DSEC16-12A

DSEC16-12A Datasheet

DSEC 16-12A

Part	Datasheet
DSEC16-12A	DSEC16-12A (pdf)

PDF Datasheet Preview
DSEC 16-12A HiPerFREDTM Epitaxial Diode with common cathode and soft recovery IFAV = 2x 10 A VRRM = 1200 V trr = 40 ns VRSM V 1200 VRRM V 1200 Type DSEC 16-12A TO-220 AB C TAB IFRMS IFAVM IFRM IFSM EAS IAR TVJ TVJM Tstg Ptot Md Weight Test Conditions Maximum Ratings TC = 115°C rectangular, d = tP < 10 µs rep. rating, pulse width limited by TVJM tbd TVJ = 45°C tp = 10 ms 50 Hz , sine TVJ = 25°C non-repetitive IAS = 8 A L = 180 µH VA = 1.25•VR typ. f = 10 kHz repetitive TC = 25°C mounting torque Nm lb.in. typical RthJC RthCH trr Test Conditions TVJ = 25°C VR = VRRM TVJ = 150°C VR = VRRM IF = 10 A TVJ = 150°C TVJ = 25°C IF = 1 A -di/dt = 50 A/µs VR = 30 V TVJ = 25°C VR = 100 V IF = 12 A -diF/dt = 100 A/µs TVJ = 100°C Characteristic Values typ. max. Pulse test x Pulse Width = 5 ms, Duty Cycle < % y Pulse Width = 300 µs, Duty Cycle < % Data according to IEC 60747 and per diode unless otherwise specified IXYS reserves the right to change limits, test conditions and dimensions. 1999 IXYS All rights reserved A = Anode, C = Cathode, TAB = Cathode q International standard package q Planar passivated chips q Very short recovery time q Extremely low switching losses q Low IRM-values q Soft recovery behaviour q Epoxy meets UL 94V-0 q Antiparallel diode for high frequency switching devices q Antisaturation diode q Snubber diode q Free wheeling diode in converters and motor control circuits q Rectifiers in switch mode power supplies SMPS q Inductive heating q Uninterruptible power supplies UPS q Ultrasonic cleaners and welders Advantages

PDF Datasheet Preview

DSEC 16-12A

HiPerFREDTM Epitaxial Diode
with common cathode and soft recovery

IFAV = 2x 10 A VRRM = 1200 V trr = 40 ns

VRSM V
1200

VRRM V
1200

Type DSEC 16-12A

TO-220 AB

C TAB

IFRMS IFAVM IFRM IFSM EAS

IAR TVJ TVJM Tstg Ptot Md

Weight

Test Conditions

Maximum Ratings

TC = 115°C rectangular, d =
tP < 10 µs rep. rating, pulse width limited by TVJM tbd

TVJ = 45°C tp = 10 ms 50 Hz , sine

TVJ = 25°C non-repetitive IAS = 8 A L = 180 µH

VA = 1.25•VR typ. f = 10 kHz repetitive

TC = 25°C mounting torque

Nm lb.in.
typical

RthJC RthCH trr

Test Conditions

TVJ = 25°C VR = VRRM TVJ = 150°C VR = VRRM IF = 10 A TVJ = 150°C

TVJ = 25°C

IF = 1 A -di/dt = 50 A/µs VR = 30 V TVJ = 25°C VR = 100 V IF = 12 A -diF/dt = 100 A/µs TVJ = 100°C

Characteristic Values typ. max.

Pulse test x Pulse Width = 5 ms, Duty Cycle < % y Pulse Width = 300 µs, Duty Cycle < %

Data according to IEC 60747 and per diode unless otherwise specified

IXYS reserves the right to change limits, test conditions and dimensions.
1999 IXYS All rights reserved

A = Anode, C = Cathode, TAB = Cathode
q International standard package q Planar passivated chips q Very short recovery time q Extremely low switching losses q Low IRM-values q Soft recovery behaviour q Epoxy meets UL 94V-0
q Antiparallel diode for high frequency switching devices
q Antisaturation diode q Snubber diode q Free wheeling diode in converters
and motor control circuits q Rectifiers in switch mode power
supplies SMPS q Inductive heating q Uninterruptible power supplies UPS q Ultrasonic cleaners and welders

Advantages

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived DSEC16-12A Datasheet file may be downloaded here without warranties.

Datasheet ID: DSEC16-12A 644163