MK5811S

MK5811S Datasheet

MK5811

Part	Datasheet
MK5811S	MK5811S (pdf)

Related Parts	Information
MK5811STR	MK5811STR

PDF Datasheet Preview
LOW EMI CLOCK GENERATOR DATASHEET MK5811 The MK5811 device generates a low EMI output clock from a clock or crystal input. The device is designed to dither a high emissions clock to lower EMI in consumer applications. Using IDT’s proprietary mix of analog and digital Phase Locked Loop PLL technology, the device spreads the frequency spectrum of the output and reduces the frequency amplitude peaks by several dB. The MK5811 offers both centered and down spread from a high-speed clock input. For different multiplier configurations, use the MK5812 2x or MK5814 4x . IDT offers many other clocks for computers and computer peripherals. Consult IDT when you need to remove crystals and oscillators from your board. Block Diagram • Packaged in 8-pin SOIC • Available in Pb lead free package • Provides a spread spectrum output clock • Supports flat panel controllers • Accepts a clock or crystal input provides same frequency dithered output • Input frequency range of 4 to 32 MHz • Output frequency range of 4 to 32 MHz • 1X frequency multiplication • Center and down spread • Peak reduction by 8 dB to 16 dB typical on 3rd through 19th odd harmonics • Low EMI feature can be disabled • Operating voltage of V • Advanced, low-power CMOS process • The MK5811A is recommended for new designs. NOTE EOL for non-green parts to occur on 5/13/10 per PDN U-09-01 S1:0 2 Spread Direction FRSEL X1/CLK X2 Clock Buffer/ Crystal Ocsillator The crystal requires external capacitors for accurate tuning of the clock PLL Clock Synthesis and Spread Spectrum Circuitry SSCLK IDT / ICS LOW EMI CLOCK GENERATOR MK5811 MK5811 LOW EMI CLOCK GENERATOR Pin Assignment Spread Direction and Spread Percentage X1/ICLK 1 GND 2 S1 3 S0 4 8 X2 7 VDD 6 FRSEL 5 SSCLK 8-pin 150 mil SOIC Frequency Selection S1 S0 Pin 3 Pin 4 Spread Direction Center No Spread Down Spread Percentage 0 = connect to GND M = unconnected floating 1 = connect directly to VDD Product MK5811 MK58121 MK58141 FRSEL pin 6 Input Freq. Range Multiplier Output Freq. Range to MHz Ordering Information Part / Order Number MK5811S* MK5811STR* MK5811SLF MK5811SLFTR Marking 5811S 5811SL Shipping Packaging Tubes Tape and Reel Tubes Tape and Reel Package 8-pin SOIC 8-pin SOIC 8-pin SOIC 8-pin SOIC Temperature 0 to +85° C 0 to +85° C 0 to +85° C 0 to +85° C *NOTE EOL for non-green parts to occur on 5/13/10 per PDN U-09-01 Parts that are ordered with a "LF" suffix to the part number are the Pb-Free configuration and are RoHS compliant. While the information presented herein has been checked for both accuracy and reliability, Integrated Device Technology, Inc. IDT assumes no responsibility for either its use or for the infringement of any patents or other rights of third parties, which would result from its use. No other circuits, patents, or licenses are implied. This product is intended for use in normal commercial applications. Any other applications such as those requiring extended temperature range, high reliability, or other extraordinary environmental requirements are not recommended without additional processing by IDT. IDT reserves the right to change any circuitry or specifications without notice. IDT does not authorize or warrant any IDT product for use in life support devices or critical medical instruments. IDT / ICS LOW EMI CLOCK GENERATOR MK5811 MK5811 LOW EMI CLOCK GENERATOR SSCG Innovate with IDT and accelerate your future networks. Contact: For Sales 800-345-7015 408-284-8200 Fax 408-284-2775 For Tech Support Corporate Headquarters Integrated Device Technology, Inc. 2006 Integrated Device Technology, Inc. All rights reserved. Product specifications subject to change without notice. IDT and the IDT logo are trademarks of Integrated Device Technology, Inc. Accelerated Thinking is a service mark of Integrated Device Technology, Inc. All other brands, product names and marks are or may be trademarks or registered trademarks used to identify products or services of their respective owners. Printed in USA

PDF Datasheet Preview

LOW EMI CLOCK GENERATOR

DATASHEET

MK5811

The MK5811 device generates a low EMI output clock from a clock or crystal input. The device is designed to dither a high emissions clock to lower EMI in consumer applications. Using IDT’s proprietary mix of analog and digital Phase Locked Loop PLL technology, the device spreads the frequency spectrum of the output and reduces the frequency amplitude peaks by several dB. The MK5811 offers both centered and down spread from a high-speed clock input.

