MB95F318EPMC-G-SNE2

MB95F318EPMC-G-SNE2 Datasheet

New 8FX MB95310L/370L Series

Part	Datasheet
MB95F318EPMC-G-SNE2	MB95F318EPMC-G-SNE2 (pdf)

Related Parts	Information
MB95F314EPMC-G-SNE2	MB95F314EPMC-G-SNE2
MB95F316EPMC-G-SNE2	MB95F316EPMC-G-SNE2

PDF Datasheet Preview
The following document contains information on Cypress products. DS07-12628-2E 8-bit Microcontrollers CMOS New 8FX MB95310L/370L Series MB95F314E/F314L/F316E/F316L/F318E/F318L MB95F374E/F374L/F376E/F376L/F378E/F378L • DESCRIPTION MB95310L/370L is a series of general-purpose, single-chip microcontrollers. In addition to a compact instruction set, the microcontrollers of this series contain a variety of peripheral resources. • FEATURES • F2MC-8FX CPU core Instruction set optimized for controllers • Multiplication and division instructions • 16-bit arithmetic operations • Bit test branch instructions • Bit manipulation instructions, etc. Note F2MC is the abbreviation of FUJITSU Flexible Microcontroller. • Clock • Selectable main clock source Main OSC clock up to MHz, maximum machine clock frequency MHz External clock up to MHz, maximum machine clock frequency MHz Main CR clock MHz ±2%, maximum machine clock frequency MHz Main PLL clock up to MHz, maximum machine clock frequency MHz • Selectable subclock source Sub-OSC clock kHz External clock kHz Sub-CR clock Typ 100 kHz, Min 50 kHz, Max 200 kHz • Timer • 8/16-bit composite timer • 8/16-bit PPG • 16-bit reload timer • Event counter • Time-base timer • Watch prescaler • UART-SIO • Capable of clock-asynchronous UART serial data transfer and clock-synchronous SIO serial data transfer • Full duplex double buffer Continued For the information for microcontroller supports, see the following website. Copyright 2010-2011 FUJITSU SEMICONDUCTOR LIMITED All rights reserved MB95310L/370L Series Continued • I2C Built-in wake-up function • External interrupt • Interrupt by edge detection rising edge, falling edge, and both edges can be selected • Can be used to wake up the device from different low power consumption standby modes • 8/10-bit A/D converter 8-bit or 10-bit resolution can be selected • LCD controller LCDC • 40 SEG x 4 COM • 32 SEG x 4 COM • Internal divider resistor • With blinking function • Low power consumption standby modes • Stop mode • Sleep mode • Watch mode • Time-base timer mode • I/O port • MB95F314E/F314L/F316E/F316L/F318E/F318L maximum no. of I/O ports 71 General-purpose I/O ports N-ch open drain 3 General-purpose I/O ports CMOS I/O • MB95F374E/F374L/F376E/F376L/F378E/F378L maximum no. of I/O ports 55 General-purpose I/O ports N-ch open drain 3 • ORDERING INFORMATION MB95F314EPMC-G-SNE2 MB95F314LPMC-G-SNE2 MB95F316EPMC-G-SNE2 MB95F316LPMC-G-SNE2 MB95F318EPMC-G-SNE2 MB95F318LPMC-G-SNE2 MB95F374EPMC1-G-SNE2 MB95F374LPMC1-G-SNE2 MB95F376EPMC1-G-SNE2 MB95F376LPMC1-G-SNE2 MB95F378EPMC1-G-SNE2 MB95F378LPMC1-G-SNE2 MB95F374EPMC2-G-SNE2 MB95F374LPMC2-G-SNE2 MB95F376EPMC2-G-SNE2 MB95F376LPMC2-G-SNE2 MB95F378EPMC2-G-SNE2 MB95F378LPMC2-G-SNE2 MB95310L/370L Series Package 80-pin plastic LQFP FPT-80P-M37 64-pin plastic LQFP FPT-64P-M38 64-pin plastic LQFP FPT-64P-M39 DS07-12628-2E MB95310L/370L Series • PACKAGE DIMENSION 80-pin plastic LQFP FPT-80P-M37 Lead pitch Package width x package length Lead shape Lead bend direction Sealing method Mounting height Weight mm x mm Gullwing Normal bend Plastic mold mm MAX 80-pin plastic LQFP FPT-80P-M37 14.00±0.20 .551±.008 SQ 12.00±0.10 .472±.004 SQ Note 1 These dimensions do not include resin protrusion. Note 2 Pins width and pins thickness include plating thickness. Note 3 Pins width do not include tie bar cutting remainder. Details of "A" part Mounting height 0~8° INDEX Stand off C 2009-2010 FUJITSU SEMICONDUCTOR LIMITED F80037S-c-1-2 Dimensions in mm inches . Note The values in parentheses are reference values. Please check the latest package dimension at the following URL. Continued DS07-12628-2E MB95310L/370L Series 64-pin plastic LQFP FPT-64P-M38 Lead pitch Package width x package length Lead shape Lead bend direction Sealing method Mounting height Weight mm x mm All Rights Reserved. The contents of this document are subject to change without notice. Customers are advised to consult with sales representatives before ordering. The information, such as descriptions of function and application circuit examples, in this document are presented solely for the purpose of reference to show examples of operations and uses of FUJITSU SEMICONDUCTOR device FUJITSU SEMICONDUCTOR does not warrant proper operation of the device with respect to use based on such information. When you develop equipment incorporating the device based on such information, you must assume any responsibility arising out of such use of the information. FUJITSU SEMICONDUCTOR assumes no liability for any damages whatsoever arising out of the use of the information. Any information in this document, including descriptions of function and schematic diagrams, shall not be construed as license of the use or exercise of any intellectual property right, such as patent right or copyright, or any other right of FUJITSU SEMICONDUCTOR or any third party or does FUJITSU SEMICONDUCTOR warrant non-infringement of any third-party's intellectual property right or other right by using such information. FUJITSU SEMICONDUCTOR assumes no liability for any infringement of the intellectual property rights or other rights of third parties which would result from the use of information contained herein. The products described in this document are designed, developed and manufactured as contemplated for general use, including without limitation, ordinary industrial use, general office use, personal use, and household use, but are not designed, developed and manufactured as contemplated 1 for use accompanying fatal risks or dangers that, unless extremely high safety is secured, could have a serious effect to the public, and could lead directly to death, personal injury, severe physical damage or other loss i.e., nuclear reaction control in nuclear facility, aircraft flight control, air traffic control, mass transport control, medical life support system, missile launch control in weapon system , or 2 for use requiring extremely high reliability i.e., submersible repeater and artificial satellite . Please note that FUJITSU SEMICONDUCTOR will not be liable against you and/or any third party for any claims or damages arising in connection with above-mentioned uses of the products. Any semiconductor devices have an inherent chance of failure. You must protect against injury, damage or loss from such failures by incorporating safety design measures into your facility and equipment such as redundancy, fire protection, and prevention of overcurrent levels and other abnormal operating conditions. Exportation/release of any products described in this document may require necessary procedures in accordance with the regulations of the Foreign Exchange and Foreign Trade Control Law of Japan and/or US export control laws. The company names and brand names herein are the trademarks or registered trademarks of their respective owners. Edited Sales Promotion Department

