ESD8V0R1B02ELE6327XTMA1

ESD8V0R1B02ELE6327XTMA1 Datasheet


ESD8V0R1B Series

Part Datasheet
ESD8V0R1B02ELE6327XTMA1 ESD8V0R1B02ELE6327XTMA1 ESD8V0R1B02ELE6327XTMA1 (pdf)
Related Parts Information
ESD8V0R1B02ELSE6327XTSA1 ESD8V0R1B02ELSE6327XTSA1 ESD8V0R1B02ELSE6327XTSA1
ESD8V0R1B-02EL E6433 ESD8V0R1B-02EL E6433 ESD8V0R1B-02EL E6433
PDF Datasheet Preview
TVS Diodes

Transient Voltage Suppressor Diodes

ESD8V0R1B Series

Bi-directional Low Capacitance TVS Diode

ESD8V0R1B-02EL ESD8V0R1B-02ELS

Data Sheet

Industrial and Multi-Market

Edition 2010-12-15

Published by Infineon Technologies AG 81726 Munich, Germany
2010 Infineon Technologies AG All Rights Reserved.

Legal Disclaimer

The information given in this document shall in no event be regarded as a guarantee of conditions or characteristics. With respect to any examples or hints given herein, any typical values stated herein and/or any information regarding the application of the device, Infineon Technologies hereby disclaims any and all warranties and liabilities of any kind, including without limitation, warranties of non-infringement of intellectual property rights of any third party.

Information

For further information on technology, delivery terms and conditions and prices, please contact the nearest Infineon Technologies Office

Warnings

Due to technical requirements, components may contain dangerous substances. For information on the types in question, please contact the nearest Infineon Technologies Office. Infineon Technologies components may be used in life-support devices or systems only with the express written approval of Infineon Technologies, if a failure of such components can reasonably be expected to cause the failure of that life-support device or system or to affect the safety or effectiveness of that device or system. Life support devices or systems are intended to be implanted in the human body or to support and/or maintain and sustain and/or protect human life. If they fail, it is reasonable to assume that the health of the user or other persons may be endangered.

ESD8V0R1B Series

Other Trademarks Advance Design System ADS of Agilent Technologies, AMBA , ARM , MULTI-ICE , PRIMECELL , REALVIEW , THUMB of ARM Limited, UK. AUTOSAR is licensed by AUTOSAR development partnership. Bluetooth of Bluetooth SIG Inc. CAT-iq of DECT Forum. COLOSSUS , FirstGPS of Trimble Navigation Ltd. EMV of EMVCo, LLC Visa Holdings Inc. . EPCOS of Epcos AG. FLEXGO of Microsoft Corporation. FlexRay is licensed by FlexRay Consortium. HYPERTERMINAL of Hilgraeve Incorporated. IEC of Commission Electrotechnique Internationale. IrDA of Infrared Data Association Corporation. ISO of INTERNATIONAL ORGANIZATION FOR STANDARDIZATION. MATLAB of MathWorks, Inc. MAXIM of Maxim Integrated Products, Inc. MICROTEC , NUCLEUS of Mentor Graphics Corporation. Mifare of NXP. MIPI of MIPI Alliance, Inc. MIPS of MIPS Technologies, Inc., USA. muRata of MURATA MANUFACTURING CO., MICROWAVE OFFICE MWO of Applied Wave Research Inc., OmniVision of OmniVision Technologies, Inc. Openwave Systems Inc. RED HAT Red Hat, Inc. RFMD RF Micro Devices, Inc. SIRIUS of Sirius Sattelite Radio Inc. SOLARIS of Sun Microsystems, Inc. SPANSION of Spansion LLC Ltd. Symbian of Symbian Software Limited. TAIYO YUDEN of Taiyo Yuden Co. TEAKLITE of CEVA, Inc. TEKTRONIX of Tektronix Inc. TOKO of TOKO KABUSHIKI KAISHA TA. UNIX of X/Open Company Limited. VERILOG , PALLADIUM of Cadence Design Systems, Inc. VLYNQ of Texas Instruments Incorporated. VXWORKS , WIND RIVER of WIND RIVER SYSTEMS, INC. ZETEX of Diodes Zetex Limited. Last Trademarks Update 2010-06-09

Final Data Sheet

ESD8V0R1B Series

Table of Contents

Table of Contents

Table of Contents 4

List of Figures 5

List of Tables 6

Bi-directional Low Capacitance TVS Diode 7

Features 7

Application Examples 7

Product Description 7

Characteristics 8

Electrical Characteristics at TA = 25 °C, unless otherwise specified 8

Typical Performance characteristics at TA = 25 °C, unless otherwise specified 10

Application Information 12
Ordering information scheme 13

Package Information 14

PG-TSLP-2-18 14

PG-TSSLP-2-2 15

Terminology 16

Final Data Sheet

ESD8V0R1B Series

List of Figures

List of Figures

Figure 1 Figure 2 Figure 3 Figure 4 Figure 5 Figure 6 Figure 7 Figure 8 Figure 9 Figure 10 Figure 11 Figure 12 Figure 13 Figure 14 Figure 15 Figure 16
a Pin Configuration and b Schematic Diagram 7 Definitions of electrical characteristics 8
1 Line, bi-directional protection with ESD diode 12 Ordering Information Scheme examples 13 PG-TSLP-2-18 Package Overview 14 PG-TSLP-2-18 Footprint 14 PG-TSLP-2-18 Packing 14 PG-TSLP-2-18 Marking example 14 PG-TSSLP-2-2 Package Overview 15 PG-TSSLP-2-2 Footprint 15 PG-TSSLP-2-2 Packing. 15 PG-TSSLP-2-2 Marking example 15

