KL5BPLC200WMP

KL5BPLC200WMP Datasheet

KL5BPLC200WMP Datasheet Rev.

Part	Datasheet
KL5BPLC200WMP	KL5BPLC200WMP (pdf)

PDF Datasheet Preview
KDS-PLCBB00-EAA001 KL5BPLC200WMP HD-PLC Data Processing IC Datasheet MegaChips Corporation’ Proprietary This document contains proprietary information of MegaChips Corporation. MegaChips Corporation reserves the right to make any change herein at any time without prior notice. MegaChips Corporation does not assume any responsibility or liability arising out of application or use of any product or service described herein except as explicitly agreed upon. Proprietary KDS-PLCFF00-EAA001 Table of Contents 1 Product overview 2 Function Overview 2 Block 3 2 Pins 4 Pin Assignments 4 Pin Descriptions 5 3 Operating Conditions 13 Absolute Maximum Ratings 13 Recommended Operating Conditions 13 5 Ordering Information 14 Proprietary KDS-PLCFF00-EAA001 1 Product overview Function Overview The KL5BPLC200WMP is an HD-PLC LSI designed to connect a wide range of home network devices in a flexible manner using existing residential electrical wiring. Its capabilities include transmission of high-definition video and other broadband content. HD-PLC is the name of a high definition power line communication system put forth by Panasonic. Thanks to compatibility with the ubiquitous Ethernet standard, the KL5BPLC200WMP can be easily connected to network-enabled products such as broadband networks, televisions, and computers anywhere there is an electrical outlet simply by supporting the Internet protocol IP , which already enjoys widespread use. The KL5BPLC200WMP incorporates a 32-bit RISC processor and provides a single-chip implementation of high-performance wavelet conversion OFDM functionality, MAC processing functionality with high-quality QoS support, and HD-PLC/Ethernet bridge functionality. QoS functionality can be used to guarantee a fixed communication speed for a variety of communications ranging from data transmission and reception to video streaming and IP telephony. The KL5BPLC200WMP also has highly integrated analog front-end chip so that no other analog front-end IC for PLC is necessary. An on-chip PLL multiplier and synthesizer provide all the required clock signals from a single crystal or clock source. Following are the features of KL5BPLC200WMP. Single chip solution for HD-PLC application. Network construction and optimization, advanced network diagnostics and management. HD-PLC network bridge function compatible with Ethernet address system. Ensuring the security and easy connectivity by data encryption using AES. High-speed communications up to 432 carriers within 2-28MHz band Maximum PHY Rate 240Mbps without notch Determine the optimal rate according to the power line channel characteristics with the multilevel modulation for each sub-carrier. Optional sub-carriers masking function to be adapted to individual country's regulations. Level-up function to achieve maximum speed under individual country's regulations. Error correction and selective transmission retry to achieve efficient frame transfer. Backward compatible with existing 1st, 2nd HD-PLC systems. IEEE1901 compliant Wavelet MAC/PHY, ISP Proprietary KDS-PLCFF00-EAA001 Block Diagram Figure- 1 shows a block diagram of the KL5BPLC200WMP. NRESET SYSCLK 31.25MHz Clock & Reset PLL BaseBand GPIO UART TIMER DMAC INTC ARM946E-S I-Cache PLC-PHY SPI FLASH Controller PLC-MAC SDRAM Controller Ether MAC Serial FLASH SDRAM Ether-PHY 2x Digital Interpolation Digital Interface 10 RX ADC TX DAC 160MSPS PGA LPF IAMP Register Controller KHN13200 IOUTP IOUTN RXP RXN Figure- 1 KL5BPLC200WMP Block Diagram Proprietary 5 Ordering Information Part Number KL5BPLC200WMP Proprietary KDS-PLCFF00-EAA001 Notice - Semiconductor products may possibly experience breakdown or malfunction. Adequate care should be taken with respect to the safety design of equipment in order to prevent the occurrence of human injury, fire or social loss in the event of breakdown or malfunction of semiconductor products - The overview of operations and illustration of applications described in this document indicate the conceptual method of use of the semiconductor product and do not guarantee operability in equipment in which the product is actually used. - The names of companies and trademarks stated in this document are registered trademarks of the relevant companies. - MegaChips Corporation provides no guarantees nor grants any implementation rights with respect to industrial property rights, intellectual property rights and other such rights belonging to third parties or/and MegaChips Corporation in the use of products and of technical information including information on the overview of operations and the circuit diagrams that are described in this document. - The product described in this document may possibly be considered goods or technology regulated by the Foreign Currency and Foreign Trade Control Law. In the event such law applies, export license will be required under said law when exporting the product. This regulation shall be valid in Japan domestic. - In the event the intention is to use the product described in this document in applications that require an extremely high standard of reliability such as nuclear systems, aerospace equipment or medical equipment for life support, please contact the sales department of MegaChips Corporation in advance. - All information contained in this document is subject to change without notice. Proprietary