PDF Datasheet Preview

The following document contains information on Cypress products.

DS07-12628-2E
8-bit Microcontrollers

CMOS

New 8FX MB95310L/370L Series

MB95F314E/F314L/F316E/F316L/F318E/F318L MB95F374E/F374L/F376E/F376L/F378E/F378L
• DESCRIPTION

MB95310L/370L is a series of general-purpose, single-chip microcontrollers. In addition to a compact instruction set, the microcontrollers of this series contain a variety of peripheral resources.
• FEATURES
• F2MC-8FX CPU core Instruction set optimized for controllers
• Multiplication and division instructions
• 16-bit arithmetic operations
• Bit test branch instructions
• Bit manipulation instructions, etc.

Note F2MC is the abbreviation of FUJITSU Flexible Microcontroller.
• Clock
• Selectable main clock source Main OSC clock up to MHz, maximum machine clock frequency MHz External clock up to MHz, maximum machine clock frequency MHz Main CR clock MHz ±2%, maximum machine clock frequency MHz Main PLL clock up to MHz, maximum machine clock frequency MHz
• Selectable subclock source Sub-OSC clock kHz External clock kHz Sub-CR clock Typ 100 kHz, Min 50 kHz, Max 200 kHz
• Timer
• 8/16-bit composite timer
• 8/16-bit PPG
• 16-bit reload timer
• Event counter
• Time-base timer
• Watch prescaler
• UART-SIO
• Capable of clock-asynchronous UART serial data transfer and clock-synchronous SIO serial data transfer
• Full duplex double buffer Continued

For the information for microcontroller supports, see the following website.

Copyright 2010-2011 FUJITSU SEMICONDUCTOR LIMITED All rights reserved

MB95310L/370L Series

Continued
• I2C

Built-in wake-up function
• External interrupt
• Interrupt by edge detection rising edge, falling edge, and both edges can be selected
• Can be used to wake up the device from different low power consumption standby modes
• 8/10-bit A/D converter
8-bit or 10-bit resolution can be selected
• LCD controller LCDC
• 40 SEG x 4 COM
• 32 SEG x 4 COM
• Internal divider resistor
• With blinking function
• Low power consumption standby modes
• Stop mode
• Sleep mode
• Watch mode
• Time-base timer mode
• I/O port
• MB95F314E/F314L/F316E/F316L/F318E/F318L maximum no. of I/O ports 71