Final Data Sheet

ESD8V0R1B Series

List of Tables

List of Tables

Table 1 Table 2 Table 3 Table 4 Table 5
Ordering information 7

Maximum Rating at TA = 25 °C, unless otherwise specified. 8 DC characteristics at TA = 25 °C, unless otherwise specified 8 RF characteristics at TA = 25 °C, unless otherwise specified 9 ESD characteristics at TA = 25 °C, unless otherwise specified 9

Final Data Sheet

ESD8V0R1B Series

Bi-directional Low Capacitance TVS Diode

Bi-directional Low Capacitance TVS Diode
• ESD / Transient protection of data lines in / 5 / 12 V applications according to :
• IEC61000-4-2 ESD ±20 kV air and ±18 kV contact
• IEC61000-4-4 EFT 40 A 5/50ns
• Extremely small form factor down to x
• Pb-free and Halogen-Free package RoHS compliant

Application Examples
• Keypad, touchpad, buttons, convenience keys
• LCD displays, Camera, audio lines, mobile communication, Consumer products E-Book, MP3, DVD, DSC,
• Notebooks tablets and desktop computers and their peripherals

Product Description

Pin 1

Pin 2

Pin 1

TSLP - 2

Pin 2

Figure 1

TSSLP -2
a Pin configuration
a Pin Configuration and b Schematic Diagram
Table 1 Ordering information

Type

Package

ESD8V0R1B-02EL PG-TSLP-2-18

ESD8V0R1B-02ELS PG-TSSLP-2-2

Configuration 1 line, bi-directional 1 line, bi-directional

Pin 2

Pin 1 b Schematic diagram

Marking code R D

Final Data Sheet

Characteristics

ESD8V0R1B Series

Characteristics

Table 2 Maximum Rating at TA = 25 °C, unless otherwise specified

Parameter

Values

Min.

Typ.

ESD air discharge1

VESD

ESD contact discharge1

VESD

Peak pulse current tp = 8/20 us 2 IPP

Operating temperature

Storage temperage

Tstg
1 VESD according to IEC61000-4-2 IPP according to IEC61000-4-5

Max. 20 18 1 150

Unit
kV A °C °C

Electrical Characteristics at TA = 25 °C, unless otherwise specified

Rdyn Differential series resistance

I IPP

IPP Peak pulse current tP=8/20us typ.

Rdyn

Figure 2

VCL VBR VRWM

IBR IRWM

IRWM IBR

VRWM VBR VCL

Pin 2
Ordering information scheme

ESD8V0R1B Series
Ordering information scheme

ESD 0P1 RF - XX YY

Package XX = Pin number i.e. 02 = 2 pins 03 = 3 pins YY = Package family LS = TSSLP LRH = TSLP

For Radio Frequency Applications

Line Capacitance CL in pF i.e. 0P1 = 0.1pF

ESD 5V3 U n U - XX YY

Package or Application XX = Pin number i.e. 02 = 2 pins 03 = 3 pins YY = Package family LS = TSSLP LRH = TSLP S = SOT363 U = SC74

XX = Application family LC = Low Clamp HDMI

Uni- / Bi-directional orRail to Rail protection

Number of protected lines i.e. 1 = 1 line 4 = 4 lines

Capacitance Standard >10pF , Low <10pF , Ultra-low <1pF
Maximum working voltage VRWM in V i.e. 5V3 = 5.3V Figure 8 Ordering Information Scheme examples

Final Data Sheet

Package Information

ESD8V0R1B Series

Package Information

PG-TSLP-2-18

Top view

MAX.

Bottom view

Cathode marking

Figure 9
1 Dimension applies to plated terminals

PG-TSLP-2-18 Package Overview

TSLP-2-18-PO V01

Copper Solder mask Figure 10 PG-TSLP-2-18 Footprint

Stencil apertures

TSLP-2-18-FP V01

Cathode marking Figure 11 PG-TSLP-2-18 Packing

TSLP-2-18-TP V01

Type code

Cathode marking

TSLP-2-18-MK V01

Figure 12 PG-TSLP-2-18 Marking example

Final Data Sheet

ESD8V0R1B Series

PG-TSSLP-2-2

Package Information

Top view

Bottom view

Cathode marking
1 Dimension applies to plated terminal Figure 13 PG-TSSLP-2-2 Package Overview

TSSLP-2-1,-2-PO V05

Copper Solder mask Figure 14 PG-TSSLP-2-2 Footprint

Stencil apertures

TSSLP-2-1,-2-FP V02

Cathode
marking

Tape type

Ex Ey

Punched Tape

Embossed Tape
More datasheets: IRGP4263D-EPBF | IRGP4263DPBF | DCM37PDA101 | 58C15K | CA3102R20-15P | LTL-533-11P2 | ESTW015A0A41Z | ESTW015A0A41-HZ | ESTW015A0A41-SZ | ESD8V0R1B02ELSE6327XTSA1


Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived ESD8V0R1B02ELE6327XTMA1 Datasheet file may be downloaded here without warranties.

Datasheet ID: ESD8V0R1B02ELE6327XTMA1 638009