ICE3DS01L

ICE3DS01L Datasheet

ICE3DS01L ICE3DS01LG

Part	Datasheet
ICE3DS01L	ICE3DS01L (pdf)

Related Parts	Information
ICE3DS01LG	ICE3DS01LG

PDF Datasheet Preview
Datasheet, Version 15 Nov 2005 PWM-FF IC ICE3DS01L ICE3DS01LG Off-Line SMPS Current Mode Controller with integrated 500V Startup Cell Power Management & Supply Never stop thinking. ICE3DS01L G 2005-11-15 Previous Version: update to PB-free package Datasheet For questions on technology, delivery and prices please contact the Infineon Technologies Offices in Germany or the Infineon Technologies Companies and Representatives worldwide see our webpage at CoolMOS , CoolSET are trademarks of Infineon Technologies AG. Edition 2005-11-15 Published by Infineon Technologies AG, St.-Martin-Strasse 53, D-81541 München Infineon Technologies AG All Rights Reserved. Attention please! The information herein is given to describe certain components and shall not be considered as warranted characteristics. Terms of delivery and rights to technical change reserved. We hereby disclaim any and all warranties, including but not limited to warranties of non-infringement, regarding circuits, descriptions and charts stated herein. Infineon Technologies is an approved CECC manufacturer. Information For further information on technology, delivery terms and conditions and prices please contact your nearest Infineon Technologies Office in Germany or our Infineon Technologies Representatives worldwide see address list . Warnings Due to technical requirements components may contain dangerous substances. For information on the types in question please contact your nearest Infineon Technologies Office. Infineon Technologies Components may only be used in life-support devices or systems with the express written approval of Infineon Technologies, if a failure of such components can reasonably be expected to cause the failure of that life-support device or system, or to affect the safety or effectiveness of that device or system. Life support devices or systems are intended to be implanted in the human body, or to support and/or maintain and sustain and/or protect human life. If they fail, it is reasonable to assume that the health of the user or other persons may be endangered. Off-Line SMPS Current Mode Controller with integrated 500V Startup Cell ICE3DS01L ICE3DS01LG Product Highlights • Active Burst Mode to reach the lowest Standby Power Requirements < 100mW PG-DIP-8-6 test • Latched Off Mode to increase Robustness and Safety of the System • Adjustable Blanking Window for High Load Jumps to increase Reliability • PB-free Plating and RoHS compilance PG-DSO-8-8 P-DSO-8-3, -6 • Active Burst Mode for lowest Standby Power light load controlled by Feedback Signal • Fast Load Jump Response in Active Burst Mode • 500V Startup Cell switched off after Start Up • 110kHz internally fixed Switching Frequency • Latched Off Mode for Overtemperature Detection • Latched Off Mode for Overvoltage Detection • Latched Off Mode for Short Winding Detection • Auto Restart Mode for Overload and Open Loop • Auto Restart Mode for VCC Undervoltage • User defined Soft Start • Minimum of external Components required • Max Duty Cycle 72% • Overall Tolerance of Current Limiting < ±5% • Internal Leading Edge Blanking • Soft driving for Low EMI The F3 Controller provides Active Burst Mode to reach the lowest Standby Power Requirements <100mW at no load. As during Active Burst Mode the controller is always active there is an immediate response on load jumps possible without any black out in the SMPS. In Active Burst Mode the ripple of the output voltage can be reduced Furthermore Latched Off Mode is entered in case of Overtemperature, Overvoltage or Short Winding. If Latched Off Mode is entered only the disconnection from the main line can reset the Controller. Auto Restart Mode is entered in case of failure modes like open loop or overload. By means of the internal precise peak current limitation the dimension of the transformer and the secondary diode can be lower which leads to more cost efficiency. An adjustable blanking window prevents the IC from entering Auto Restart Mode or Active Burst Mode in case of high Load Jumps. 85 270 VAC CBulk CVCC

PDF Datasheet Preview

Datasheet, Version 15 Nov 2005

PWM-FF IC

ICE3DS01L ICE3DS01LG

Off-Line SMPS Current Mode Controller with integrated 500V Startup Cell

Power Management & Supply

Never stop thinking.

