854210CYLFT

854210CYLFT Datasheet

ICS854210

Part	Datasheet
854210CYLFT	854210CYLFT (pdf)

Related Parts	Information
ICS854210CYLF	ICS854210CYLF

PDF Datasheet Preview
LOW SKEW, DUAL, 1-TO-5 DIFFERENTIALTO-LVDS FANOUT BUFFER ICS854210 The ICS854210 is a low skew, high performance dual 1-to- 5 Differential-to-LVDS Fanout Buffer HiPerClockS and a member of the HiPerClockS family of High Perfor mance Clock Solutions from IDT. The ICS854210 is character ized to operate from a 3.3V power supply. Guaranteed output and par t- to-par t skew characteristics make the ICS854210 ideal for those clock distribution applications demanding well defined perfor mance and repeatability. • Two differential LVDS bank outputs • Two differential LVPECL clock input pairs • PCLKx, nPCLKx pairs can accept the following differential input levels LVPECL, LVDS, CML, SSTL • Maximum output frequency 2GHz • Translates any single ended input signal to LVDS levels with resistor bias on nPCLKx input • Output skew TBD • Part-to-part skew TBD • Propagation delay 280ps typical • 3.3V supply voltage • -40°C to 85°C ambient operating temperature • Available in both standard RoHS 5 and lead-free RoHS 6 packages BLOCK DIAGRAM PIN ASSIGNMENT QA3 nQA3 QA4 nQA4 QB0 nQB0 QB1 nQB1 PCLKA Pulldown nPCLKA Pullup/Pulldown PCLKB Pulldown nPCLKB Pullup/Pulldown QA0 nQA0 QA1 nQA1 QA2 nQA2 QA3 nQA3 QA4 nQA4 QB0 nQB0 QB1 nQB1 QB2 nQB2 QB3 nQB3 QB4 nQB4 VDDO nQA2 QA2 nQA1 QA1 nQA0 QA0 VDDO 24 23 22 21 20 19 18 17 28 ICS854210 13 1234 56 78 VDDO QB2 nQB2 QB3 nQB3 QB4 nQB4 VDDO VDD nc PCLKA nPCLKA nc PCLKB nPCLKB TABLE ORDERING INFORMATION Part/Order Number Marking Package Shipping Packaging Temperature ICS854210CY ICS854210CY 32 lead LQFP tray -40°C to 85°C ICS854210CYT ICS854210CY 32 lead LQFP 1000 tape & reel -40°C to 85°C ICS854210CYLF ICS854210CYL 32 Lead "Lead-Free" LQFP tray -40°C to 85°C ICS854210CYLFT ICS854210CYL 32 Lead "Lead-Free" LQFP 1000 tape & reel -40°C to 85°C NOTE Parts that are ordered with an "LF" suffix to the part number are the Pb-Free configuration and are RoHS compliant. While the information presented herein has been checked for both accuracy and reliability, Integrated Device Technology, Incorporated IDT assumes no responsibility for either its use or for infringement of any patents or other rights of third parties, which would result from its use. No other circuits, patents, or licenses are implied. This product is intended for use in normal commercial and industrial applications. Any other applications such as those requiring high reliability or other extraordinary environmental requirements are not recommended without additional processing by IDT. IDT reserves the right to change any circuitry or specifications without notice. IDT does not authorize or warrant any IDT product for use in life support devices or critical medical instruments. IDT / ICS LVDS FANOUT BUFFER ICS854210 LOW SKEW, DUAL, 1-TO-5 DIFFERENTIAL-TO-LVDS FANOUT BUFFER Innovate with IDT and accelerate your future networks. Contact: For Sales 800-345-7015 inside USA +408-284-8200 outside USA Fax 408-284-2775 For Tech Support +480-763-2056 Corporate Headquarters Integrated Device Technology, Inc. 6024 Silver Creek Valley Road San Jose, CA 95138 United States 800-345-7015 inside USA +408-284-8200 outside USA 2007 Integrated Device Technology, Inc. All rights reserved. Product specifications subject to change without notice. IDT, the IDT logo, ICS and HiPerClockS are trademarks of Integrated Device Technology, Inc. Accelerated Thinking is a service mark of Integrated Device Technology, Inc. All other brands, product names and marks are or may be trademarks or registered trademarks used to identify products or services of their respective owners. Printed in USA

PDF Datasheet Preview

LOW SKEW, DUAL, 1-TO-5 DIFFERENTIALTO-LVDS FANOUT BUFFER

ICS854210

The ICS854210 is a low skew, high performance
dual 1-to- 5 Differential-to-LVDS Fanout Buffer

HiPerClockS and a member of the HiPerClockS family of

High Perfor mance Clock Solutions from IDT.

