V23818-M305-L57

V23818-M305-L57 Datasheet

V23818-M305-L57 *

Part	Datasheet
V23818-M305-L57	V23818-M305-L57 (pdf)

PDF Datasheet Preview
Dimensions in mm [inches] V23818-M305-L57 * Small Form Factor Multimode 850 nm and GBd Fibre Channel 2x5 Transceiver with LC Connector V23818-M305-L57 Fiber Optics * Ordering Information Input Output Signal detect Voltage Part number V V23818-M305-L57 LC is a trademark of Lucent AUGUST 2001 FEATURES • Small Form Factor transceiver • Full compliant with Fibre Channel • Data rate autonegotiation between and GBd • Excellent EMI performance • RJ-45 style LC connector system • Half the size of SC Duplex 1x9 transceiver • Single power supply V • Extremely low power consumption of 445 mW typical • PECL and LVPECL differential inputs and outputs • System optimized for µm graded index fiber • Multisource 2x5 footprint • Small size for high port density • UL-94 V-0 certified • ESD Class 1 per MIL-STD 883D Method • Compliant with FCC Class B and EN 55022 • For distances of up to 300 m • Class 1 FDA and IEC laser safety compliant • AC/AC coupling in accordance to SFF MSA Absolute Maximum Ratings Exceeding any one of these values may destroy the device immediately. Package Power W Data Input Levels PECL V Differential Data Input Voltage V Operating Case to 85° C Storage Ambient Temperature............................. C to 85°C Soldering Conditions, Temp/Time MIL-STD 883C, Method 2003 250°C/ s VCC V ECL-Output current data mA The Infineon Fibre Channel multimode transceiver part of Infineon Small Form Factor transceiver family is based on the Physical Medium Depend PMD sublayer and baseband medium, type short wavelength , Fibre Channel DC 200-M5-SN-I and 200-M6-SN-I, DC 100-M5-SN-I and 100-M6-SN-I. The appropriate fiber optic cable is µm or 50 µm multimode fiber with LC connector. Operating range over each optical fiber type at GBd Fiber type Minimum range meters Typ. micron MMF to 150 micron MMF to 300 Operating range over each optical fiber type at GBd Fiber type micron MMF micron MMF Minimum range meters Typ. to 300 to 550 The Infineon Fibre Channel multimode transceiver is a single unit comprised of a transmitter, a receiver, and an LC receptacle. This design frees the customer from many alignment and PC board layout concerns. This transceiver supports the LC connectorization concept. It is compatible with RJ-45 style backpanels for high end Data Com and Telecom applications while providing the advantages of fiber optic technology. The module is designed for low cost SAN, LAN, WAN, Fibre Channel applications. It can be used as the network end device interface in mainframes, workstations, servers, and storage devices, and in a broad range of network devices such as bridges, routers, hubs, and local and wide area switches. This transceiver operates at / Gbit/s from a single power supply V . The full differential data inputs and outputs are PECL and LVPECL compatible. Functional Description of 2x5 Pin Row Transceiver This transceiver is designed to transmit serial data via multimode cable. Functional Diagram TxDis TD− TD+ Automatic Shut-Down Laser Driver Laser Coupling Unit e/o Laser RD− RD+ SD Power Control Monitor Receiver

PDF Datasheet Preview

Dimensions in mm [inches]

V23818-M305-L57 *

Small Form Factor Multimode 850 nm and GBd Fibre Channel
2x5 Transceiver with LC Connector

V23818-M305-L57

Fiber Optics
* Ordering Information

Input Output Signal detect Voltage Part number

V V23818-M305-L57

LC is a trademark of Lucent AUGUST 2001

FEATURES
• Small Form Factor transceiver
• Full compliant with Fibre Channel
• Data rate autonegotiation between and GBd
• Excellent EMI performance
• RJ-45 style LC connector system
• Half the size of SC Duplex 1x9 transceiver
• Single power supply V
• Extremely low power consumption of 445 mW typical
• PECL and LVPECL differential inputs and outputs
• System optimized for µm graded index fiber
• Multisource 2x5 footprint
• Small size for high port density
• UL-94 V-0 certified
• ESD Class 1 per MIL-STD 883D Method
• Compliant with FCC Class B and EN 55022
• For distances of up to 300 m
• Class 1 FDA and IEC laser safety compliant
• AC/AC coupling in accordance to SFF MSA

Absolute Maximum Ratings

Exceeding any one of these values may destroy the device immediately.

Package Power W Data Input Levels PECL V Differential Data Input Voltage V Operating Case to 85° C Storage Ambient Temperature............................. C to 85°C Soldering Conditions, Temp/Time

MIL-STD 883C, Method 2003 250°C/ s VCC V ECL-Output current data mA

The Infineon Fibre Channel multimode transceiver part of Infineon Small Form Factor transceiver family is based on the Physical Medium Depend PMD sublayer and baseband medium, type short wavelength , Fibre Channel DC 200-M5-SN-I and 200-M6-SN-I, DC 100-M5-SN-I and 100-M6-SN-I.

The appropriate fiber optic cable is µm or 50 µm multimode fiber with LC connector.

Operating range over each optical fiber type at GBd

Fiber type

Minimum range meters Typ.
micron MMF
to 150
micron MMF
to 300

Operating range over each optical fiber type at GBd

Fiber type micron MMF micron MMF

Minimum range meters Typ.
to 300
to 550

The Infineon Fibre Channel multimode transceiver is a single unit comprised of a transmitter, a receiver, and an LC receptacle. This design frees the customer from many alignment and PC board layout concerns.

This transceiver supports the LC connectorization concept. It
is compatible with RJ-45 style backpanels for high end Data Com and Telecom applications while providing the advantages of fiber optic technology.

The module is designed for low cost SAN, LAN, WAN, Fibre Channel applications. It can be used as the network end device interface in mainframes, workstations, servers, and storage devices, and in a broad range of network devices such as bridges, routers, hubs, and local and wide area switches.

This transceiver operates at / Gbit/s from a single power supply V . The full differential data inputs and outputs are PECL and LVPECL compatible.

Functional Description of 2x5 Pin Row Transceiver

This transceiver is designed to transmit serial data via multimode cable.

Functional Diagram

TxDis

TD− TD+

Automatic Shut-Down

Laser Driver

Laser Coupling Unit
e/o Laser

RD− RD+ SD

Power Control

Monitor

Receiver

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived V23818-M305-L57 Datasheet file may be downloaded here without warranties.

Datasheet ID: V23818-M305-L57 638856