HSDL-3002-007

HSDL-3002-007 Datasheet

HSDL-3002 Data Compliant Low Power kbit/s with Remote Control Transmission Infrared Transceiver

Part	Datasheet
HSDL-3002-007	HSDL-3002-007 (pdf)

PDF Datasheet Preview
HSDL-3002 Data Compliant Low Power kbit/s with Remote Control Transmission Infrared Transceiver Data Sheet The HSDL-3002 is a small form factor single enhanced infrared IR transceiver module that provides the combination of 1 interface between logic and IR signals for through-air, serial, half-duplex IR data link, and 2 IR remote control transmission operating at 940 nm for universal remote control applications. For infrared data communication, the HSDL-3002 provides the flexibility of Low Power SIR applications and remote control applications depending on the application circuit designs as outlined in the Application Circuit section. The transceiver is compliant to IrDA Physical Layer Specifications version from kbit/s to kbit/s and it is IEC 825-Class 1 Eye Safe. The HSDL-3002 can be shutdown completely to achieve very low power consumption. In the shutdown mode, the PIN diode will be inactive and thus producing very little photocurrent even under very bright ambient light. Such features are ideal for battery operated handheld products. • Guaranteed temperature performance, to 70°C Critical parameters are guaranteed over temperature and supply voltage • Low power consumption • Small module size Height mm Width mm Depth mm • Withstands >100 mpV-p power supply ripple typically • VCC supply to volts • Integrated EMI shield • Designed to accommodate light loss with cosmetic windows • IEC 825-class 1 eye safe IrDA Data Features • Fully compliant to IrDA physical layer specifications version from kbit/s to kbit/s Excellent nose-to-nose operation Link distance up to 50 cm • Complete shutdown for TXD IrDA , RXD IrDA , and PIN diode • Low shutdown current 10 nA typical • LED stuck-high protection Remote Control Features • High radiant intensity • Spectrally suited to remote control receiver • Typical link distance at 6 m • Mobile data communication and universal remote control PDAs Mobile phone Application Support Information The Application Engineering Group is available to assist you with the application designs associated with the HSDL-3002 infrared transceiver module. You can contact them through your local sales representatives for additional details. Ordering Information Part Number HSDL-3002-007 Packaging Type Tape and Reel Package Front View Quantity 2500 Marketing Information The unit is marked with a number “1” and “YWWLL” on the shield for front option. Y = year WW = work week LL = lot information VCC CX2 VCC 6 GND 8 RECEIVER REMOTE CONTROL INPUT RCI NC 7 RXD IrDA 4 SD 5 V RC 2 IrDA TXD IrDA 3 HSDL-3002 TRANSMITTER LEDA 1 R1 VCC Figure Functional block diagram of HSDL-3002. SHIELD REAR VIEW 87654321 Figure Rear view diagram with pin-out. I/O Pins Configuration Table Pin Symbol I/O Description LED A I IR and Remote Control LED Anode I Remote Control LED Cathode TXD IrDA I IrDA Transmitter Data Input. Active High RXD IrDA O IrDA Receiver Data Output. Active Low I Shutdown. Active High I Supply Voltage - No internal connection I Connect to system ground SHIELD - EMI Shield Notes Tied through external resistor, R1, to regulate VCC from to Volt Connected to an external switching transistor. Do not float the input pin of the swithcing transistor. Logic high turns on the LED. If held high longer than ~50 µs, the LED is turned off. TXD IrDA must be driven either high or low. DO NOT leave the pin floating. Output is at low pulse response when light pulse is seen. Complete shutdown TXD IrDA , RXD IrDA , and PIN diode Regulated, to Volt

PDF Datasheet Preview

HSDL-3002 Data Compliant Low Power kbit/s with Remote Control Transmission Infrared Transceiver

Data Sheet

The HSDL-3002 is a small form factor single enhanced infrared IR transceiver module that provides the combination of 1 interface between logic and IR signals for through-air, serial, half-duplex IR data link, and 2 IR remote control transmission operating at 940 nm for universal remote control applications.

For infrared data communication, the HSDL-3002 provides the flexibility of Low Power SIR applications and remote control applications depending on the application circuit designs as outlined in the Application Circuit section. The transceiver is compliant to IrDA Physical Layer Specifications version from kbit/s to kbit/s and it is IEC 825-Class 1 Eye Safe.

The HSDL-3002 can be shutdown completely to achieve very low power consumption. In the shutdown mode, the PIN diode will be inactive and thus producing very little photocurrent even under very bright ambient light. Such features are ideal for battery operated handheld products.
• Guaranteed temperature performance, to 70°C Critical parameters are guaranteed over temperature and supply voltage
• Low power consumption
• Small module size Height mm Width mm Depth mm
• Withstands >100 mpV-p power supply ripple typically
• VCC supply to volts
• Integrated EMI shield
• Designed to accommodate light loss with cosmetic windows
• IEC 825-class 1 eye safe

IrDA Data Features
• Fully compliant to IrDA physical layer specifications version from kbit/s to kbit/s Excellent nose-to-nose operation Link distance up to 50 cm
• Complete shutdown for TXD IrDA , RXD IrDA , and PIN diode
• Low shutdown current 10 nA typical
• LED stuck-high protection

Remote Control Features
• High radiant intensity
• Spectrally suited to remote control receiver
• Typical link distance at 6 m
• Mobile data communication and universal remote control PDAs Mobile phone

Application Support Information

The Application Engineering Group is available to assist you with the application designs associated with the HSDL-3002 infrared transceiver module. You can contact them through your local sales representatives for additional details.
Ordering Information

Part Number HSDL-3002-007

Packaging Type Tape and Reel

Package Front View

Quantity 2500

Marketing Information

The unit is marked with a number “1” and “YWWLL” on the shield for front option.

Y = year WW = work week LL = lot information

VCC CX2

VCC 6

GND 8

RECEIVER

REMOTE CONTROL

INPUT RCI

NC 7 RXD IrDA 4

SD 5 V RC 2

IrDA TXD IrDA 3

HSDL-3002

TRANSMITTER

LEDA 1 R1 VCC

Figure Functional block diagram of HSDL-3002.

SHIELD

REAR VIEW 87654321

Figure Rear view diagram with pin-out.

I/O Pins Configuration Table

Pin Symbol I/O Description

LED A

I IR and Remote Control

LED Anode

I Remote Control LED Cathode

TXD IrDA I IrDA Transmitter Data Input.

Active High

RXD IrDA O IrDA Receiver Data Output.

Active Low

I Shutdown. Active High

I Supply Voltage
- No internal connection

I Connect to system ground

SHIELD - EMI Shield

Notes Tied through external resistor, R1, to regulate VCC from to Volt Connected to an external switching transistor. Do not float the input pin of the swithcing transistor. Logic high turns on the LED. If held high longer than ~50 µs, the LED is turned off. TXD IrDA must be driven either high or low. DO NOT leave the pin floating. Output is at low pulse response when light pulse is seen.

Complete shutdown TXD IrDA , RXD IrDA , and PIN diode Regulated, to Volt

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived HSDL-3002-007 Datasheet file may be downloaded here without warranties.

Datasheet ID: HSDL-3002-007 645806