For different multiplier configurations, use the MK5812 2x or MK5814 4x .

IDT offers many other clocks for computers and computer peripherals. Consult IDT when you need to remove crystals and oscillators from your board.

Block Diagram
• Packaged in 8-pin SOIC
• Available in Pb lead free package
• Provides a spread spectrum output clock
• Supports flat panel controllers
• Accepts a clock or crystal input provides same
frequency dithered output
• Input frequency range of 4 to 32 MHz
• Output frequency range of 4 to 32 MHz
• 1X frequency multiplication
• Center and down spread
• Peak reduction by 8 dB to 16 dB typical on 3rd through
19th odd harmonics
• Low EMI feature can be disabled
• Operating voltage of V
• Advanced, low-power CMOS process
• The MK5811A is recommended for new designs.

NOTE EOL for non-green parts to occur on 5/13/10 per PDN U-09-01

S1:0 2 Spread Direction

FRSEL

X1/CLK X2

Clock Buffer/ Crystal Ocsillator

The crystal requires external capacitors for accurate tuning of the clock

PLL Clock Synthesis and Spread Spectrum Circuitry

SSCLK

IDT / ICS LOW EMI CLOCK GENERATOR

MK5811

MK5811 LOW EMI CLOCK GENERATOR

Pin Assignment

Spread Direction and Spread Percentage

X1/ICLK 1 GND 2 S1 3 S0 4
8 X2 7 VDD 6 FRSEL 5 SSCLK
8-pin 150 mil SOIC

Frequency Selection

S1 S0 Pin 3 Pin 4

Spread Direction

Center No Spread Down

Spread Percentage
0 = connect to GND

M = unconnected floating 1 = connect directly to VDD

Product MK5811 MK58121 MK58141

FRSEL pin 6

Input Freq. Range

Multiplier

Output Freq. Range
to MHz
Ordering Information

Part / Order Number

MK5811S* MK5811STR* MK5811SLF MK5811SLFTR

Marking
5811S 5811SL

Shipping Packaging

Tubes Tape and Reel

Tubes Tape and Reel

Package
8-pin SOIC 8-pin SOIC 8-pin SOIC 8-pin SOIC

Temperature
0 to +85° C 0 to +85° C 0 to +85° C 0 to +85° C
*NOTE EOL for non-green parts to occur on 5/13/10 per PDN U-09-01 Parts that are ordered with a "LF" suffix to the part number are the Pb-Free configuration and are RoHS compliant.

While the information presented herein has been checked for both accuracy and reliability, Integrated Device Technology, Inc. IDT assumes no responsibility for either its use or for the infringement of any patents or other rights of third parties, which would result from its use. No other circuits, patents, or licenses are implied. This product is intended for use in normal commercial applications. Any other applications such as those requiring extended temperature range, high reliability, or other extraordinary environmental requirements are not recommended without additional processing by IDT. IDT reserves the right to change any circuitry or specifications without notice. IDT does not authorize or warrant any IDT product for use in life support devices or critical medical instruments.

IDT / ICS LOW EMI CLOCK GENERATOR

MK5811

MK5811 LOW EMI CLOCK GENERATOR

SSCG

Innovate with IDT and accelerate your future networks. Contact:

For Sales
800-345-7015 408-284-8200 Fax 408-284-2775

For Tech Support

Corporate Headquarters

Integrated Device Technology, Inc.
2006 Integrated Device Technology, Inc. All rights reserved. Product specifications subject to change without notice. IDT and the IDT logo are trademarks of Integrated Device Technology, Inc. Accelerated Thinking is a service mark of Integrated Device Technology, Inc. All other brands, product names and marks are or may be trademarks or registered trademarks used to identify products or services of their respective owners. Printed in USA

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived MK5811S Datasheet file may be downloaded here without warranties.

Datasheet ID: MK5811S 637481