ESTW015A0A41-HZ

ESTW015A0A41-HZ Datasheet

ESTW015A0A Barracuda Series DC-DC Converter Power Modules

Part	Datasheet
ESTW015A0A41-HZ	ESTW015A0A41-HZ (pdf)

Related Parts	Information
ESTW015A0A41Z	ESTW015A0A41Z
ESTW015A0A41-SZ	ESTW015A0A41-SZ

PDF Datasheet Preview
Data Sheet ESTW015A0A Barracuda Series DC-DC Converter Power Modules 36-75Vdc Input 5.0Vdc, 15A, 75W Output Distributed Power Architectures Wireless Networks Access and Optical Network Equipment Industrial Equipment Options Negative Remote On/Off logic preferred Over current/Over temperature/Over voltage protections Auto-restart preferred Heat plate versions -H Surface Mount version -S directly to top side of module ULRecognized to UL60950-1, CAN/CSA† C22.2 No.60950-1, and EN60950-1 VDE 0805-1 Licensed CE mark meets 2006/95/EC directive§ Meets the voltage and current requirements for ETSI 300- 132-2 and complies with and licensed for Basic insulation rating per EN60950-1 2250 Vdc Isolation tested in compliance with IEEE PoE standards ISO9001 and ISO 14001 certified manufacturing facilities The ESTW015A0A [Barracuda ] Series, eighth-brick, low-height power modules are isolated dc-dc converters which provide a single, precisely regulated output voltage over an wide input voltage range of 36-75Vdc. The ESTW015A0A provides 5Vdc nominal output voltage rated for 15Adc output current. The module incorporates GE’s vast heritage for reliability and quality, while also using the latest in technology, and component and process standardization to achieve highly competitive cost. The open frame module construction, available in both surface-mount and through-hole packaging, enable designers to develop cost and space efficient solutions. The module achieves typical full load efficiency greater than 90% at VIN=48Vdc. Standard features include remote On/Off, remote sense, output voltage adjustment, overvoltage, overcurrent and overtemperature protection. An optional heat plate allows for external standard, eighth-brick heat sink attachment to achieve higher output current in high temperature applications. UL is a registered trademark of Underwriters Laboratories, Inc. † CSA is a registered trademark of Canadian Standards Association. VDE is a trademark of Verband Deutscher Elektrotechniker e.V. § This product is intended for integration into end-user equipment All of the required procedures of end-use equipment should be followed. ¤ IEEE and 802 are registered trademarks of the Institute of Electrical and Electronics Engineers, Incorporated. ** ISO is a registered trademark of the International Organization of Standards March 28, 2013 2012 General Electric Company. All rights reserved. Data Sheet ESTW015A0A Barracuda Series DC-DC Converter Power Modules 36-75Vdc Input 5.0Vdc, 15A, 75W Output Absolute Maximum Ratings Stresses in excess of the absolute maximum ratings can cause permanent damage to the device. These are absolute stress ratings only, functional operation of the device is not implied at these or any other conditions in excess of those given in the operations sections of the data sheet. Exposure to absolute maximum ratings for extended periods can adversely affect the device reliability. Parameter Device Symbol Unit Input Voltage Continuous Transient, operational ms Operating Ambient Temperature Maximum Heat Plate Operating Temperature see Thermal Considerations section VIN,trans Altitude* 4000 Storage Temperature Tstg I/O Isolation voltage 100% factory Hi-Pot tested 2250 * For higher altitude applications, contact your GE Sales Representative for alternative conditions of use. Electrical Specifications Unless otherwise indicated, specifications apply over all operating input voltage, resistive load, and temperature conditions. Parameter Operating Input Voltage Maximum Input Current VIN= VIN, min to VIN, max, VO= VO, set, IO=IO, max Input No Load Current VIN = 48V, IO = 0, module enabled Input Stand-by Current VIN = 48V, module disabled Device Symbol Unit IIN,No load Ordering Information Please contact your GE Sales Representative for pricing, availability and optional features. Table Device Codes Product Codes Input Voltage Output On/Off Voltage Current Logic Connector Type ESTW015A0A41Z 48V 36-75Vdc 5.0V 15A Negative Through hole ESTW015A0A41-HZ 48V 36-75Vdc 5.0V 15A Negative Through hole ESTW015A0A41-SZ 48V 36-75Vdc 5.0V 15A Negative Surface mount Comcodes 150031193 150031191 150031192 Table Device Coding Scheme and Options March 28, 2013 Contact Us For more information, call us at USA/Canada +1 888 546 3243, or +1 972 244 9288 Asia-Pacific Europe, Middle-East and Africa India: 2012 General Electric Company. All rights reserved. Version

