SVF332R3K1CKU2

SVF332R3K1CKU2 Datasheet

Part Number SVF311R3K1CKU2 SVF312R3K1CKU2 SVF321R3K1CKU2 SVF322R3K1CKU2

Part	Datasheet
SVF332R3K1CKU2	SVF332R3K1CKU2 (pdf)

Related Parts	Information
SVF531R3K1CMK4	SVF531R3K1CMK4
SVF532R2K1CMK4	SVF532R2K1CMK4
SVF331R3K1CKU2	SVF331R3K1CKU2

PDF Datasheet Preview
Freescale Semiconductor Data Sheet Technical Data VF3xxR, VF5xxR • Operating characteristics Voltage range 3 V to V Temperature range ambient -40 °C to 85 °C • A5 Core features Up to 400 MHz A5 core 32 KB/32 KB I/D L1 Cache DMIPS/MHz based on ARMv7 architecture NEON MPE Media Processing Engine Coprocessor Double Precision Floating Point Unit 512 KB L2 cache on selected part numbers only • ARM Cortex M4 Core features Up to 133 MHz ARM Cortex M4 Integrated DSP capability 64 KB Tightly Coupled Memory TCM 16 KB/16 KB I/D L1 Cache DMIPS/MHz based on ARMv7 architecture • Clocks 24 MHz crystal oscillator 32 kHz crystal oscillator Internal reference clocks 128 KHz and 24 MHz Phase Locked Loops PLLs Low Jitter Digital PLLs • System debug, protection, and power management Various stop, wait, and run modes to provide low power based on application needs Peripheral clock enable register can disable clocks to unused modules, thereby reducing currents Low voltage warning and detect with selectable trip points Illegal opcode and illegal address detection with programmable reset or processor exception response Hardware CRC module to support fast cyclic redundancy checks CRC 128-bit unique chip identifier Hardware watchdog External Watchdog Monitor EWM Dual DMA controller with 32 channels with DMAMUX VYBRIDRSERIESEC • Debug Standard JTAG 16-bit Trace port • Timers Motor control/general purpose timer FTM Periodic Interrupt Timers PITs Low-power timer LPTMR0 IEEE 1588 Timer per MAC interface part of Ethernet Subsystem • Communications Six Universal asynchronous receivers/transmitters UART /Serial communications interface SCI with LIN, ISO7816, IrDA, and hardware flow control Four Deserial Serial peripheral interface DSPI Four Inter-Integrated Circuit I2C with SMBUS support Dual USB OTG Controller + PHY Dual 4/8 bit Secure Digital Host controller Local Media Bus MLB50 Dual 10/100 Ethernet IEEE 1588 Dual FlexCAN3 • Security ARM TrustZone including the TZ architecture Secure Non-Volatile Storage SNVS Real Time Clock Real Time Integrity Checker RTIC TrustZone Watchdog TZ WDOG Trust Zone Address Space Controller Random Number Generator Hashing Secure JTAG • Memory Interfaces 8/16-bit DRAM Controller with support for LPDDR2/DDR3 - Up to 400 MHz ECC supported for 8-bit only and not 16-bit 8/16-bit NAND Flash controller with ECC supported for 8-bit only and not 16-bit Dual Quad SPI with XIP Execute-In-Place 8/16/32-bit External bus Flexbus Freescale reserves the right to change the detail specifications as may be required to permit improvements in the design of its products. Freescale Semiconductor, Inc. • Display and Video Dual Display Control Unit DCU with support for color TFT display up to WVGA Segmented LCD 3V Glass only configurable as 40x4, 38x8, and 36x6 Video Interface Unit VIU for camera Open VG Graphics Processing Unit GPU VideoADC • Analog Dual 12-bit SAR ADC with 1MS/s Dual 12-bit DAC • Audio Four Synchronous Audio Interface SAI Enhanced Serial Audio Interface ESAI Sony Philips Digital Interface SPDIF , Rx and Tx Asynchronous Sample Rate Converter ASRC • Human-Machine Interface HMI GPIO pins with interrupt support, DMA request capability, digital glitch filter. Hysteresis and configurable pull up/down device on all input pins Configurable slew rate and drive strength on all output pins • On-Chip Memory 512 KB On-chip SRAM with ECC 1 MB On-chip graphics SRAM no ECC . This depends on the part selected. Alternate configuration could be 512 KB graphics and 512 KB L2 cache. 96 KB Boot ROM Freescale Semiconductor, Inc. Table of Contents 1 Ordering USB PHY current Determining valid orderable parts Power Down Mode............................. 21 2 Part 5 EMC radiated emissions operating behaviors........ 21 EMC Radiated Emissions Web Search Procedure Capacitance 22 Part Numbers 7 I/O 3 Terminology and GPIO 22 Definition Operating 8 Output Buffer Impedance measurement................. 24 Definition Operating 8 Definition: 8 Power supplies and Definition: Power sequencing Result of exceeding a 9 Power 30 Relationship between ratings and operating requirements......10 Absolute maximum 31 Guidelines for ratings and operating requirements................. 10 Recommended operating 32 Definition Typical 10 Recommended Connections for Unused Analog Interfaces... 33 Typical Value 9 Peripheral operating requirements and behaviours............................ 34 4 Handling 12 ESD handling ratings 12 12-bit ADC electrical characteristics...................... 34 Thermal handling 12 12-bit ADC operating conditions........ 34 Moisture handling 12-bit ADC characteristics..................35 5 Operating 12-bit DAC electrical characteristics...................... 39 Thermal operating 13 12-bit DAC operating requirements....39 12-bit DAC operating behaviors......... 39 Ordering parts 1 Ordering parts Determining valid orderable parts Valid orderable part numbers are provided on the web. To determine the orderable part numbers for this device, go to and search the required part number. The part numbering format is described in the section that follows. 2 Part identification Part numbers for the chip have fields that identify the specific part. You can use the values of these fields to determine the specific part you have received. Part Number Format The figure below represents the format of part number of this device. Freescale Semiconductor, Inc. Part identification S V F 3 1 R 3 K1 C MK 2 R Qualification Status P = engineering samples S = automotive qualified Tape & Reel R = Tape & Reel Optional Brand V = Vybrid Series F = current Family 3 = Standard 5 = Advanced Graphics 1 = No Open VG 2 = Open VG Core 1 = Cortex A5 2 = Cortex A5 + M4 3 = M4 Primary Version R = Auto Speed A5 core 2 = 266MHz 4 = 400MHz Package KU = 176LQFP MK = 364BGA Temp Spec C = -40 to +85C Ta Option K1 = Placeholder Memory Option 3 = Standard 1.5MB SRAM 2 = Optional 1MB SRAM and 512K L2 Cache Figure Part Number Format Fields This table lists the possible values for each field in the part number not all combinations are valid : Field Q B S F C Description Qualification status Brand Series Family Core Graphics Version Table continues on the next page... Values • P = engineering samples • S = automotive qualified • V = Vybrid • F = current • 3 = Standard • 5 = Advanced • 1 = Cortex A5 • 2 = Cortex A5 + M4 • 3 = M4 Primary • 1 = No Open VG • 2 = OpenVG • R = Auto Freescale Semiconductor, Inc. Field M Description Memory option

