MAX17039
Part | Datasheet |
---|---|
![]() |
MAX17039GTN+T (pdf) |
Related Parts | Information |
---|---|
![]() |
MAX17039GTN+ |
PDF Datasheet Preview |
---|
MAX17039 Dual-Output, 3-Phase + 1 Phase Quick-PWM Controller for VR12/IMVP-7 The MAX17039 is a dual-output, step-down, constanton-time controller for VR12/IMVP-7 CPU core supplies. The controller consists of two high-current-switching power supplies for the CPU and GPU cores. The CPU regulator A is a three-phase constant-on-time architecture. The optional 3rd phase is configured with an external MAX8791 or MAX17491 driver. The second GPU regulator B is also a constant-on-time architecture with only single phase. Both regulators A and B include true differential voltage and current sensing to improve load-line and currentlimit accuracy. Switching frequencies are independently programmable, allowing 100kHz to 600kHz per phase operation. Output overvoltage protection OVP , undervoltage protection UVP , and thermal protection ensure effective and highly reliable operation. When any of these protection features detect a fault, the controller shuts down both channels. Regulator A includes transient-phase overlap, which speeds up the response time, reducing the total output capacitance. Regulator A also includes active overshoot suppression to further reduce the required output decoupling capacitance. Both controllers are fully compliant with Intel’s VR12/ IMVP-7 serial VID communication and control specifications. CPU and GPU outputs are controlled independently by writing the appropriate data into a function-mapped register file. A slew-rate controller allows controlled transitions between VID codes, controlled soft-start. The SVID interface also allows each regulator to be individually set into a low-power pulse-skipping state. Individual phases can be shut down based on the processors’ operating conditions to optimize efficiency. The MAX17039 is available in a lead-free, 56-pin, 7mm x 7mm TQFN package. VR12/IMVP-7 CPU Core Power Supplies Voltage-Positioned Step-Down Converters Notebooks/Desktops/Servers Pin Configuration appears at end of data sheet. S Supports all Required IMVP-7 Functions S Three-Phase Quick-PWM CPU Core Regulator A Two Internal Drivers and One External Driver Active Overshoot Suppression Transient-Phase Overlap Mode Dynamic Phase Selection Phase-Good Fault Detection Internal S One-Phase Quick-PWM with Internal Driver Regulator B S Intel VR12/IMVP-7-Compliant 25MHz Serial Interface S 8-Bit IMVP-7 DAC S VOUT Accuracy Over Line, Load, and Temperature S Active Voltage Positioning with Programmable Gain S Accurate Lossless Current Balance S Accurate Droop and Current Limit S Remote Output and Ground Sense S Power-Good Window Comparators VR__READY S Output Current Monitors IMON_ S 4.5V to 26V Battery-Input Range S Drives Large Synchronous Rectifier MOSFETs S Programmable 100kHz to 600kHz Switching Frequency S External Thermal-Fault Detection VR_HOT# Output S Overvoltage, Undervoltage, and Thermal-Fault Protection S Soft-Start and Soft-Shutdown S Integrated Boost Switches S Low-Profile 56-Lead TQFN Package Ordering Information PART TEMP RANGE MAX17039GTN+ -40NC to +105NC PINPACKAGE 56 TQFN 3-phase + 1 phase 1 external driver +Denotes a lead Pb -free/RoHS-compliant package. Quick-PWM is a trademark of Maxim Integrated Products, Inc. Maxim Integrated Products 1 For pricing, delivery, and ordering information, please contact Maxim Direct at 1-888-629-4642, or visit Maxim’s website at |
More datasheets: ASCX05DN | LTDL-TX12S01B | APTGF75DA120T1G | 50500 | A09-Y8NF | 76650-0071 | DCMM27W2PK87 | IRFS540A | SEP8507-001 | SB80C186XL12 |
Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived MAX17039GTN+T Datasheet file may be downloaded here without warranties.