ICS853058AGLF

ICS853058AGLF Datasheet

he ICS853058 is an 8:1 Differential-to-3.3V or 2.5V

Part	Datasheet
ICS853058AGLF	ICS853058AGLF (pdf)

Related Parts	Information
ICS853058AGLFT	ICS853058AGLFT

PDF Datasheet Preview
8:1, DIFFERENTIAL-TO-3.3V or 2.5V LVPECL/ECL CLOCK MULTIPLEXER he ICS853058 is an 8:1 Differential-to-3.3V or 2.5V LVPECL / ECL Clock Multiplexer which can operate HiPerClockS up to 2.8GHz and is a member of the HiPerClockS family of High Performance Clock Solutions from IDT. The ICS853058 has 8 differential selectable clock inputs. The PCLK, nPCLK input pairs can accept LVPECL, LVDS, CML or SSTL levels. The fully differential architecture and low propagation delay make it ideal for use in clock distribution circuits. The select pins have internal pulldown resistors. The SEL2 pin is the most significant bit and the binary number applied to the select pins will select the same numbered data input i.e., 000 selects PCLK0, nPCLK0 . ICS853058 • High speed 8:1 differential muliplexer • One differential 3.3V or 2.5V LVPECL output • Eight selectable differential PCLKx/nPCLKx input pairs • Differential PCLKx/nPCLKx pairs can accept the following interface levels LVPECL, LVDS, CML, SSTL • Maximum output frequency 2.8GHz • Translates any single ended input signal to LVPECL levels with resistor bias on nPCLKx input • RMS phase jitter 155.52MHz 0.212ps typical • Part-to-part skew 325ps maximum • Propagation delay 450ps maximum • LVPECL mode operating voltage supply range: VCC = 2.375V to 3.465V, VEE = 0V • ECL mode operating voltage supply range: VCC = 0V, VEE = -3.465V to -2.375V • -40°C to 85°C ambient operating temperature • Available in both standard RoHS 5 and lead-free RoHS 6 packages Block Diagram PCLK0 Pulldown nPCLK0 Pullup/Pulldown PCLK1 Pulldown nPCLK1 Pullup/Pulldown PCLK2 Pulldown nPCLK2 Pullup/Pulldown PCLK3 Pulldown nPCLK3 Pullup/Pulldown PCLK0 Pulldown nPCLK0 Pullup/Pulldown PCLK1 Pulldown nPCLK1 Pullup/Pulldown PCLK2 Pulldown nPCLK2 Pullup/Pulldown 100 101 110 PCLK3 Pulldown nPCLK3 Pullup/Pulldown Pin Assignment PCLK0 1 nPCLK0 2 PCLK1 3 nPCLK1 4 VCC 5 SEL0 6 SEL1 7 SEL2 8 PCLK2 9 nPCLK2 10 PCLK3 11 nPCLK3 12 24 PCLK7 23 nPCLK7 22 PCLK6 21 nPCLK6 20 VCC 19 Q 18 nQ 17 VEE Ordering Information Table Ordering Information Part/Order Number ICS853058AG ICS853058AGT ICS853058AGLF ICS853058AGLFT Marking ICS853058AG ICS853058AGL Package 24 Lead TSSOP 24 Lead TSSOP “Lead-Free” 24 Lead TSSOP “Lead-Free” 24 Lead TSSOP Shipping Packaging Tube 2500 Tape & Reel Tube 2500 Tape & Reel Temperature -40°C to 85°C -40°C to 85°C -40°C to 85°C -40°C to 85°C NOTE Parts that are ordered with an "LF" suffix to the part number are the Pb-Free configuration and are RoHS compliant. While the information presented herein has been checked for both accuracy and reliability, Integrated Device Technology IDT assumes no responsibility for either its use or for the infringement of any patents or other rights of third parties, which would result from its use. No other circuits, patents, or licenses are implied. This product is intended for use in normal commercial and industrial applications. Any other applications, such as those requiring high reliability or other extraordinary environmental requirements are not recommended without additional processing by IDT. IDT reserves the right to change any circuitry or specifications without notice. IDT does not authorize or warrant any IDT product for use in life support devices or critical medical instruments. IDT / ICS 3.3V OR 2.5V LVPECL/ECL CLOCK MULTIPLEXER ICS853058 8:1, DIFFERENTIAL-TO-3.3V OR 2.5V LVPECL/ECL CLOCK MULTIPLEXER Table Page Description of Change T4D T9 ECL DC Characteristics Table - correct VPP unit of measure from mV to V. 16 Ordering Information Table - added Lead-Free part number. Date 5/12/08 IDT / ICS 3.3V OR 2.5V LVPECL/ECL CLOCK MULTIPLEXER ICS853058 8:1, DIFFERENTIAL-TO-3.3V OR 2.5V LVPECL/ECL CLOCK MULTIPLEXER Contact Information: Sales 800-345-7015 inside USA +408-284-8200 outside USA Fax 408-284-2775 Technical Support +480-763-2056 Corporate Headquarters Integrated Device Technology, Inc. 6024 Silver Creek Valley Road San Jose, CA 95138 United States 800-345-7015 inside USA +408-284-8200 outside USA 2008 Integrated Device Technology, Inc. All rights reserved. Product specifications subject to change without notice. IDT and the IDT logo are trademarks of Integrated Device Technology, Inc. Accelerated Thinking is a service mark of Integrated Device Technology, Inc. All other brands, product names and marks are or may be trademarks or registered trademarks used to identify products or services of their respective owners. Printed in USA

