CKY473A7

CKY473A7 Datasheet

CKY473A7

Part	Datasheet
CKY473A7	CKY473A7 (pdf)

PDF Datasheet Preview
CKY473A7 Repair tooling for Rocard covers End cap PCMCIA > Repair > CKY473A7 Order no. CKY473A7 Purpose The CKY473A7 manual tool kit is designed to open Rocard card kits End cap . Tool description The toolkit consists out of a separation tool and a manual drill tool. The separation tool consists out of a position plate, a hole-pattern block, and two lower and upper clamps which can be closed by respectively two ratchet handles and four spring loaded latches. The manual drill tool consists out of a drill chuck and a pump screwdriver. First the card kit that has to be separated has to be placed in the position plate. Then the tool must be closed. Next the lower and upper clamps must be closed. Further the press pegs of the antenna extension can be drilled out by means of the manual drill tool. Herewith the hole pattern block acts as a guiding feature for the drill. Last, the tool must be opened by means of the ratchet handle on the top. Finally the two shields are separated, and the PCB can easily be removed. Remark After separation, top- and bottom cover and top-and bottom shield are damaged and can not be reused anymore. The separation tool CKY473A7 and CKY473A12 doesn't make use of the drill tool. All the process-steps related to the drill operation are not applicable for this tool. General specifications Assembling tool weight 4,5 kg Safety and ergonomics Only well trained people should apply or maintain this tool. Power connections No pneumatic or electrical power required. FCI Electronics Issued 11/05/07

PDF Datasheet Preview

CKY473A7

Repair tooling for Rocard covers End cap

PCMCIA > Repair > CKY473A7 Order no. CKY473A7

Purpose

The CKY473A7 manual tool kit is designed to open Rocard card kits End cap .

Tool description

The toolkit consists out of a separation tool and a manual drill tool. The separation tool consists out of a position plate, a hole-pattern block, and two lower and upper clamps which can be closed by respectively two ratchet handles and four spring loaded latches. The manual drill tool consists out of a drill chuck and a pump screwdriver. First the card kit that has to be separated has to be placed in the position plate. Then the tool must be closed. Next the lower and upper clamps must be closed. Further the press pegs of the antenna extension can be drilled out by means of the manual drill tool. Herewith the hole pattern block acts as a guiding feature for the drill. Last, the tool must be opened by means of the ratchet handle on the top. Finally the two shields are separated, and the PCB can easily be removed.

Remark After separation, top- and bottom cover and top-and bottom shield are damaged and can not be reused anymore. The separation tool CKY473A7 and CKY473A12 doesn't make use of the drill tool. All the process-steps related to the drill operation are not applicable for this tool.

General specifications

Assembling tool weight 4,5 kg

Safety and ergonomics

Only well trained people should apply or maintain this tool.

Power connections

No pneumatic or electrical power required.

FCI Electronics Issued 11/05/07

More datasheets: KFK025821 | KFK025818 | KFK025817 | KFK025789 | 16159 | 17253BK | MDM-31SH004B | DAMM7H2PN | FTLF1318P2BCL | DAMV-15P-N-K127

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived CKY473A7 Datasheet file may be downloaded here without warranties.

Datasheet ID: CKY473A7 635097