MAX109EVKIT

MAX109EVKIT Datasheet

MAX109 Evaluation Kit

Part	Datasheet
MAX109EVKIT	MAX109EVKIT (pdf)

PDF Datasheet Preview
MAX109 Evaluation Kit Evaluates MAX109 The MAX109 evaluation kit EV kit is a fully assembled and tested PCB that contains all the components necessary to evaluate the performance of the MAX109 8bit, 2.2Gsps analog-to-digital converter ADC with track/hold amplifier and 1:4 demultiplexed LVDS outputs. The MAX109 EV kit analog and clock input signals can either be differential or single-ended. The EV kit circuit provides connectors to configure the ADC’s control inputs. The demultiplexed ADC LVDS digital outputs can be captured with a user-supplied high-speed logic analyzer or data-acquisition system. A heatsink-fan module is provided to better control the MAX109 die temperature and further improve the converter’s dynamic performance. o 2.2Gsps Maximum Sampling Rate o LVDS Data Outputs o Separate Analog and Digital Power and Ground Connections o Optimized Six-Layer PCB Design o Pin-Header Connectors Ease Connection to a Logic Analyzer o On-Board Cooling Fan o Fully Assembled and Tested Ordering Information PART MAX109EVKIT TYPE EV Kit DESIGNATION CLKN, CLKP, RSTINN, RSTINP, INN, INP C9, C11, C10, 6 SMA edge-mount connectors 0.01uF ±10%, 25V X7R ceramic capacitors 0402 TDK C1005X7R1E103K Taiyo Yuden TMK105BJ103KV 3.3uF ±10%, 6.3V X5R ceramic capacitor 0805 Murata GRM21BR60J335K Taiyo Yuden JMK212BJ335KG 1uF ±10%, 10V X7R ceramic capacitors 0603 TDK C1608X7R1A105K Taiyo Yuden LMK107BJ105KA 330uF ±20%, 10V tantalum 5 capacitors D AVX TPSD337M010R0050 33uF ±20%, 10V tantalum 5 capacitors B AVX TPSB336M010R0250 Component List DESIGNATION C49, C50 GNDI, GNDA J1, J2, J3 JU1, JU2, JU3 R1, R2 R3, R4 R40 R41 TEMP, TP1, TP2, VTT 2 3 7 2 35 1 0.1uF ±10%, 10V X5R ceramic capacitors 0402 TDK C1005X5R1A104K Taiyo Yuden LMK105BJ104KV Not installed, ceramic capacitor 1210 20V, 1A Schottky diode SOD-123 Central Semiconductor CMMSH120+, lead-free Top Mark CS20F Test point black Dual-row 2 x 25 50-pin headers 2-pin headers 3-pin headers multiturn potentiometer, 1/4in ±1% resistors 0603 ±1% resistors 0402 ±1% resistor 0603 ±1% resistors 0603 4 Test points red Maxim Integrated Products 1 For pricing, delivery, and ordering information, please contact Maxim Direct at 1-888-629-4642, or visit Maxim’s website at Evaluates MAX109 MAX109 Evaluation Kit Component List continued DESIGNATION U1 QTY 1 8-bit, 2.2Gsps ADC with LVDS outputs 256 SBGA Maxim MAX109EHF-D 500mA adjustable LDO 6 SOT23 Maxim MAX1818EUT15# Top Mark AAS0 or Maxim MAX1818EUT20# Top Mark AANV Heatsink with fan 30mm x 30mm 1 x 10mm Cofan 30-1101 02 9 Shunts 1 PCB MAX109 Evaluation Kit Component Suppliers SUPPLIER AVX Corp. PHONE WEBSITE 843-946-0238 Central Semiconductor 631-435-1110 Taiyo Yuden 800-348-2496 TDK Corp. 847-803-6100 Note Indicate that you are using the MAX109 when contacting these component suppliers. Quick Start Recommended Equipment Before beginning, the following equipment is needed: • MAX109 EV kit • Six DC power supplies: 1 VCCI +5V, 250mA 2 VEE -5V, 300mA 3 VCCA +5V, 1A 4 VCCD +5V, 500mA 5 VCCO +3.3V, 500mA 6 VFAN +5V, 200mA • Signal generator with low-phase noise and low jitter for clock input e.g., HP/Agilent 8663A • Signal generator for analog signal input e.g., HP/Agilent 8663A • Balun transformers for single-ended to differentialsignal conversion e.g., M/A-COM H-9 • Logic analyzer or data-acquisition system e.g., Tektronix TLA714 • Tunable bandpass filters e.g., K&L Microwave for analog and clock input signals • Digital voltmeter Procedure The MAX109 EV kit is a fully assembled and tested surface-mount PCB. Follow the steps below to verify board operation. Caution Do not turn on power supplies or enable signal generators until all connections are completed. 1 Verify that shunts are installed across jumpers JU1