The ICS854210 is character ized to operate
from a 3.3V power supply. Guaranteed output and par t-
to-par t skew characteristics make the ICS854210 ideal for
those clock distribution applications demanding well
defined perfor mance and repeatability.
• Two differential LVDS bank outputs
• Two differential LVPECL clock input pairs
• PCLKx, nPCLKx pairs can accept the following differential input levels LVPECL, LVDS, CML, SSTL
• Maximum output frequency 2GHz
• Translates any single ended input signal to LVDS levels with resistor bias on nPCLKx input
• Output skew TBD
• Part-to-part skew TBD
• Propagation delay 280ps typical
• 3.3V supply voltage
• -40°C to 85°C ambient operating temperature
• Available in both standard RoHS 5 and lead-free RoHS 6 packages

BLOCK DIAGRAM

PIN ASSIGNMENT

QA3 nQA3 QA4 nQA4 QB0 nQB0 QB1 nQB1

PCLKA Pulldown nPCLKA Pullup/Pulldown

PCLKB Pulldown nPCLKB Pullup/Pulldown

QA0 nQA0 QA1 nQA1

QA2 nQA2

QA3 nQA3 QA4 nQA4

QB0 nQB0 QB1 nQB1

QB2 nQB2

QB3 nQB3 QB4 nQB4

VDDO nQA2 QA2 nQA1 QA1 nQA0 QA0 VDDO
24 23 22 21 20 19 18 17
28 ICS854210 13
1234 56 78

VDDO QB2 nQB2 QB3 nQB3 QB4 nQB4 VDDO

VDD nc

PCLKA nPCLKA
nc PCLKB nPCLKB
TABLE ORDERING INFORMATION

Part/Order Number

Marking

Package

Shipping Packaging Temperature

ICS854210CY

ICS854210CY
32 lead LQFP
tray
-40°C to 85°C

ICS854210CYT

ICS854210CY
32 lead LQFP
1000 tape & reel -40°C to 85°C

ICS854210CYLF

ICS854210CYL
32 Lead "Lead-Free" LQFP
tray
-40°C to 85°C

ICS854210CYLFT

ICS854210CYL
32 Lead "Lead-Free" LQFP
1000 tape & reel
-40°C to 85°C

NOTE Parts that are ordered with an "LF" suffix to the part number are the Pb-Free configuration and are RoHS compliant.

While the information presented herein has been checked for both accuracy and reliability, Integrated Device Technology, Incorporated IDT assumes no responsibility for either its use or for infringement of any patents or other rights of third parties, which would result from its use. No other circuits, patents, or licenses are implied. This product is intended for use in normal commercial and industrial applications. Any other applications such as those requiring high reliability or other extraordinary environmental requirements are not recommended without additional processing by IDT. IDT reserves the right to change any circuitry or specifications without notice. IDT does not authorize or warrant any IDT product for use in life support devices or critical medical instruments.

IDT / ICS LVDS FANOUT BUFFER

ICS854210 LOW SKEW, DUAL, 1-TO-5 DIFFERENTIAL-TO-LVDS FANOUT BUFFER

Innovate with IDT and accelerate your future networks. Contact:

For Sales
800-345-7015 inside USA +408-284-8200 outside USA Fax 408-284-2775

For Tech Support
+480-763-2056

Corporate Headquarters

Integrated Device Technology, Inc. 6024 Silver Creek Valley Road San Jose, CA 95138 United States 800-345-7015 inside USA +408-284-8200 outside USA
2007 Integrated Device Technology, Inc. All rights reserved. Product specifications subject to change without notice. IDT, the IDT logo, ICS and HiPerClockS are trademarks of Integrated Device Technology, Inc. Accelerated Thinking is a service mark of Integrated Device Technology, Inc. All other brands, product names and marks are or may be trademarks or registered trademarks used to identify products or services of their respective owners. Printed in USA

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived 854210CYLFT Datasheet file may be downloaded here without warranties.

Datasheet ID: 854210CYLFT 637177