General-purpose I/O ports N-ch open drain 3

General-purpose I/O ports CMOS I/O
• MB95F374E/F374L/F376E/F376L/F378E/F378L maximum no. of I/O ports 55

General-purpose I/O ports N-ch open drain 3
• ORDERING INFORMATION

MB95F314EPMC-G-SNE2 MB95F314LPMC-G-SNE2 MB95F316EPMC-G-SNE2 MB95F316LPMC-G-SNE2 MB95F318EPMC-G-SNE2 MB95F318LPMC-G-SNE2

MB95F374EPMC1-G-SNE2 MB95F374LPMC1-G-SNE2 MB95F376EPMC1-G-SNE2 MB95F376LPMC1-G-SNE2 MB95F378EPMC1-G-SNE2 MB95F378LPMC1-G-SNE2

MB95F374EPMC2-G-SNE2 MB95F374LPMC2-G-SNE2 MB95F376EPMC2-G-SNE2 MB95F376LPMC2-G-SNE2 MB95F378EPMC2-G-SNE2 MB95F378LPMC2-G-SNE2

MB95310L/370L Series

Package 80-pin plastic LQFP

FPT-80P-M37
64-pin plastic LQFP FPT-64P-M38
64-pin plastic LQFP FPT-64P-M39

DS07-12628-2E

MB95310L/370L Series
• PACKAGE DIMENSION
80-pin plastic LQFP

FPT-80P-M37

Lead pitch Package width x package length

Lead shape Lead bend direction Sealing method

Mounting height

Weight
mm x mm

Gullwing Normal bend Plastic mold mm MAX
80-pin plastic LQFP FPT-80P-M37
14.00±0.20 .551±.008 SQ
*12.00±0.10 .472±.004 SQ

Note 1 * These dimensions do not include resin protrusion. Note 2 Pins width and pins thickness include plating thickness. Note 3 Pins width do not include tie bar cutting remainder.

Details of "A" part

Mounting height
0~8°

INDEX

Stand off

C 2009-2010 FUJITSU SEMICONDUCTOR LIMITED F80037S-c-1-2

Dimensions in mm inches . Note The values in parentheses are reference values.

Please check the latest package dimension at the following URL.

Continued

DS07-12628-2E

MB95310L/370L Series
64-pin plastic LQFP FPT-64P-M38

Lead pitch Package width x package length

Lead shape Lead bend direction Sealing method

Mounting height

Weight
mm x mm
All Rights Reserved. The contents of this document are subject to change without notice. Customers are advised to consult with sales representatives before ordering. The information, such as descriptions of function and application circuit examples, in this document are presented solely for the purpose of reference to show examples of operations and uses of FUJITSU SEMICONDUCTOR device FUJITSU SEMICONDUCTOR does not warrant proper operation of the device with respect to use based on such information. When you develop equipment incorporating the device based on such information, you must assume any responsibility arising out of such use of the information. FUJITSU SEMICONDUCTOR assumes no liability for any damages whatsoever arising out of the use of the information. Any information in this document, including descriptions of function and schematic diagrams, shall not be construed as license of the use or exercise of any intellectual property right, such as patent right or copyright, or any other right of FUJITSU SEMICONDUCTOR or any third party or does FUJITSU SEMICONDUCTOR warrant non-infringement of any third-party's intellectual property right or other right by using such information. FUJITSU SEMICONDUCTOR assumes no liability for any infringement of the intellectual property rights or other rights of third parties which would result from the use of information contained herein. The products described in this document are designed, developed and manufactured as contemplated for general use, including without limitation, ordinary industrial use, general office use, personal use, and household use, but are not designed, developed and manufactured as contemplated 1 for use accompanying fatal risks or dangers that, unless extremely high safety is secured, could have a serious effect to the public, and could lead directly to death, personal injury, severe physical damage or other loss i.e., nuclear reaction control in nuclear facility, aircraft flight control, air traffic control, mass transport control, medical life support system, missile launch control in weapon system , or 2 for use requiring extremely high reliability i.e., submersible repeater and artificial satellite . Please note that FUJITSU SEMICONDUCTOR will not be liable against you and/or any third party for any claims or damages arising in connection with above-mentioned uses of the products. Any semiconductor devices have an inherent chance of failure. You must protect against injury, damage or loss from such failures by incorporating safety design measures into your facility and equipment such as redundancy, fire protection, and prevention of overcurrent levels and other abnormal operating conditions. Exportation/release of any products described in this document may require necessary procedures in accordance with the regulations of the Foreign Exchange and Foreign Trade Control Law of Japan and/or US export control laws. The company names and brand names herein are the trademarks or registered trademarks of their respective owners.

Edited Sales Promotion Department

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived MB95F318EPMC-G-SNE2 Datasheet file may be downloaded here without warranties.

Datasheet ID: MB95F318EPMC-G-SNE2 635651