PDF Datasheet Preview

8:1, DIFFERENTIAL-TO-3.3V or 2.5V LVPECL/ECL CLOCK MULTIPLEXER
he ICS853058 is an 8:1 Differential-to-3.3V or 2.5V

LVPECL / ECL Clock Multiplexer which can operate

HiPerClockS up to 2.8GHz and is a member of the HiPerClockS
family of High Performance Clock Solutions from

IDT. The ICS853058 has 8 differential selectable
clock inputs. The PCLK, nPCLK input pairs can accept LVPECL,

LVDS, CML or SSTL levels. The fully differential architecture and
low propagation delay make it ideal for use in clock distribution
circuits. The select pins have internal pulldown resistors. The

SEL2 pin is the most significant bit and the binary number applied
to the select pins will select the same numbered data input i.e.,
000 selects PCLK0, nPCLK0 .

ICS853058
• High speed 8:1 differential muliplexer
• One differential 3.3V or 2.5V LVPECL output
• Eight selectable differential PCLKx/nPCLKx input pairs
• Differential PCLKx/nPCLKx pairs can accept the following
interface levels LVPECL, LVDS, CML, SSTL
• Maximum output frequency 2.8GHz
• Translates any single ended input signal to LVPECL levels with
resistor bias on nPCLKx input
• RMS phase jitter 155.52MHz 0.212ps typical
• Part-to-part skew 325ps maximum
• Propagation delay 450ps maximum
• LVPECL mode operating voltage supply range:

VCC = 2.375V to 3.465V, VEE = 0V
• ECL mode operating voltage supply range:

VCC = 0V, VEE = -3.465V to -2.375V
• -40°C to 85°C ambient operating temperature
• Available in both standard RoHS 5 and lead-free RoHS 6
packages

Block Diagram

PCLK0 Pulldown nPCLK0 Pullup/Pulldown

PCLK1 Pulldown
nPCLK1 Pullup/Pulldown

PCLK2 Pulldown
nPCLK2 Pullup/Pulldown

PCLK3 Pulldown nPCLK3 Pullup/Pulldown

PCLK0 Pulldown nPCLK0 Pullup/Pulldown

PCLK1 Pulldown nPCLK1 Pullup/Pulldown

PCLK2 Pulldown nPCLK2 Pullup/Pulldown
100 101 110

PCLK3 Pulldown nPCLK3 Pullup/Pulldown

Pin Assignment

PCLK0 1 nPCLK0 2

PCLK1 3 nPCLK1 4

VCC 5 SEL0 6 SEL1 7 SEL2 8 PCLK2 9 nPCLK2 10 PCLK3 11 nPCLK3 12
24 PCLK7 23 nPCLK7 22 PCLK6 21 nPCLK6 20 VCC 19 Q 18 nQ 17 VEE
Ordering Information
Table Ordering Information

Part/Order Number ICS853058AG ICS853058AGT ICS853058AGLF ICS853058AGLFT

Marking ICS853058AG ICS853058AGL

Package 24 Lead TSSOP 24 Lead TSSOP “Lead-Free” 24 Lead TSSOP “Lead-Free” 24 Lead TSSOP

Shipping Packaging Tube
2500 Tape & Reel Tube
2500 Tape & Reel

Temperature -40°C to 85°C -40°C to 85°C -40°C to 85°C -40°C to 85°C

NOTE Parts that are ordered with an "LF" suffix to the part number are the Pb-Free configuration and are RoHS compliant.

While the information presented herein has been checked for both accuracy and reliability, Integrated Device Technology IDT assumes no responsibility for either its use or for the infringement of any patents or other rights of third parties, which would result from its use. No other circuits, patents, or licenses are implied. This product is intended for use in normal commercial and industrial applications. Any other applications, such as those requiring high reliability or other extraordinary environmental requirements are not recommended without additional processing by IDT. IDT reserves the right to change any circuitry or specifications without notice. IDT does not authorize or warrant any IDT product for use in life support devices or critical medical instruments.

IDT / ICS 3.3V OR 2.5V LVPECL/ECL CLOCK MULTIPLEXER

ICS853058 8:1, DIFFERENTIAL-TO-3.3V OR 2.5V LVPECL/ECL CLOCK MULTIPLEXER

Table

Page Description of Change

T4D T9

ECL DC Characteristics Table - correct VPP unit of measure from mV to V.
16 Ordering Information Table - added Lead-Free part number.

Date 5/12/08

IDT / ICS 3.3V OR 2.5V LVPECL/ECL CLOCK MULTIPLEXER

ICS853058 8:1, DIFFERENTIAL-TO-3.3V OR 2.5V LVPECL/ECL CLOCK MULTIPLEXER

Contact Information:

Sales
800-345-7015 inside USA +408-284-8200 outside USA Fax 408-284-2775

Technical Support
+480-763-2056

Corporate Headquarters

Integrated Device Technology, Inc. 6024 Silver Creek Valley Road San Jose, CA 95138 United States 800-345-7015 inside USA +408-284-8200 outside USA
2008 Integrated Device Technology, Inc. All rights reserved. Product specifications subject to change without notice. IDT and the IDT logo are trademarks of Integrated Device Technology, Inc. Accelerated Thinking is a service mark of Integrated Device Technology, Inc. All other brands, product names and marks are or may be trademarks or registered trademarks used to identify products or services of their respective owners. Printed in USA

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived ICS853058AGLF Datasheet file may be downloaded here without warranties.

Datasheet ID: ICS853058AGLF 637158