TDA21201-P7

TDA21201-P7 Datasheet

TDA21201

Part	Datasheet
TDA21201-P7	TDA21201-P7 (pdf)

Related Parts	Information
TDA21201B7T	TDA21201B7T
TDA21201-S7	TDA21201-S7
TDA21201-B7	TDA21201-B7
TDA21201P7	TDA21201P7

PDF Datasheet Preview
Preliminary Data Sheet TDA21201 Integrated Switch MOSFET Driver and MOSFETs • Replaces with one part only the semiconductors of a DC/DC power stage for a 12 V à 1 V conversion: FET driver + High side FET + Low side FET • Raises the efficiency by reducing static and dynamic losses beyond 85 % due to optimized MOSFETs and Driver • Reduces overall part count and board space consumption P-TO220-7-3 • Simplifies and shortens the circuit design and the layout • Eliminates the need for external bootstrap components • Provides simplest overall output current scalability • Protects the Driver and the MOSFETs against overtemperature and shoot-through problems Vcc à Gnd • Achieves the lowest thermal resistance Rthjc and Rthja • Uses the well-known, easy-to-assemble and robust P-TO220-7-230 standard TO-220 and TO-263 package • Requires no separate supply voltage to operate except 12 V • Three state input to enable a shut down mode to turn off both MOSFETs • Compatible with standard 2-, 3-, 4-, 6-phase PWM controller ICs • Ideal for compact, highly-efficient, multi-phase voltage P-TO263-7-2 regulators on motherboards and VRMs Type TDA21201-P7 TDA21201-S7 TDA21201-B7 Package Marking TO-220-7-3 21201P7 TO-220-7-230 21201S7 TO-263-7-2 21201B7 Ordering Code Q67042-S4100 Q67042-S4101 Q67042-S4099 Pin Configuration and Function Pin number 1,2,3 4/tab 5 6,7 Pin name GND VOUT IN VCC Pin description Ground Output voltage from common node of the MOSFETs Input signal from PWM controller Supply voltage to MOSFETs and Driver IC The Integrated Switch TDA21201 incorporates an intelligent MOSFET driver and two Power MOSFETs in a single package to form a fully integrated and optimized power stage of a DC/DC synchronous buck converter including the bootstrap components for the high-side MOSFET. The Power MOSFETs are optimized for lowest static and dynamic losses for a 12 V to sub-3.5 V conversion and can handle up to 30 A output current. The TDA21201 is manufactured in state-of-the-art multi-chip assembly using a low-Rth 7-Pin Apr-29, 2002 Preliminary Data Sheet TDA21201 TO-220 package or its associated SMD counterpart TO-263 and latest chip technologies. Block Diagram = 12 V Pin 6-7 to PWM IC Pin 5 FET Drive Circuitry High side FET VOUT Low side FET to output inductor Pin 4/tab Pin 1-3 Absolute Maximum Ratings At Tj = 25 °C, unless otherwise specified Parameter Symbol Value Unit Min. Max. Peak voltage supplied to ‘VCC’ pins Peak voltage supplied to ‘IN’ pin, DIN_Peak < 10 % VCC_PEAK -5 10 V Peak voltage at ‘Vout’ pin to GND VOUT_PK -5 20* Maximum DC output current, VCC = 12 V, VOUT V Junction temperature Storage temperature Lead temperature TO-263 MSL1, IPC/JEDEC J-STD-020A IOUT_MAX -10 30 A -55 150 225 °C Lead temperature TO-220 soldering, 10 seconds ESD rating Human body model TL ESD IEC climatic category DIN EN 60068-1 55/150/56 - * The positive peak voltage = the voltage overshoot during switching transients at the VCC pins and the OUT pin/tab is limited by the Integrated Switch itself pls., see the “Over-voltage protection of VCC” paragraph Thermal Characteristic Parameter Thermal resistance, junctions-case Thermal resistance, junctions-ambient, leaded

PDF Datasheet Preview

Preliminary Data Sheet

TDA21201

Integrated Switch

MOSFET Driver and MOSFETs
• Replaces with one part only the semiconductors of a DC/DC power stage for a 12 V à 1 V conversion:

FET driver + High side FET + Low side FET
• Raises the efficiency by reducing static and dynamic losses
beyond 85 % due to optimized MOSFETs and Driver
• Reduces overall part count and board space consumption P-TO220-7-3
• Simplifies and shortens the circuit design and the layout
• Eliminates the need for external bootstrap components
• Provides simplest overall output current scalability
• Protects the Driver and the MOSFETs against overtemperature and shoot-through problems Vcc à Gnd
• Achieves the lowest thermal resistance Rthjc and Rthja
• Uses the well-known, easy-to-assemble and robust

P-TO220-7-230
standard TO-220 and TO-263 package
• Requires no separate supply voltage to operate except 12 V
• Three state input to enable a shut down mode to turn off
both MOSFETs
• Compatible with standard 2-, 3-, 4-, 6-phase PWM controller ICs
• Ideal for compact, highly-efficient, multi-phase voltage

P-TO263-7-2
regulators on motherboards and VRMs

Type TDA21201-P7 TDA21201-S7 TDA21201-B7

Package

Marking

TO-220-7-3 21201P7

TO-220-7-230 21201S7

TO-263-7-2 21201B7
Ordering Code Q67042-S4100 Q67042-S4101 Q67042-S4099

Pin Configuration and Function

Pin number 1,2,3 4/tab 5 6,7

Pin name GND VOUT IN VCC

Pin description Ground Output voltage from common node of the MOSFETs Input signal from PWM controller Supply voltage to MOSFETs and Driver IC

The Integrated Switch TDA21201 incorporates an intelligent MOSFET driver and two Power MOSFETs in a single package to form a fully integrated and optimized power stage of a DC/DC synchronous buck converter including the bootstrap components for the high-side MOSFET. The Power MOSFETs are optimized for lowest static and dynamic losses for a 12 V to sub-3.5 V conversion and can handle up to 30 A output current. The TDA21201 is manufactured in state-of-the-art multi-chip assembly using a low-Rth 7-Pin

Apr-29, 2002

Preliminary Data Sheet

TDA21201

TO-220 package or its associated SMD counterpart TO-263 and latest chip technologies.

Block Diagram
= 12 V Pin 6-7
to PWM IC Pin 5

FET Drive Circuitry

High side FET

VOUT

Low side FET
to output inductor Pin 4/tab

Pin 1-3

Absolute Maximum Ratings

At Tj = 25 °C, unless otherwise specified

Parameter

Symbol Value Unit Min. Max.

Peak voltage supplied to ‘VCC’ pins Peak voltage supplied to ‘IN’ pin, DIN_Peak < 10 %

VCC_PEAK
-5 10 V

Peak voltage at ‘Vout’ pin to GND

VOUT_PK -5 20*

Maximum DC output current, VCC = 12 V, VOUT V Junction temperature Storage temperature Lead temperature TO-263 MSL1, IPC/JEDEC J-STD-020A

IOUT_MAX -10 30 A
-55 150
225 °C

Lead temperature TO-220 soldering, 10 seconds ESD rating Human body model

TL ESD

IEC climatic category DIN EN 60068-1
55/150/56 -
* The positive peak voltage = the voltage overshoot during switching transients at the VCC pins and
the OUT pin/tab is limited by the Integrated Switch itself pls., see the “Over-voltage protection of

VCC” paragraph

Thermal Characteristic Parameter

Thermal resistance, junctions-case Thermal resistance, junctions-ambient, leaded

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived TDA21201-P7 Datasheet file may be downloaded here without warranties.

Datasheet ID: TDA21201-P7 638697