F5E3

F5E3 Datasheet

F5E1/2/3

Part	Datasheet
F5E3	F5E3 (pdf)

Related Parts	Information
F5E2	F5E2
F5E1	F5E1

PDF Datasheet Preview
F5E1/2/3 AlGaAs INFRARED EMITTING DIODE PACKAGE DIMENSIONS The F5E series are 880nm LEDs in a wide angle, TO-46 package. ANODE CASE • Good optical to mechanical alignment • Mechanically and wavelength matched to the TO-18 series phototransistor • Hermetically sealed package • High irradiance level SCHEMATIC ANODE Connected To Case CATHODE 13 45° Dimensions for all drawings are in inches mm . Tolerance of ± on all non-nominal dimensions unless otherwise specified. Derate power dissipation linearly mW/°C above 25°C ambient. Derate power dissipation linearly mW/°C above 25°C case. RMA flux is recommended. Methanol or isopropyl alcohols are recommended as cleaning agents. Soldering iron tip 1/16” 1.6mm minimum from housing. As long as leads are not under any stress or spring tension Total power output, PO, is the total power radiated by the device into a solid angle of 2 ! steradians. ABSOLUTE MAXIMUM RATINGS TA = 25°C unless otherwise specified TOPR TSTG TSOL-I TSOL-F IF VR PD Rating -65 to +125 -65 to +150 240 for 5 sec 260 for 10 sec 100 3 10 3 Unit °C °C °C °C mA A V mW W ELECTRICAL / OPTICAL CHARACTERISTICS TA =25°C All measurements made under pulse conditions TEST CONDITIONS IF = 100 mA IF = 100 mA VR = 3 V IF = 100 mA IF = 100 mA IF = 100 mA ±40 UNITS nm Deg. V µA mW µs µs 2001 Fairchild Semiconductor Corporation DS300287 4/25/01 1 OF 3 F5E1/2/3 AlGaAs INFRARED EMITTING DIODE Figure Power Output vs. Input Current 10 PO, NORMALIZED POWER CURRENT PO, NORMALIZED POWER OUTPUT NORMALIZED TO IF = 100 mA TA = 25°C PULSED INPUTS PW = 80 µsec RR = 30 Hz 1000 IF, INPUT CURRENT mA

PDF Datasheet Preview

F5E1/2/3

AlGaAs INFRARED EMITTING DIODE

PACKAGE DIMENSIONS

The F5E series are 880nm LEDs in a wide angle, TO-46 package.

ANODE CASE
• Good optical to mechanical alignment
• Mechanically and wavelength matched
to the TO-18 series phototransistor
• Hermetically sealed package
• High irradiance level

SCHEMATIC

ANODE

Connected

To Case

CATHODE
13 45°

Dimensions for all drawings are in inches mm . Tolerance of ± on all non-nominal dimensions
unless otherwise specified.

Derate power dissipation linearly mW/°C above 25°C ambient. Derate power dissipation linearly mW/°C above 25°C case. RMA flux is recommended. Methanol or isopropyl alcohols are recommended as cleaning
agents. Soldering iron tip 1/16” 1.6mm minimum from housing. As long as leads are not under any stress or spring tension Total power output, PO, is the total power radiated by the device into
a solid angle of 2 ! steradians.

ABSOLUTE MAXIMUM RATINGS TA = 25°C unless otherwise specified

TOPR TSTG TSOL-I TSOL-F

IF VR PD

Rating -65 to +125 -65 to +150 240 for 5 sec 260 for 10 sec
100 3 10 3

Unit °C °C °C °C mA A V mW W

ELECTRICAL / OPTICAL CHARACTERISTICS TA =25°C All measurements made under pulse conditions

TEST CONDITIONS IF = 100 mA

IF = 100 mA VR = 3 V

IF = 100 mA IF = 100 mA IF = 100 mA
±40

UNITS nm Deg. V µA mW µs µs
2001 Fairchild Semiconductor Corporation DS300287 4/25/01
1 OF 3

F5E1/2/3

AlGaAs INFRARED EMITTING DIODE

Figure Power Output vs. Input Current 10

PO, NORMALIZED POWER CURRENT

PO, NORMALIZED POWER OUTPUT

NORMALIZED TO IF = 100 mA TA = 25°C

PULSED INPUTS PW = 80 µsec RR = 30 Hz
1000

IF, INPUT CURRENT mA

More datasheets: B88069X2450T702 | 15018 | AOD4158P | FJN4307RTA | FJN4307RBU | 12002 | SC009221 | HMC413QS16G | F5E2 | F5E1

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived F5E3 Datasheet file may be downloaded here without warranties.

F5E3

F5E3 Datasheet

Datasheet ID: F5E3 513857