ICE3DS01L G
2005-11-15

Previous Version:
update to PB-free package

Datasheet

For questions on technology, delivery and prices please contact the Infineon Technologies Offices in Germany or the Infineon Technologies Companies and Representatives worldwide see our webpage at

CoolMOS , CoolSET are trademarks of Infineon Technologies AG.

Edition 2005-11-15

Published by Infineon Technologies AG, St.-Martin-Strasse 53, D-81541 München

Infineon Technologies AG

All Rights Reserved.

Attention please!

The information herein is given to describe certain components and shall not be considered as warranted characteristics. Terms of delivery and rights to technical change reserved. We hereby disclaim any and all warranties, including but not limited to warranties of non-infringement, regarding circuits, descriptions and charts stated herein. Infineon Technologies is an approved CECC manufacturer.

Information

For further information on technology, delivery terms and conditions and prices please contact your nearest Infineon Technologies Office in Germany or our Infineon Technologies Representatives worldwide see address list .

Warnings

Due to technical requirements components may contain dangerous substances. For information on the types in question please contact your nearest Infineon Technologies Office. Infineon Technologies Components may only be used in life-support devices or systems with the express written approval of Infineon Technologies, if a failure of such components can reasonably be expected to cause the failure of that life-support device or system, or to affect the safety or effectiveness of that device or system. Life support devices or systems are intended to be implanted in the human body, or to support and/or maintain and sustain and/or protect human life. If they fail, it is reasonable to assume that the health of the user or other persons may be endangered.

Off-Line SMPS Current Mode Controller with integrated 500V Startup Cell

ICE3DS01L ICE3DS01LG

Product Highlights
• Active Burst Mode to reach the lowest Standby Power Requirements < 100mW

PG-DIP-8-6
test
• Latched Off Mode to increase Robustness and

Safety of the System
• Adjustable Blanking Window for High Load

Jumps to increase Reliability
• PB-free Plating and RoHS compilance

PG-DSO-8-8

P-DSO-8-3, -6
• Active Burst Mode for lowest Standby Power light load controlled by Feedback Signal
• Fast Load Jump Response in Active Burst Mode
• 500V Startup Cell switched off after Start Up
• 110kHz internally fixed Switching Frequency
• Latched Off Mode for Overtemperature Detection
• Latched Off Mode for Overvoltage Detection
• Latched Off Mode for Short Winding Detection
• Auto Restart Mode for Overload and Open Loop
• Auto Restart Mode for VCC Undervoltage
• User defined Soft Start
• Minimum of external Components required
• Max Duty Cycle 72%
• Overall Tolerance of Current Limiting < ±5%
• Internal Leading Edge Blanking
• Soft driving for Low EMI

The F3 Controller provides Active Burst Mode to reach the lowest Standby Power Requirements <100mW at no load. As during Active Burst Mode the controller is always active there is an immediate response on load jumps possible without any black out in the SMPS. In Active Burst Mode the ripple of the output voltage can be reduced Furthermore Latched Off Mode is entered in case of Overtemperature, Overvoltage or Short Winding. If Latched Off Mode is entered only the disconnection from the main line can reset the Controller. Auto Restart Mode is entered in case of failure modes like open loop or overload. By means of the internal precise peak current limitation the dimension of the transformer and the secondary diode can be lower which leads to more cost efficiency. An adjustable blanking window prevents the IC from entering Auto Restart Mode or Active Burst Mode in case of high Load Jumps.
85 270 VAC

CBulk

CVCC

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived ICE3DS01L Datasheet file may be downloaded here without warranties.

Datasheet ID: ICE3DS01L 638056