PDF Datasheet Preview

MAX109 Evaluation Kit

Evaluates MAX109

The MAX109 evaluation kit EV kit is a fully assembled and tested PCB that contains all the components necessary to evaluate the performance of the MAX109 8bit, 2.2Gsps analog-to-digital converter ADC with track/hold amplifier and 1:4 demultiplexed LVDS outputs. The MAX109 EV kit analog and clock input signals can either be differential or single-ended. The EV kit circuit provides connectors to configure the ADC’s control inputs. The demultiplexed ADC LVDS digital outputs can be captured with a user-supplied high-speed logic analyzer or data-acquisition system. A heatsink-fan module is provided to better control the MAX109 die temperature and further improve the converter’s dynamic performance.
o 2.2Gsps Maximum Sampling Rate o LVDS Data Outputs o Separate Analog and Digital Power and Ground

Connections o Optimized Six-Layer PCB Design o Pin-Header Connectors Ease Connection to a

Logic Analyzer o On-Board Cooling Fan o Fully Assembled and Tested
Ordering Information

PART MAX109EVKIT

TYPE EV Kit

DESIGNATION CLKN, CLKP,

RSTINN, RSTINP, INN, INP C9, C11,

C10,
6 SMA edge-mount connectors
0.01uF ±10%, 25V X7R ceramic
capacitors 0402 TDK C1005X7R1E103K

Taiyo Yuden TMK105BJ103KV
3.3uF ±10%, 6.3V X5R ceramic
capacitor 0805 Murata GRM21BR60J335K

Taiyo Yuden JMK212BJ335KG
1uF ±10%, 10V X7R ceramic
capacitors 0603 TDK C1608X7R1A105K

Taiyo Yuden LMK107BJ105KA
330uF ±20%, 10V tantalum 5 capacitors D

AVX TPSD337M010R0050
33uF ±20%, 10V tantalum 5 capacitors B

AVX TPSB336M010R0250

Component List

DESIGNATION

C49, C50

GNDI, GNDA J1, J2, J3

JU1, JU2, JU3 R1, R2 R3, R4 R40 R41 TEMP, TP1, TP2, VTT
2 3 7 2 35 1
0.1uF ±10%, 10V X5R ceramic capacitors 0402 TDK C1005X5R1A104K Taiyo Yuden LMK105BJ104KV

Not installed, ceramic capacitor 1210
20V, 1A Schottky diode SOD-123 Central Semiconductor CMMSH120+, lead-free Top Mark CS20F

Test point black Dual-row 2 x 25 50-pin headers 2-pin headers 3-pin headers
multiturn potentiometer, 1/4in
±1% resistors 0603 ±1% resistors 0402 ±1% resistor 0603 ±1% resistors 0603
4 Test points red

Maxim Integrated Products 1
For pricing, delivery, and ordering information, please contact Maxim Direct at 1-888-629-4642, or visit Maxim’s website at

Evaluates MAX109

MAX109 Evaluation Kit

Component List continued

DESIGNATION U1

QTY 1
8-bit, 2.2Gsps ADC with LVDS outputs 256 SBGA Maxim MAX109EHF-D
500mA adjustable LDO 6 SOT23 Maxim MAX1818EUT15# Top Mark AAS0 or Maxim MAX1818EUT20# Top Mark AANV

Heatsink with fan 30mm x 30mm 1 x 10mm

Cofan 30-1101 02
9 Shunts 1 PCB MAX109 Evaluation Kit

Component Suppliers

SUPPLIER AVX Corp.

PHONE

WEBSITE
843-946-0238

Central Semiconductor
631-435-1110

Taiyo Yuden
800-348-2496

TDK Corp.
847-803-6100

Note Indicate that you are using the MAX109 when contacting these component suppliers.

Quick Start

Recommended Equipment Before beginning, the following equipment is needed:
• MAX109 EV kit
• Six DC power supplies:
1 VCCI +5V, 250mA
2 VEE
-5V, 300mA
3 VCCA +5V, 1A
4 VCCD +5V, 500mA
5 VCCO +3.3V, 500mA
6 VFAN +5V, 200mA
• Signal generator with low-phase noise and low jitter for clock input e.g., HP/Agilent 8663A
• Signal generator for analog signal input e.g., HP/Agilent 8663A
• Balun transformers for single-ended to differentialsignal conversion e.g., M/A-COM H-9
• Logic analyzer or data-acquisition system e.g., Tektronix TLA714
• Tunable bandpass filters e.g., K&L Microwave for analog and clock input signals
• Digital voltmeter

Procedure The MAX109 EV kit is a fully assembled and tested surface-mount PCB. Follow the steps below to verify board operation. Caution Do not turn on power supplies or enable signal generators until all connections are completed. 1 Verify that shunts are installed across jumpers JU1

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived MAX109EVKIT Datasheet file may be downloaded here without warranties.

Datasheet ID: MAX109EVKIT 647203