LTL2H3FX1K

LTL2H3FX1K Datasheet

Part No. LTL2H3FX1K

Part	Datasheet
LTL2H3FX1K	LTL2H3FX1K (pdf)

PDF Datasheet Preview
LITE-ON TECHNOLOGY CORPORATION Property of Lite-On Only * Lead Pb free product RoHS compliant. * Low power consumption. * High efficiency. * Versatile mounting on P.C. board or panel. * I.C. Compatible/low current requirements. * Popular T-13/4 diameter. Package Dimensions Part No. LTL2H3FX1K Lens Water Clear Source Color AlInGaP Red Orange Notes All dimensions are in millimeters inches . Tolerance is ±0.25mm .010" unless otherwise noted. Protruded resin under flange is 1.0mm .04" max. Lead spacing is measured where the leads emerge from the package. Specifications are subject to change without notice. Part No. LTL2H3FX1K BNS-OD-C131/A4 Page 1 of 10 LITE-ON TECHNOLOGY CORPORATION Property of Lite-On Only Absolute Maximum Ratings at TA=25°C Parameter Power Dissipation Peak Forward Current 1/10 Duty Cycle, 0.1ms Pulse Width DC Forward Current Derating Linear From 30°C Operating Temperature Range Storage Temperature Range Lead Soldering Temperature [2.0mm .08" From Body] Maximum Rating 72 100 30 -30°C to + 85°C -40°C to + 100°C 260°C for 5 Seconds Max. Unit mW mA/°C Part No. LTL2H3FX1K BNS-OD-C131/A4 Page 2 of 10 LITE-ON TECHNOLOGY CORPORATION Property of Lite-On Only Electrical / Optical Characteristics at TA=25°C Parameter Luminous Intensity Viewing Angle Peak Emission Wavelength Dominant Wavelength Spectral Line Half-Width Min. Typ. Max. 4200 15 611 605 17 Unit Test Condition IF = 20mA mcd Note 1,5 deg Note 2 Fig.6 Measurement nm Fig.1 IF = 20mA nm Note 4 Forward Voltage IF = 20mA µA VR = 5V, Note 6 NOTE Luminous intensity is measured with a light sensor and filter combination that approximates the CIE eye-response curve.

PDF Datasheet Preview

LITE-ON TECHNOLOGY CORPORATION

Property of Lite-On Only
* Lead Pb free product RoHS compliant. * Low power consumption. * High efficiency. * Versatile mounting on P.C. board or panel. * I.C. Compatible/low current requirements. * Popular T-13/4 diameter.

Package Dimensions

Part No. LTL2H3FX1K

Lens Water Clear

Source Color AlInGaP Red Orange

Notes All dimensions are in millimeters inches . Tolerance is ±0.25mm .010" unless otherwise noted. Protruded resin under flange is 1.0mm .04" max. Lead spacing is measured where the leads emerge from the package. Specifications are subject to change without notice.

Part No. LTL2H3FX1K BNS-OD-C131/A4

Page 1 of 10

LITE-ON TECHNOLOGY CORPORATION

Property of Lite-On Only

Absolute Maximum Ratings at TA=25°C

Parameter Power Dissipation Peak Forward Current 1/10 Duty Cycle, 0.1ms Pulse Width DC Forward Current Derating Linear From 30°C Operating Temperature Range Storage Temperature Range Lead Soldering Temperature [2.0mm .08" From Body]

Maximum Rating 72 100 30 -30°C to + 85°C -40°C to + 100°C
260°C for 5 Seconds Max.

Unit mW mA/°C

Part No. LTL2H3FX1K BNS-OD-C131/A4

Page 2 of 10

LITE-ON TECHNOLOGY CORPORATION

Property of Lite-On Only

Electrical / Optical Characteristics at TA=25°C

Parameter

Luminous Intensity

Viewing Angle

Peak Emission Wavelength

Dominant Wavelength

Spectral Line Half-Width

Min. Typ. Max. 4200
15 611 605 17

Unit

Test Condition

IF = 20mA mcd

Note 1,5
deg Note 2 Fig.6

Measurement nm

Fig.1 IF = 20mA nm Note 4

Forward Voltage

IF = 20mA
µA VR = 5V, Note 6

NOTE Luminous intensity is measured with a light sensor and filter combination that approximates the CIE eye-response curve.

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived LTL2H3FX1K Datasheet file may be downloaded here without warranties.

Datasheet ID: LTL2H3FX1K 646024