SP720AP

SP720AP Datasheet

SP720

Part	Datasheet
SP720AP	SP720AP (pdf)

Related Parts	Information
SP720AB	SP720AB
SP720ABT	SP720ABT

PDF Datasheet Preview
TVS DIODE ARRAYS TVS Diode Arrays Electronic Protection Array for ESD and Overvoltage Protection SP720 The SP720 is an array of SCR/Diode bipolar structures for ESD and over-voltage protection to sensitive input circuits. The SP720 has 2 protection SCR/Diode device structures per input. A total of 14 available inputs can be used to protect up to 14 external signal or bus lines. Over-voltage protection is from the IN pins 1-7 and 9-15 to V+ or V-. The SCR structures are designed for fast triggering at a threshold of one +VBE diode threshold above V+ Pin 16 or a -VBE diode threshold below V- Pin From an IN input, a clamp to V+ is activated if a transient pulse causes the input to be increased to a voltage level greater than one VBE above V+. A similar clamp to V- is activated if a negative pulse, one VBE less than V-, is applied to an IN input. Standard ESD Human Body Model HBM Capability is: HBM STANDARD MODE C ESD V IEC 61000-4-2 Air 150pF >15kV Direct 150pF >4kV Direct, Dual Pins 150pF >8kV MIL-STD-3015.7 Direct, In-circuit 100pF >15kV Refer to Figure 1 and Table 1 for further detail. Refer to Application Note AN9304 and AN9612 for additional information. Ordering Information PART NO. SP720AP SP720AB SP720ABT TEMP. RANGE oC PACKAGE -40 to 105 16 Ld PDIP -40 to 105 16 Ld SOIC -40 to 105 16 Ld SOIC Tape and Reel PKG. NO. E16.3 M16.15 M16.15 Min. Order 1500 1970 2500 Pinout SP720 PDIP, SOIC TOP VIEW IN 1 IN 2 IN 3 IN 4 IN 5 IN 6 IN 7 V- 8 16 V+ 15 IN 14 IN 13 IN 12 IN 11 IN 10 IN 9 IN • ESD Interface Capability for HBM Standards - MIL STD 15kV - IEC 61000-4-2, Direct Discharge, Single Input 4kV Level 2 Two Inputs in Parallel 8kV Level 4 5 - IEC 61000-4-2, Air Discharge 15kV Level 4 • High Peak Current Capability - IEC 61000-4-5 8/20µs ±3A - Single Pulse, 100µs Pulse Width. ±2A - Single Pulse, 4µs Pulse Width. ±5A • Designed to Provide Over-Voltage Protection - Single-Ended Voltage Range to +30V - Differential Voltage Range to. ±15V • Fast Switching 2ns Risetime • Low Input Leakages 1nA at 25oC Typ • Low Input Capacitance 3pF Typ • An Array of 14 SCR/Diode Pairs • Operating Temperature Range -40oC to 105oC • Microprocessor/Logic Input Protection • Data Bus Protection • Analog Device Input Protection • Voltage Clamp Functional Block Diagram V+ 16 9 - 15 TVS Diode Arrays Electronic Protection Array for ESD and Overvoltage Protection SP720 Absolute Maximum Ratings Thermal Information Continuous Supply Voltage, V+ - V- . +35V

PDF Datasheet Preview

TVS DIODE ARRAYS

TVS Diode Arrays

Electronic Protection Array for ESD and Overvoltage Protection

SP720

The SP720 is an array of SCR/Diode bipolar structures for ESD and over-voltage protection to sensitive input circuits. The SP720 has 2 protection SCR/Diode device structures per input. A total of 14 available inputs can be used to protect up to 14 external signal or bus lines. Over-voltage protection is from the IN pins 1-7 and 9-15 to V+ or V-.

The SCR structures are designed for fast triggering at a threshold of one +VBE diode threshold above V+ Pin 16 or a -VBE diode threshold below V- Pin From an IN input, a clamp to V+ is activated if a transient pulse causes the input to be increased to a voltage level greater than one VBE above V+. A similar clamp to V- is activated if a negative pulse, one VBE less than V-, is applied to an IN input. Standard ESD Human Body Model HBM Capability is:

HBM STANDARD

MODE

C ESD V

IEC 61000-4-2 Air
150pF >15kV

Direct
150pF >4kV

Direct, Dual Pins 150pF >8kV

MIL-STD-3015.7 Direct, In-circuit 100pF >15kV

Refer to Figure 1 and Table 1 for further detail. Refer to Application Note AN9304 and AN9612 for additional information.
Ordering Information

PART NO. SP720AP SP720AB SP720ABT

TEMP. RANGE oC

PACKAGE
-40 to 105
16 Ld PDIP
-40 to 105
16 Ld SOIC
-40 to 105
16 Ld SOIC Tape and Reel

PKG. NO. E16.3 M16.15 M16.15

Min. Order
1500
1970 2500

Pinout

SP720 PDIP, SOIC TOP VIEW

IN 1 IN 2 IN 3 IN 4 IN 5 IN 6 IN 7 V- 8
16 V+ 15 IN 14 IN 13 IN 12 IN 11 IN 10 IN 9 IN
• ESD Interface Capability for HBM Standards - MIL STD 15kV - IEC 61000-4-2, Direct Discharge, Single Input 4kV Level 2

Two Inputs in Parallel 8kV Level 4 5
- IEC 61000-4-2, Air Discharge 15kV Level 4
• High Peak Current Capability - IEC 61000-4-5 8/20µs ±3A - Single Pulse, 100µs Pulse Width. ±2A - Single Pulse, 4µs Pulse Width. ±5A
• Designed to Provide Over-Voltage Protection - Single-Ended Voltage Range to +30V - Differential Voltage Range to. ±15V
• Fast Switching 2ns Risetime
• Low Input Leakages 1nA at 25oC Typ
• Low Input Capacitance 3pF Typ
• An Array of 14 SCR/Diode Pairs
• Operating Temperature Range -40oC to 105oC
• Microprocessor/Logic Input Protection
• Data Bus Protection
• Analog Device Input Protection
• Voltage Clamp

Functional Block Diagram

V+ 16
9 - 15

TVS Diode Arrays

Electronic Protection Array for ESD and Overvoltage Protection

SP720

Absolute Maximum Ratings

Thermal Information

Continuous Supply Voltage, V+ - V- . +35V

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived SP720AP Datasheet file may be downloaded here without warranties.

Datasheet ID: SP720AP 646557