PDF Datasheet Preview

KDS-PLCBB00-EAA001

KL5BPLC200WMP HD-PLC Data Processing IC

Datasheet

MegaChips Corporation’ Proprietary

This document contains proprietary information of MegaChips Corporation. MegaChips Corporation reserves the right to make any change herein at any time without prior notice. MegaChips Corporation does not assume any responsibility or liability arising out of application or use of any product or service described herein except as explicitly agreed upon. Proprietary

KDS-PLCFF00-EAA001

Table of Contents
1 Product overview 2 Function Overview 2 Block 3
2 Pins 4 Pin Assignments 4 Pin Descriptions 5
3 Operating Conditions 13 Absolute Maximum Ratings 13 Recommended Operating Conditions 13
5 Ordering Information 14

Proprietary

KDS-PLCFF00-EAA001
1 Product overview

Function Overview

The KL5BPLC200WMP is an HD-PLC LSI designed to connect a wide range of home network devices in a flexible manner using existing residential electrical wiring. Its capabilities include transmission of high-definition video and other broadband content. HD-PLC is the name of a high definition power line communication system put forth by Panasonic.

Thanks to compatibility with the ubiquitous Ethernet standard, the KL5BPLC200WMP can be easily connected to network-enabled products such as broadband networks, televisions, and computers anywhere there is an electrical outlet simply by supporting the Internet protocol IP , which already enjoys widespread use.

The KL5BPLC200WMP incorporates a 32-bit RISC processor and provides a single-chip implementation of high-performance wavelet conversion OFDM functionality, MAC processing functionality with high-quality QoS support, and HD-PLC/Ethernet bridge functionality.

QoS functionality can be used to guarantee a fixed communication speed for a variety of communications ranging from data transmission and reception to video streaming and IP telephony.

The KL5BPLC200WMP also has highly integrated analog front-end chip so that no other analog front-end IC for PLC is necessary. An on-chip PLL multiplier and synthesizer provide all the required clock signals from a single crystal or clock source.

Following are the features of KL5BPLC200WMP. Single chip solution for HD-PLC application. Network construction and optimization, advanced network diagnostics and management. HD-PLC network bridge function compatible with Ethernet address system. Ensuring the security and easy connectivity by data encryption using AES. High-speed communications up to 432 carriers within 2-28MHz band Maximum PHY Rate 240Mbps without notch Determine the optimal rate according to the power line channel characteristics with the multilevel modulation for each sub-carrier. Optional sub-carriers masking function to be adapted to individual country's regulations. Level-up function to achieve maximum speed under individual country's regulations. Error correction and selective transmission retry to achieve efficient frame transfer. Backward compatible with existing 1st, 2nd HD-PLC systems. IEEE1901 compliant Wavelet MAC/PHY, ISP

Proprietary

KDS-PLCFF00-EAA001

Block Diagram

Figure- 1 shows a block diagram of the KL5BPLC200WMP.

NRESET

SYSCLK 31.25MHz

Clock & Reset PLL

BaseBand

GPIO UART TIMER DMAC INTC

ARM946E-S I-Cache

PLC-PHY

SPI FLASH Controller

PLC-MAC

SDRAM Controller

Ether MAC

Serial FLASH

SDRAM Ether-PHY
2x Digital

Interpolation

Digital Interface
10 RX ADC

TX DAC 160MSPS

PGA LPF

IAMP

Register Controller

KHN13200

IOUTP IOUTN

RXP RXN

Figure- 1 KL5BPLC200WMP Block Diagram

Proprietary
5 Ordering Information

Part Number KL5BPLC200WMP

Proprietary

KDS-PLCFF00-EAA001

Notice - Semiconductor products may possibly experience breakdown or malfunction. Adequate care should be taken with respect to the safety
design of equipment in order to prevent the occurrence of human injury, fire or social loss in the event of breakdown or malfunction of semiconductor products
- The overview of operations and illustration of applications described in this document indicate the conceptual method of use of the
semiconductor product and do not guarantee operability in equipment in which the product is actually used.
- The names of companies and trademarks stated in this document are registered trademarks of the relevant companies. - MegaChips Corporation provides no guarantees nor grants any implementation rights with respect to industrial property rights,
intellectual property rights and other such rights belonging to third parties or/and MegaChips Corporation in the use of products and of technical information including information on the overview of operations and the circuit diagrams that are described in this document.
- The product described in this document may possibly be considered goods or technology regulated by the Foreign Currency and

Foreign Trade Control Law. In the event such law applies, export license will be required under said law when exporting the product. This regulation shall be valid in Japan domestic.
- In the event the intention is to use the product described in this document in applications that require an extremely high standard of
reliability such as nuclear systems, aerospace equipment or medical equipment for life support, please contact the sales department of MegaChips Corporation in advance.
- All information contained in this document is subject to change without notice.

Proprietary

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived KL5BPLC200WMP Datasheet file may be downloaded here without warranties.

Datasheet ID: KL5BPLC200WMP 647754