MMA1210D

MMA1210D Datasheet


Order Number MMA1210D Rev. 2, 06/2004

Part Datasheet
MMA1210D MMA1210D MMA1210D (pdf)
PDF Datasheet Preview
Freescale Semiconductor, Inc...

Freescale Semiconductor, Inc. MOTOROLA

SEMICONDUCTOR TECHNICAL DATA

Surface Mount Micromachined Accelerometer

The MMA series of silicon capacitive, micromachined accelerometers features signal conditioning, a 4-pole low pass filter and temperature compensation. Zero-g offset full scale span and filter cut-off are factory set and require no external devices. A full system self-test capability verifies system functionality.

Features
• Integral Signal Conditioning
• Linear Output
• Ratiometric Performance
• 4th Order Bessel Filter Preserves Pulse Shape Integrity
• Calibrated Self-test
• Low Voltage Detect, Clock Monitor, and EPROM Parity Check Status
• Transducer Hermetically Sealed at Wafer Level for Superior Reliability
• Robust Design, High Shocks Survivability

Typical Applications
• Vibration Monitoring and Recording
• Impact Monitoring
ORDERING INFORMATION

Device

Temperature Range

Package

MMA1210D
40 to +125°C SOIC-16

MMA1210DR2 40 to +125°C SOIC-16, Tape & Reel

MMA1210D

MMA1210D Z AXIS SENSITIVITY MICROMACHINED ACCELEROMETER ±100g
16 LEAD SOIC CASE 475-01

PIN ASSIGNMENT

VOUT

STATUS
16 N/C 15 N/C 14 N/C 13 N/C 12 N/C 11 N/C 10 N/C 9 N/C

Motorola, Inc. 2004

G-Cell Sensor

Integrator

Gain

Filter

Temp Comp

VDD VOUT

ST Self-test

Control Logic & EPROM Trim

Circuits

Oscillator

Clock

Gen.

Status

Figure Simplified Accelerometer Functional Block Diagram

For More Information On This Product, Go to:

Freescale Semiconductor, Inc.

Maximum Ratings Maximum ratings are the limits to which the device can be exposed without causing permanent damage.

Rating Powered Acceleration all axes Unpowered Acceleration all axes Supply Voltage Drop Test 1 Storage Temperature Range

NOTES Dropped onto concrete surface from any axis.

Symbol Gpd Gupd VDD Ddrop Tstg

Value 1500 2000 to +125

Unit g V m °C

ELECTRO STATIC DISCHARGE ESD

WARNING This device is sensitive to electrostatic discharge.

Although the Motorola accelerometers contain internal 2kV ESD protection circuitry, extra precaution must be taken by the user to protect the chip from ESD. A charge of over 2000 volts can accumulate on the human body or associated test equipment. A charge of this magnitude can alter the
performance or cause failure of the chip. When handling the accelerometer, proper ESD precautions should be followed to avoid exposing the device to discharges which may be detrimental to its performance.
More datasheets: IDT74LVC244APYG | DAMH15SZA197 | MD9752NSZ-1 | 1259587401 | C192K104K1R5CA | 76650-0135 | 72221L25JG | SPS04N60C3BKMA1 | APT12F60K | IPP06CNE8N G


Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived MMA1210D Datasheet file may be downloaded here without warranties.

Datasheet ID: MMA1210D 635521