please contact the Infineon Technologies Offices in Germany or the Infineon Technologies Companies and Representatives worldwide see our webpage at PEB 22504 QuadLIU V1.1 The Quad Line Interface Unit PEB 22504 QuadLIU is a flexible line interface unit for a wide area of telecommunication and data communication applications. The device contains four complete channels on one chip to save board space and power consumption. This document provides complete reference information to configure E1, T1, and J1 applications. Organization of this Document This Data Sheet is organized as follows • Chapter 1, Overview Gives a general description of the product and its family, lists the key features, and presents some typical applications. • Chapter 2, Pin Descriptions Lists pin locations with associated signals, categorizes signals according to function, and describes signals. • Chapter 3, Functional Description This chapter describes the functional blocks and principal operation modes. • Chapter 4, Interface Description Describes the various device interfaces. • Chapter 5, Operational Description Shows the operation modes and how they are to be initialized. • Chapter 6, Register Description Gives a detailed description of all implemented registers and how to use them in different applications/configurations. • Chapter 7, Electrical Characteristics Specifies maximum ratings, DC and AC characteristics. • Chapter 8, Package Outlines Shows the mechanical values of the device package.

PDF Datasheet Preview

Data Sheet, DS4, February 2001

QuadLIU Quad Line Interface Unit for PEB 22504 Version

Datacom

Never stop thinking.

Edition 2001-02

Published by Infineon Technologies AG, St.-Martin-Strasse 53, D-81669 München, Germany

Infineon Technologies AG

All Rights Reserved.

Attention please!

The information herein is given to describe certain components and shall not be considered as warranted characteristics. Terms of delivery and rights to technical change reserved. We hereby disclaim any and all warranties, including but not limited to warranties of non-infringement, regarding circuits, descriptions and charts stated herein. Infineon Technologies is an approved CECC manufacturer.

Information

For further information on technology, delivery terms and conditions and prices please contact your nearest Infineon Technologies Office in Germany or our Infineon Technologies Representatives worldwide see address list .

Warnings

Due to technical requirements components may contain dangerous substances. For information on the types in question please contact your nearest Infineon Technologies Office. Infineon Technologies Components may only be used in life-support devices or systems with the express written approval of Infineon Technologies, if a failure of such components can reasonably be expected to cause the failure of that life-support device or system, or to affect the safety or effectiveness of that device or system. Life support devices or systems are intended to be implanted in the human body, or to support and/or maintain and sustain and/or protect human life. If they fail, it is reasonable to assume that the health of the user or other persons may be endangered.

Data Sheet, DS4, February 2001

QuadLIU Quad Line Interface Unit for PEB 22504 Version

Datacom

Never stop thinking.

PEB 22504
2001-02

Previous Version:

Data Sheet, DS3, 2000-09
5 V supply mode is not supported
e-mail address changed

Global Configuration Register

Power Supply Range

External Line Frontend Calculator

Transmiter output current

Receiver sensitivity

For questions on technology, delivery, and prices please contact the Infineon Technologies Offices in Germany or the Infineon Technologies Companies and Representatives worldwide see our webpage at

PEB 22504 QuadLIU V1.1

The Quad Line Interface Unit PEB 22504 QuadLIU is a flexible line interface unit for a wide area of telecommunication and data communication applications. The device contains four complete channels on one chip to save board space and power consumption. This document provides complete reference information to configure E1, T1, and J1 applications.

Organization of this Document This Data Sheet is organized as follows
• Chapter 1, Overview

Gives a general description of the product and its family, lists the key features, and presents some typical applications.
• Chapter 2, Pin Descriptions Lists pin locations with associated signals, categorizes signals according to function, and describes signals.
• Chapter 3, Functional Description This chapter describes the functional blocks and principal operation modes.
• Chapter 4, Interface Description Describes the various device interfaces.
• Chapter 5, Operational Description Shows the operation modes and how they are to be initialized.
• Chapter 6, Register Description Gives a detailed description of all implemented registers and how to use them in different applications/configurations.
• Chapter 7, Electrical Characteristics Specifies maximum ratings, DC and AC characteristics.
• Chapter 8, Package Outlines Shows the mechanical values of the device package.

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived PEB22504HT-V11 Datasheet file may be downloaded here without warranties.

Datasheet ID: PEB22504HT-V11 638405