PDF Datasheet Preview

Data Sheet

ESTW015A0A Barracuda Series DC-DC Converter Power Modules
36-75Vdc Input 5.0Vdc, 15A, 75W Output

Distributed Power Architectures Wireless Networks Access and Optical Network Equipment Industrial Equipment

Options

Negative Remote On/Off logic preferred Over current/Over temperature/Over voltage
protections Auto-restart preferred Heat plate versions -H Surface Mount version -S
directly to top side of module UL*Recognized to UL60950-1, CAN/CSA† C22.2 No.60950-1,
and EN60950-1 VDE 0805-1 Licensed CE mark meets 2006/95/EC directive§ Meets the voltage and current requirements for ETSI 300-
132-2 and complies with and licensed for Basic insulation rating per EN60950-1 2250 Vdc Isolation tested in compliance with IEEE PoE standards ISO**9001 and ISO 14001 certified manufacturing facilities

The ESTW015A0A [Barracuda ] Series, eighth-brick, low-height power modules are isolated dc-dc converters which provide a single, precisely regulated output voltage over an wide input voltage range of 36-75Vdc. The ESTW015A0A provides 5Vdc nominal output voltage rated for 15Adc output current. The module incorporates GE’s vast heritage for reliability and quality, while also using the latest in technology, and component and process standardization to achieve highly competitive cost. The open frame module construction, available in both surface-mount and through-hole packaging, enable designers to develop cost and space efficient solutions. The module achieves typical full load efficiency greater than 90% at VIN=48Vdc. Standard features include remote On/Off, remote sense, output voltage adjustment, overvoltage, overcurrent and overtemperature protection. An optional heat plate allows for external standard, eighth-brick heat sink attachment to achieve higher output current in high temperature applications.
* UL is a registered trademark of Underwriters Laboratories, Inc. † CSA is a registered trademark of Canadian Standards Association. VDE is a trademark of Verband Deutscher Elektrotechniker e.V. § This product is intended for integration into end-user equipment All of the required procedures of end-use equipment should be followed. ¤ IEEE and 802 are registered trademarks of the Institute of Electrical and Electronics Engineers, Incorporated. ** ISO is a registered trademark of the International Organization of Standards

March 28, 2013
2012 General Electric Company. All rights reserved.

Data Sheet

ESTW015A0A Barracuda Series DC-DC Converter Power Modules
36-75Vdc Input 5.0Vdc, 15A, 75W Output

Absolute Maximum Ratings

Stresses in excess of the absolute maximum ratings can cause permanent damage to the device. These are absolute stress ratings only, functional operation of the device is not implied at these or any other conditions in excess of those given in the operations sections of the data sheet. Exposure to absolute maximum ratings for extended periods can adversely affect the device reliability.

Parameter

Device Symbol

Unit

Input Voltage Continuous Transient, operational ms

Operating Ambient Temperature Maximum Heat Plate Operating Temperature
see Thermal Considerations section

VIN,trans

Altitude*
4000

Storage Temperature

Tstg

I/O Isolation voltage 100% factory Hi-Pot tested
2250
* For higher altitude applications, contact your GE Sales Representative for alternative conditions of use.

Electrical Specifications

Unless otherwise indicated, specifications apply over all operating input voltage, resistive load, and temperature conditions.

Parameter Operating Input Voltage Maximum Input Current VIN= VIN, min to VIN, max, VO= VO, set, IO=IO, max Input No Load Current

VIN = 48V, IO = 0, module enabled Input Stand-by Current

VIN = 48V, module disabled

Device Symbol

Unit

IIN,No load
Ordering Information

Please contact your GE Sales Representative for pricing, availability and optional features.

Table Device Codes

Product Codes

Input Voltage

Output On/Off Voltage Current Logic

Connector Type

ESTW015A0A41Z
48V 36-75Vdc
5.0V 15A Negative

Through hole

ESTW015A0A41-HZ
48V 36-75Vdc
5.0V 15A Negative

Through hole

ESTW015A0A41-SZ
48V 36-75Vdc
5.0V 15A Negative Surface mount

Comcodes
150031193 150031191 150031192

Table Device Coding Scheme and Options

March 28, 2013

Contact Us

For more information, call us at USA/Canada +1 888 546 3243, or +1 972 244 9288 Asia-Pacific Europe, Middle-East and Africa India:
2012 General Electric Company. All rights reserved.

Version

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived ESTW015A0A41-HZ Datasheet file may be downloaded here without warranties.

Datasheet ID: ESTW015A0A41-HZ 645638