PDF Datasheet Preview

Freescale Semiconductor Data Sheet Technical Data

VF3xxR, VF5xxR
• Operating characteristics Voltage range 3 V to V Temperature range ambient -40 °C to 85 °C
• A5 Core features Up to 400 MHz A5 core 32 KB/32 KB I/D L1 Cache DMIPS/MHz based on ARMv7 architecture NEON MPE Media Processing Engine Coprocessor Double Precision Floating Point Unit 512 KB L2 cache on selected part numbers only
• ARM Cortex M4 Core features Up to 133 MHz ARM Cortex M4 Integrated DSP capability 64 KB Tightly Coupled Memory TCM 16 KB/16 KB I/D L1 Cache DMIPS/MHz based on ARMv7 architecture
• Clocks 24 MHz crystal oscillator 32 kHz crystal oscillator Internal reference clocks 128 KHz and 24 MHz Phase Locked Loops PLLs Low Jitter Digital PLLs
• System debug, protection, and power management Various stop, wait, and run modes to provide low power based on application needs Peripheral clock enable register can disable clocks to unused modules, thereby reducing currents Low voltage warning and detect with selectable trip points Illegal opcode and illegal address detection with programmable reset or processor exception response Hardware CRC module to support fast cyclic redundancy checks CRC 128-bit unique chip identifier Hardware watchdog External Watchdog Monitor EWM Dual DMA controller with 32 channels with DMAMUX

VYBRIDRSERIESEC
• Debug Standard JTAG 16-bit Trace port
• Timers Motor control/general purpose timer FTM Periodic Interrupt Timers PITs Low-power timer LPTMR0 IEEE 1588 Timer per MAC interface part of Ethernet Subsystem
• Communications Six Universal asynchronous receivers/transmitters UART /Serial communications interface SCI with LIN, ISO7816, IrDA, and hardware flow control Four Deserial Serial peripheral interface DSPI Four Inter-Integrated Circuit I2C with SMBUS support Dual USB OTG Controller + PHY Dual 4/8 bit Secure Digital Host controller Local Media Bus MLB50 Dual 10/100 Ethernet IEEE 1588 Dual FlexCAN3
• Security ARM TrustZone including the TZ architecture Secure Non-Volatile Storage SNVS Real Time Clock Real Time Integrity Checker RTIC TrustZone Watchdog TZ WDOG Trust Zone Address Space Controller Random Number Generator Hashing Secure JTAG
• Memory Interfaces 8/16-bit DRAM Controller with support for LPDDR2/DDR3 - Up to 400 MHz ECC supported for 8-bit only and not 16-bit 8/16-bit NAND Flash controller with ECC supported for 8-bit only and not 16-bit Dual Quad SPI with XIP Execute-In-Place 8/16/32-bit External bus Flexbus

Freescale reserves the right to change the detail specifications as may be required to permit improvements in the design of its products.

