P-15KP66CA

P-15KP66CA Datasheet

Part	Datasheet
P-15KP66CA	P-15KP66CA (pdf)

PDF Datasheet Preview
Silicon Avalanche Diodes Unpackaged High Power Transient Voltage Suppressors 15KP CELLS Designed to protect sensitive electronics which operate within an environment of lightning induced, short duration, high current pulses. The 15KP cell series is specifically designed for high power, space limited applications. The cell construction provides three high power T.V.S. die connected in series via heat sinking electrodes. Devices can be soldered to a substrate via one electrode connection to the other electrode can then be made by soldering a suitable jumper. These devices are designed so they can be used in series/parallel configuration in order to provide a very high power capability that is a far superior solution than using Metal Oxide Varistors. The low clamping voltage, high speed response and infinite life if the maximum rating is not exceeded make this ultimate protection for sensitive electronics. • 144,000 watts Peak Pulse Power based on 8/20µS applies to a single device . Devices can be arranged in series/parallel to increase surge handling capability. ABSOLUTE MAXIMUM RATINGS case temp unless otherwise noted SYMBOL PPP PM AV Vf Tj Tstg PARAMETER Peak Pulse Power 8-20µsec. Pulse Steady state power dissipation note 1 Maximum instantaneous forward voltage note 2 Junction Temperature Storage Temperature VALUE 144,000 -55 to 150 -55 to 150 Units W V Note Mounted on copper pad area 40mm square. Note Using 300 microsecond square pulse applies to unidirectional only, and a single device only. For devices used in series, this value should be multiplied by the number of devices. Characteristics case temp unless otherwise noted Part Working Number voltage Breakover Maximum Minimum Maximum Peak Voltage bv leakage clamping Pulse Current current voltage lpp Vcl It Ir Vr Vcl Note 3 volts mA µA volts amps 15KP66CA 66 1500 Note Using pulse as defined by ITU. Other voltages are available on request. Individual 5KP cells also available, please contact sales for details. All dimensions in mm unless otherwise stated

PDF Datasheet Preview

Silicon Avalanche Diodes

Unpackaged High Power Transient Voltage Suppressors
15KP CELLS

Designed to protect sensitive electronics which operate within an environment of lightning induced, short duration, high current pulses.

The 15KP cell series is specifically designed for high power, space limited applications. The cell construction provides three high power T.V.S. die connected in series via heat sinking electrodes.

Devices can be soldered to a substrate via one electrode connection to the other electrode can then be made by soldering a suitable jumper.

These devices are designed so they can be used in series/parallel configuration in order to provide a very high power capability that is a far superior solution than using Metal Oxide Varistors. The low clamping voltage, high speed response and infinite life if the maximum rating is not exceeded make this ultimate protection for sensitive electronics.
• 144,000 watts Peak Pulse Power based on 8/20µS applies to a single device . Devices can be arranged in series/parallel to increase surge handling capability.

ABSOLUTE MAXIMUM RATINGS case temp unless otherwise noted

SYMBOL PPP

PM AV Vf

Tj Tstg

PARAMETER

Peak Pulse Power 8-20µsec. Pulse

Steady state power dissipation note 1

Maximum instantaneous forward voltage note 2

Junction Temperature

Storage Temperature

VALUE 144,000
-55 to 150 -55 to 150

Units W V

Note Mounted on copper pad area 40mm square. Note Using 300 microsecond square pulse applies to unidirectional only, and a single device only. For devices used in series, this value should be multiplied by the number of devices.

Characteristics case temp unless otherwise noted

Part Working Number voltage

Breakover Maximum Minimum Maximum Peak

Voltage bv leakage clamping Pulse Current
current voltage lpp Vcl

It Ir Vr Vcl Note 3
volts mA µA
volts
amps
15KP66CA 66
1500

Note Using pulse as defined by ITU. Other voltages are available on request.

Individual 5KP cells also available, please contact sales for details.

All dimensions in mm unless otherwise stated

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived P-15KP66CA Datasheet file may be downloaded here without warranties.

Datasheet ID: P-15KP66CA 646355