CA07A32-17SBF80

CA07A32-17SBF80 Datasheet

Datasheet for part number CA07A32-17SBF80

Part	Datasheet
CA07A32-17SBF80	CA07A32-17SBF80 (pdf)

PDF Datasheet Preview
Datasheet for part number CA07A32-17SBF80 Our Catalog Part Number CA07A32-17S-B-F80 Our Global Manufacturing Part Number 121662-0049 Brand Cannon Product Category Circular Product Line CA Bayonet Series CA BAYONET Product Datasheet Bayonet Shell Style Gender Shell Size Contact Arrangement Number of contacts Contact Type Contact Plating Contacts installed Shielding Contact Rating at +20 °C 68 °F Size 160/4 Contact Resistance Size 160/4 Operating Voltage Insulator Resistance Test Voltage Air and Creepage Paths Min Ambient Temperature Safety Provisions Salt Spray Resistance Mating Cycles Sep. Force per Contact Size 160/4 Gage Coupling Torque Contact Retention Size 160/4 Shell Material Shell Plating Insulator and Grommet Material Contact Material Harnessing Info Contact Cross-Section Harnessing Info Insulator Diameter Wire Stripping Size 160/4 General Info Connector with bayonet coupling Jam nut receptacle Socket 32-17 4 contacts size 4 AWG Crimp Hard silver not assembled, packed separately no 135 A 0,5 mΩ In case of voltages greater than 50V the connector must be used in accordance with DIN VDE part 410, IEC Acc. To VG95319, part 2, test no. and VG95210, part 32, test conditions B, standard insulator material > 1000 MΩ 2500 Vrms 2,8 mm Standard insulator material -55°/+125°C -67/257°F IP67 and IP68 1 bar pressure after 12 hrs acc. to DIN 40 050 500 hours salt spray resistant 500 min 4,0 N For infos on Gage please see catalog VG95234, part 1 Closing 19 Nm max / Opening 1,03 Nm min 90 N Aluminium alloy Olive drab chromate over cadmium plating conductive CR-Elastomere Copper alloy See assembly instruction See assembly instruction 11,8 mm All tests in accordance with VG95319 and/or if applicable with VG95210 Specifications and dimensions subject to change.

PDF Datasheet Preview

Datasheet for part number CA07A32-17SBF80

Our Catalog Part Number CA07A32-17S-B-F80 Our Global Manufacturing Part Number 121662-0049 Brand Cannon Product Category Circular Product Line CA Bayonet Series CA BAYONET

Product Datasheet Bayonet Shell Style Gender Shell Size Contact Arrangement Number of contacts Contact Type Contact Plating Contacts installed Shielding Contact Rating at +20 °C 68 °F Size 160/4 Contact Resistance Size 160/4

Operating Voltage

Insulator Resistance

Test Voltage Air and Creepage Paths Min Ambient Temperature

Safety Provisions Salt Spray Resistance Mating Cycles Sep. Force per Contact Size 160/4 Gage Coupling Torque Contact Retention Size 160/4 Shell Material Shell Plating Insulator and Grommet Material Contact Material Harnessing Info Contact Cross-Section

Harnessing Info Insulator Diameter Wire Stripping Size 160/4 General Info

Connector with bayonet coupling Jam nut receptacle Socket 32-17 4 contacts size 4 AWG Crimp Hard silver not assembled, packed separately no
135 A
0,5 mΩ In case of voltages greater than 50V the connector must be used in accordance with DIN VDE part 410, IEC Acc. To VG95319, part 2, test no. and VG95210, part 32, test conditions B, standard insulator material > 1000 MΩ 2500 Vrms 2,8 mm Standard insulator material -55°/+125°C -67/257°F IP67 and IP68 1 bar pressure after 12 hrs acc. to DIN 40 050 500 hours salt spray resistant 500 min 4,0 N For infos on Gage please see catalog VG95234, part 1 Closing 19 Nm max / Opening 1,03 Nm min 90 N Aluminium alloy Olive drab chromate over cadmium plating conductive CR-Elastomere Copper alloy

See assembly instruction

See assembly instruction
11,8 mm All tests in accordance with VG95319 and/or if applicable with VG95210

Specifications and dimensions subject to change.

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived CA07A32-17SBF80 Datasheet file may be downloaded here without warranties.

Datasheet ID: CA07A32-17SBF80 639502