Freescale Semiconductor, Inc.
• Display and Video Dual Display Control Unit DCU with support for color TFT display up to WVGA Segmented LCD 3V Glass only configurable as 40x4, 38x8, and 36x6 Video Interface Unit VIU for camera Open VG Graphics Processing Unit GPU VideoADC
• Analog Dual 12-bit SAR ADC with 1MS/s Dual 12-bit DAC
• Audio Four Synchronous Audio Interface SAI Enhanced Serial Audio Interface ESAI Sony Philips Digital Interface SPDIF , Rx and Tx Asynchronous Sample Rate Converter ASRC
• Human-Machine Interface HMI GPIO pins with interrupt support, DMA request capability, digital glitch filter. Hysteresis and configurable pull up/down device on all input pins Configurable slew rate and drive strength on all output pins
• On-Chip Memory 512 KB On-chip SRAM with ECC 1 MB On-chip graphics SRAM no ECC . This depends on the part selected. Alternate configuration could be 512 KB graphics and 512 KB L2 cache. 96 KB Boot ROM

Freescale Semiconductor, Inc.

Table of Contents
1 Ordering

USB PHY current

Determining valid orderable parts

Power Down Mode............................. 21
2 Part 5

EMC radiated emissions operating behaviors........ 21

EMC Radiated Emissions Web Search Procedure

Capacitance 22

Part Numbers
7 I/O
3 Terminology and

GPIO 22

Definition Operating 8

Output Buffer Impedance measurement................. 24

Definition Operating 8

Definition:
8 Power supplies and

Definition:

Power sequencing

Result of exceeding a 9

Power 30

Relationship between ratings and operating requirements......10

Absolute maximum 31

Guidelines for ratings and operating requirements................. 10

Recommended operating 32

Definition Typical 10

Recommended Connections for Unused Analog Interfaces... 33

Typical Value
9 Peripheral operating requirements and behaviours............................ 34
4 Handling 12

ESD handling ratings 12
12-bit ADC electrical characteristics...................... 34

Thermal handling 12
12-bit ADC operating conditions........ 34

Moisture handling
12-bit ADC characteristics..................35
5 Operating
12-bit DAC electrical characteristics...................... 39

Thermal operating 13
12-bit DAC operating requirements....39
12-bit DAC operating behaviors......... 39
Ordering parts
1 Ordering parts

Determining valid orderable parts

Valid orderable part numbers are provided on the web. To determine the orderable part numbers for this device, go to and search the required part number. The part numbering format is described in the section that follows.
2 Part identification

Part numbers for the chip have fields that identify the specific part. You can use the values of these fields to determine the specific part you have received.

Part Number Format

The figure below represents the format of part number of this device.

Freescale Semiconductor, Inc.

Part identification

S V F 3 1 R 3 K1 C MK 2 R

Qualification Status P = engineering samples S = automotive qualified

Tape & Reel R = Tape & Reel Optional

Brand V = Vybrid

Series F = current

Family 3 = Standard 5 = Advanced

Graphics 1 = No Open VG 2 = Open VG

Core 1 = Cortex A5 2 = Cortex A5 + M4 3 = M4 Primary

Version R = Auto

Speed A5 core 2 = 266MHz 4 = 400MHz

Package KU = 176LQFP MK = 364BGA

Temp Spec C = -40 to +85C Ta

Option K1 = Placeholder

Memory Option 3 = Standard 1.5MB SRAM 2 = Optional 1MB SRAM and 512K L2 Cache

Figure Part Number Format

Fields

This table lists the possible values for each field in the part number not all combinations are valid :

Field Q B S F C

Description Qualification status Brand Series Family Core

Graphics Version

Table continues on the next page...

Values
• P = engineering samples
• S = automotive qualified
• V = Vybrid
• F = current
• 3 = Standard
• 5 = Advanced
• 1 = Cortex A5
• 2 = Cortex A5 + M4
• 3 = M4 Primary
• 1 = No Open VG
• 2 = OpenVG
• R = Auto

Freescale Semiconductor, Inc.

Field M

Description Memory option

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived SVF332R3K1CKU2 Datasheet file may be downloaded here without warranties.

Datasheet ID: SVF332R3K1CKU2 635634