AT91CAP9HA20-DK18

AT91CAP9HA20-DK18 Datasheet


AT91CAP9HA-DK Development Kit for CAP Customizable Microcontroller

Part Datasheet
AT91CAP9HA20-DK18 AT91CAP9HA20-DK18 AT91CAP9HA20-DK18 (pdf)
Related Parts Information
AT91CAP9HA15-DK18 AT91CAP9HA15-DK18 AT91CAP9HA15-DK18
AT91CAP9HA20-DK33 AT91CAP9HA20-DK33 AT91CAP9HA20-DK33
AT91CAP9HA20-NADK8 AT91CAP9HA20-NADK8 AT91CAP9HA20-NADK8
AT91CAP9HA20-NADK3 AT91CAP9HA20-NADK3 AT91CAP9HA20-NADK3
AT91CAP9HA15-DK33 AT91CAP9HA15-DK33 AT91CAP9HA15-DK33
AT91CAP9A-NA-UWB-EK AT91CAP9A-NA-UWB-EK AT91CAP9A-NA-UWB-EK
AT91CAP7X-DK33 AT91CAP7X-DK33 AT91CAP7X-DK33
AT91CAP9HA15-NADK3 AT91CAP9HA15-NADK3 AT91CAP9HA15-NADK3
AT91CAP9HA15-NADK8 AT91CAP9HA15-NADK8 AT91CAP9HA15-NADK8
PDF Datasheet Preview
CAP Customizable Microcontroller

AT91CAP9HA-DK Development Kit for CAP Customizable Microcontroller

The AT91CAP9HA-DK Development Kit is the ideal platform to start developing designs on the ARM926EJ-S -based CAP9H customizable microcontroller. The fixed portion of the CAP9H device is implemented as a microcontroller standard product, coupled to a high-density FPGA, integrating the equivalent of 2 million ASIC gates, that emulates the metal programmable block. The kit can be rapidly configured to emulate the behavior of a design under development. This saves time and reduces development costs, enabling customer designs to be fully debugged before commitment to metal programmed silicon, making right-first-time silicon easier to achieve.

The kit consists of three associated boards, the motherboard, mezzanine and memory extension, to be used jointly. The boards include a range of memories and physical interfaces/connectors representing external system components. This configuration enables parallel hardware/software testing of the application under development at close to operational speed, with no penalty for hardware modifications. Software development proceeds in parallel with hardware development, and significantly reduces the design cycle time, increasing confidence in a right-first-time system solution.

Motherboard
• ATX power supply connector
• 2x Full-speed Host USB interfaces
• 100-base T Ethernet PHY with three status LEDs
• DBGU serial communication port
• 4x analog inputs
• AC97 interface with three mm audio jack
connectors
• I2S audio codec with two mm audio jack
connectors
• 2x SD/MMC card slots
• Atmel TWI serial EEPROM
• inch QVGA display LCD with Touch Panel
• Touch Screen Controller
• Image Sensor expansion connector
• Push button keyboard and user LEDs
• CAN bus interface
• PIO expansion connectors PIOA, PIOB, PIOC, PIOD
• Extension connectors
• 3x USB device PHY interfaces with USB B connectors

FPGA controlled

Mezzanine Board
• AT91CAP9 ARM926EJ-S-based microcontroller
• III FPGA, equivalent to 2 million

ASIC gates lower cost version available equivalent to million ASIC gates

Memory Extension Board
• 1.8V option hosting Burst Cellular RAM, NAND Flash, Mobile DDR SDRAM and a service TWI EEPROM
• 3.3V option hosting SDRAM, NAND Flash, NOR Flash and a service TWI EEPROM

AT91CAP9HA-DK Development Kit for CAP Customizable Microcontroller

CAP Product Family Development Kits

The CAP family of ARM7 - and ARM9 -based products is supported by a full range of development kits. The motherboard is common to all kits. Mezzanine boards and memory extension boards are available in different variants to respond to customer needs in gate count and memory type.

Product AT91CAP7X Dev Kit AT91CAP9A Dev Kit AT91CAP9HA15 Dev Kit AT91CAP9HA20 Dev Kit

Gate Count 4 FPGA equivalent 500K ASIC gates

II FPGA equivalent 500K ASIC gates

III FPGA equivalent 1.5M ASIC gates

III FPGA equivalent 2M ASIC gates

Memory Type

XXXX
1.8V Memory Board 3.3V Memory Board
1.8V Memory Board 3.3V Memory Board
1.8V Memory Board 3.3V Memory Board
1.8V Memory Board 3.3V Memory Board

CAP Motherboard

Headquarters

Atmel Corporation 2325 Orchard Parkway San Jose, CA 95131, USA Tel. +1 408 441 0311 Fax +1 408 487 2600

International

Atmel Asia Unit 1-5 & 16, 19/F BEA Tower Millennium City 5 418 Kwun Tong Road Kwun Tong, Kowloon Hong Kong Tel. 852 2245 6100 Fax 852 2722 1369

Atmel Europe Le Krebs 8, rue Jean-Pierre Timbaud B.P. 309 78054 Saint-Quentin-en-Yvelines Cedex, France Tel. 33 1 30 60 70 00 Fax 33 1 30 60 71 11

Atmel Japan 9F, Tonetsu Shinkawa Bldg. 1-24-8 Shinkawa Chuo-ku, Tokyo 104-0033 Japan Tel. 81 3 3523 3551 Fax 81 3 3523 7581

Product Contacts

Technical Support

Sales Contacts

Web Site
More datasheets: 74ACT241SJ | ADG426BRSZ-REEL7 | FDS5682 | 50739071432600F | ADW22037Z-RL | ADW22037Z-RL7 | AT91CAP9HA15-DK18 | AT91CAP9HA20-DK33 | AT91CAP9HA20-NADK8 | AT91CAP9HA20-NADK3


Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived AT91CAP9HA20-DK18 Datasheet file may be downloaded here without warranties.

Datasheet ID: AT91CAP9HA20-DK18 519335